Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
Noise stopper for XLR (balanced) output terminals. It not only prevents broadband noise from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
XLR noise stopper cap It is for XLR input terminals, and not only prevents broadband noise intrusion from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
※1 bottle only. A vertical stand dedicated to the company's 33WER/33WER-S. If you've been looking for one, don't miss this opportunity. (YONEJIMA Satoshi)
Accessories: instruction manual, original box
Main specifications: actual measurement approx. W202 x H65 x D202 mm weight 950 g/unit
A popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. There are scratches and small scratches on the exterior. Serial 10090026 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
※It is inexpensive because there are tar stains. A super tweeter capable of reproducing up to an ultra-high frequency of over 70 kHz. Both output and crossover can be switched in 3 stages. The excellent sound quality and three-dimensional spatial expression typical of JBL are attractive. It supports playback in the ultra-high range of SACD and high-resolution sound sources with plenty of room. ※ Spike holder is not included. The exterior has dullness, discoloration on the back panel, and small scratches. Serial C30391247/C30391248 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter built-in high pass filter 16/20/24kHz switching playback frequency band to 70kHz impedance 8Ω maximum input 50W output sound pressure level 95db W190 x H122 x D173 mm 2.1 kg/unit
A wide FM/AM tuner that uses a dedicated large, high-rigidity chassis and piano-black-finished sidewoods. The aluminum tuning dial, which allows you to enjoy an analog-like sense of operation, makes you feel nostalgic, and FM complementary broadcasts are also perfectly compatible. The reception sensitivity is also good, and it lets you hear thick sound. There are no noticeable scratches on the exterior. Serial Z015995VXR (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: power cord, loop antenna
Main specifications: FM/AM tuner reception frequency: 76.0 to 94.9 MHz (compatible with FM complementary broadcasting) external dimensions W435 x H94 x D450 mm mass 5.8 kg
Maintained by the manufacturer! Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull. Serial T53Z081.2004406 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 manufacturer maintained (pickup, spindle belt replacement, Assy shaft disassembly and cleaning, grease up, confirmation of regeneration operation on an inspection disc)
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D431 ✕ H20mm
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D380 ✕ H20mm Weight 5.6 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
※It has a cigarette smell, so it's cheap. JOB's power conditioner will be in stock for the first time in about 4 years. Genuine Zephan product. Can be used up to 800W. AC noise reduction, sound energy, wide sound field, good sound quality of each one, and improvements in speed can be expected. There are dirt and scratches on the exterior. *One side outputs 100V and the other side outputs 110V. Serial 21103915 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: No accessories
Main specifications: capacity 800 W external dimensions W150 x H55 x D 208 mm 3.22 kg
The disposal price has been reduced! Member prices are not applicable. 2023/4/15 Sales Price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
The first stage is all 4 PASVANE WE310A! This is Sun Valley's Western 91 300B single amp. Anyway, it's an amplifier that clearly expresses even the afterglow, and it has enough power. Although it has an output of 8W+8W, this model is extremely practical and of high quality. It is a power amplifier with a balanced, glossy tone with no excesses or deficiencies from low to high frequencies. There is a scratch on the back of the exterior. Serial 63113 (Yonejima Satoshi)
Maintenance information: 2021.6.13 manufacturer maintained (all metal fittings on the 310A socket have been increased and tightened, looseness of vacuum tube pins and socket fittings fixed) 2020.8.7 manufacturer maintained (as preventive maintenance, hot bond treatment to prevent disconnection is performed on the 310 grid cap solder part, and residual noise, gain, frequency characteristics, and voltage of each part are measured to confirm that there are no abnormalities)
Accessories: power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 (Elehamo) 310A x 4 (PSVANE) 5R4GY ✕ 1 (RCA) W400 x H210 x D300 mm weight 23 kg
A line preamp that uses 2 WE 310A driver tubes and 1 Golden Dragon 5U4G rectifier tube