Maintained! Audionics of Oregon power amplifier RF regular, 117V specification In Japan, it is an American manufacturer imported by R.F. Enterprises under the name Audio of Oregon. A thick, low center of gravity sound with a punchy sound. It is an American sound suitable for jazz and rock. It can also be used as a mono power amplifier. There are exterior, dullness, small scratches, scratches on the top plate, etc. ※The plug has been changed. (YONEJIMA Satoshi)
Maintenance information: 2024.4.13 Maintained (main amplifier circuit resistor replacement. Idling current misalignment adjustment. (Distortion level check)
Accessories: No accessories
Main specifications: 170W+170W (2Ω) 120W+120W (4Ω) 70W+70W (8Ω) 225W (8Ω, when connected to BTL) AC117V 50Hz/60Hz dimensions W483 × H89 × D216 mm weight 7.7 kg
Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defects have been fixed. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been drastically reduced! 2024/4/13 sales price 128,000 yen Maintained! 800Hz/2 way specification This is the balanced input/output model of the F-15. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. You can adjust the multi-system correctly with clean, clutter-free sound. There are scratches and scratches on the exterior. Serial K8Y452 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 maintained (AC cord, push switch replacement, ATT disassembly cleaning, card edge contact cleaning, crossover characteristic check, interior and exterior cleaning)
Accessories: instruction manual
Main specifications: 2 way/3 way divider input/output RCA/XLR switching type frequency fixed by board W445 x H109 x D373 mm 9.1 kg
Maintained by the manufacturer! Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull. Serial T53Z081.2004406 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 manufacturer maintained (pickup, spindle belt replacement, Assy shaft disassembly and cleaning, grease up, confirmation of regeneration operation on an inspection disc)
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
※It has a cigarette smell, so it's cheap. A full digital amplifier from the hidden masterpiece Fob, which will be in stock for the first time at Hi-Fi Hall, is here! Equipped with Sony's S-Master PRO. The inputs are 2 digital coaxial systems, 4 optical and composite systems in total, and 2 analog systems. Smooth, spacious, and quiet sound quality. It is a digital amplifier for enthusiasts that has a high SNR feel and allows you to feel high quality even when the volume is low. The exterior is dull all over, and there are scratches on the top plate (Yonejima Satoshi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: power cable
Main specifications: 100W x 2ch (4Ω) W430 x H98 x D365 mm weight 10.2 kg
The price has been drastically reduced! 2024/4/13 sales price 348,000 yen ※ It is cheap because it is in poor condition such as deposits, scratches, tobacco smell, etc. A power amplifier that enables overwhelming spatial expression with a second-generation ultra-high speed switching power supply. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. The exterior is dull all over, and there are abrasions on the top plate and front (Yonejima Satoshi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: connection cord, power cable
Main specifications: 150W+150W (8Ω) input/unbalance (RCA) 1 system/balanced (XLR) 1 system SP terminal/1 system main unit W445 x H97 x D335 mm power supply unit W445 x H97 x D319 mm body 13.5 kg power supply 13.7 kg
The price has been reduced! 2024/4/13 sales price 228,000 yen*It is cheap because it has a tobacco smell. 4K UHD Blu-ray disc player. Developed by combining the experience and technology for advanced video processing and high-fidelity sound reproduction that OPPO Digital has cultivated over 10 years. It works as an ideal source component for building the latest home theater audio systems. The exterior has dullness, scratches, etc. Serial B210J61749081749 (Yonejima Satoshi)
Maintenance information: 2024.4.13 Operation confirmed (video system not checked)
Accessories: remote control, power cable
Main specifications: Compatible disc types UHD Blu-ray, Blu-ray, Blu-ray 3D, DVD video, DVD audio, AVCHD, SACD, CD, Kodak picture CD, CD-R/RW, DVD±R RW, DVD±R DL, BD-R/RE BD profile BD-ROM version 3.1 Profile 6 (and BD-ROM version 2.5 Profile 5) User-created discs are warranty-compatible external output analog audio 7.1 ch, 5.1 ch, stereo output 2 channels of coaxial optical digital audio, PCM up to 192 kHz, PCM up to 192 kHz, DSD up to 5.1 channels, bit stream W430 x H123 x D311 mm 10 kg
※It has a cigarette smell, so it's cheap. A network player compatible with Roon Ready and MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. It also plays DSD 22.5 MHz when used as a USBDAC. Since it also has volume, it can also be used as a digital preamp. The exterior has a slight smell of threads and tobacco. Serial 17Y0011 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
※It has a cigarette smell, so it's cheap. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
※It has a cigarette smell, so it's cheap. XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). The exterior has dirt and paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※It is inexpensive because it has a cigarette smell, dirt, and deposits. Premium power amplifier/speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. There are scratches, adhesions, and dirt on the exterior (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
Comes with original box A machined aluminum alloy separate structure and parallel wiring are realized at this price. The SAA-6SZ MK2 uses the latest independent wiring “super separate” and spike legs, and the center outlet uses a rhodium-plated outlet. Highly recommended for those who prefer vivid resolution. Serial A061411MR (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: rhodium outlet x 1, BRYANT outlet x 2 W400 x H70 x D43 mm 2.5 kg
This is a collet chuck stabilizer. Since it is a type where the center spindle is tightened when the center push button is pressed, it can be fixed more reliably. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: 59 mm in diameter x 34 mm in height, weight 164 g
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustments are possible. There is peeling on the horn (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: dead weight 10g
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 10g
It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570Hz,3.5kHz impedance 8Ω allowable input 200W efficiency 90dB size W185 x H1000xD300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
RCA cable, 0.5 m, pearitz coated OCC copper, has a relatively clean tone, and is a product made by Wireworld that is particular about sound quality while keeping costs down. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Next-generation speaker cable using 2.0m pair of untreated 3.4Sq terminals and thick PC-Triple C conductors. It's a modern sound with all three time signatures: high resolution, wide range, and a sense of speed at startup (Tamura Eiji)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. Dullness is dirty (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
The price has been reduced! 2024/4/12 sales price 84,800 yen This is a genuine manufacturer stand for B&W805D3. The logo on the bottom of the stand gives off a sense of luxury. It's designed with sound quality in mind, so I think it's worth trying it out. There is dullness and scuff marks. Serial 1942-0007869/1942-0007869 (Fujisawa Yukishi)
Accessories: instruction manual, rubber foot, spike, fixing screw, hex
Main specifications: W255 x H595 x D370 mm 13 kg
The price has been reduced! 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
XLR noise stopper cap It is for XLR input terminals, and not only prevents broadband noise intrusion from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
Noise stopper for XLR (balanced) output terminals. It not only prevents broadband noise from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
RCA output terminal cap Due to its completely non-magnetic structure, when inserted into the RCA output terminal, it exhibits a high damping effect, and further improves sound image localization and signal-to-noise ratio. (FUJISAWA KOSHI)
Accessories: quartz resonator QR-8
Maintained in January 2023! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. There are scratches and dullness on the exterior. Serial 53A03 (Fujisawa Yukishi)
Maintenance information: 2023.3.1 maintained (sound pressure difference and crosstalk improvement measures → 1/4 W additional resistance, 4 additional switches, poor contact repair for each switch and selector, vacuum tube socket caulking repair, RCA jack polish and caulking repair
* Operation has also been checked with AC 100 to 117 V (Rumble and High Filter have been improved by other companies as a measure to improve sound quality.)
Accessories: No accessories
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Vacuum tube preamp and buffer amplifier. You can enjoy the sound quality of the tube as a buffer amplifier by using or passing the volume control function depending on the device in the previous stage. Serial T11239 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: copy of instruction manual, AC adapter
Main specifications: High-end vacuum tube buffer amplifier and preamplifier (dip switch switching type) input impedance 1 MΩ (direct vacuum tube buffer) 100 kΩ (preamp volume control) W67 x H28 x D 175 mm weight 237 g
*Currently sold. 120V specification. CROWN commercial power amplifier. It features driving power unique to professional use that lifts straight. The high braking power at high volume fully demonstrates the quality of a professional device. The exterior is dull. *There are no fixing brackets for mounting racks. Also, the AC plug has been replaced. Serial 8001294201 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: none
Main specifications: output 25W+25W (8Ω) 120V specification natural air cooling method W483 × H45 × D213 mm 4.5 kg
Woofer edge softening treatment was completed in March 2021! The sharp mid-high range, which is typical of a diamond tone, is characteristic. The low frequency thickness unique to 30 cm is also attractive, so you can enjoy it in all genres. There are some dents on the exterior. Serial 16747/16900 (Yonejima Satoshi)
Maintenance information: 2021.3.6 Maintained (softened)
Accessories: saran net
Main specifications: 3 way 3 speaker sealed impedance 6 Ω playback frequency band 35 Hz-35 kHz crossover 500 Hz/4 kHz maximum input 230 W sound pressure 91 dB W380 x H680 x D325 mm 27 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/11 sales price 148,000 yen ※It is cheap because the condition is poor due to noticeable bumps and frayed saran nets. JBL 60th anniversary model. A tall boy who embodies a wide range of modern JBL sounds. It has a smooth, smooth tone, and is compatible with various genres without difficulty. Of course, you can also enjoy a sense of energy with a punch in the mid to low range. The exterior has blows, scratches, and fissures on Saran (Tamura Eiji)
Maintenance information: 2024.4.11 sweep test good
Accessories: saran net, spikes
Main specifications: 3 way 4 speakers 6Ω 90dB crossover frequency 2.5kHz, 8kHz W260 × H1,130 × D430 mm 35.6 kg
The price has been drastically reduced! 2024/4/10 sales price 159,000 yen Maintained by Taiyo International! JEFF ROWLAND's compact power amplifier, MODEL 102, has arrived. Although it is small, the driving power is high enough with a 100W output. In combination with CAPRI, it shows maximum tonal appeal, and it is a powerful machine that is compatible with various pri even when used alone. One part of the exterior has disappeared, and there are small scratches and bumps. Serial SD0156 (Yonejima Satoshi)
Maintenance information: 2024.4.10 Maintained by the manufacturer (replaced due to lack of capacity of the electrolytic capacitor. (Left and right level and other characteristic tests and running tests are carried out)
Accessories: power cable
Main specifications: 100W+100W (8Ω) frequency characteristics 54-65kHz damping factor 1000 twin mono configuration machined aluminum block W348 x H68.5 x D190 mm 3.4 kg
The price has been reduced! 2024/4/10 sales price 89,800 yen The latest JBL sound with a moderate low range and a clean, clear high range, and delicate and wide range. It is a versatile speaker regardless of genre, with a good balance from low volume to high volume. The exterior has small scratches and creases on the veneer sticker on the top plate (Fujisawa Yukishi)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, spike, spike base
Main specifications: compression driver with 25mm HDI horn frequency characteristics 38 Hz to 40 kHz output sound pressure level 88 dB impedance 6 ohms crossover frequency 600 Hz/1.8 kHz W230 x D300 x H100 mm weight 22.6 kg
The price has been reduced! 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. The efficiency is also good, so it's easy to play, and the chic design with the mirror piano paint shines is characteristic. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
The price has been reduced! 2024/4/9 sales price 69,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 x H200 x D350 mm 3.30 kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT2411 (Fujisawa Yukishi)
Maintenance information: 2024.4.8 Maintained (meter and display lamp replacement (there is slight unevenness in characters due to deterioration of the light guide plate, but this is the current situation) Electrolytic capacitor, rotary SW replacement. Apply heat-resistant tape. Solder correction. Clean card edge contacts, switches, and volumes. Possible panel peeling correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi)
Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω)
Accessories: No accessories
Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
An affordable Lax interconnect cable with attention to detail, such as each core structure that makes the hot and cold of the 1.0 m RCA cable transmission line the same, and a core wire wrapped in Japanese paper. It is characterized by its moderate thickness and good S/N. (YONEJIMA Satoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: No accessories
Every detail from exterior to interior has been maintained! The JBL Studio Monitor 4355 with dedicated channel divider 5235 is in stock for the first time in a long time! The final model of the JBL studio monitor, double woofer. The enclosure volume is the same as 4350, but since the thickness of the top plate etc. is different, the outer dimensions are one size larger, and the presence has increased even more! The front attenuator also has separate MID/TW, making it easy to control. The sense of range and overall sound connection are also excellent, and the sense of volume in the low frequencies is amazing, with only a double woofer. Serial 10136/10186 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, saran net replacement/frame repair, woofer maintenance: edge replacement, cone paper coating, mid-cone paper coating, driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit gap cleaning, sound absorbing material Reupholstery, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT disassembly and cleaning, terminal cleaning/screw replacement, unit detaching/diffuser repair)
Accessories: saran net, diffuser, channel divider 5235
Main specifications: used unit woofer 2235H, midbass 2202H, driver 2241, tweeter 2405H frequency characteristics 31.5 Hz to 18 kHz efficiency 96 dB impedance 290 Hz is 4 ohms, 290 Hz or more is 8 ohms, W1223 x H901 x D510 mm 120 kg
Comes with original box! An A-shell elliptical needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The price has been drastically reduced! 2024/4/6 sales price 218,000 yen ※The exterior is in poor condition, so it's cheap. Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. decomposition contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been drastically reduced! 2024/4/5 sales price 398,000 yen ※Saran net is out of stock. Network maintenance was applied to the tweeter, and an oil finish was applied to exterior maintenance to give it a clean refresh! This model is a rare combination with the 075. A floor-type speaker system that can be grounded vertically or horizontally according to room preferences. It features a well-balanced sound style that you won't get tired of, and the enclosure has plenty of capacity, so you can feel the power of the bass and the depth of the sound. There are repair marks on the exterior. Serial 10927, 10938 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (tweeter maintenance: horn polishing, magnetic circuit gap cleaning, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior repair/polishing/oil finish, front and rear baffle repair/painting)
Accessories: No accessories
Main specifications: D130/075/N2400, 8 ohms, allowable input, 60 W, crossover frequency, 2.5 kHz, measured size W550 x H750 x D390 mm, 46.7 kg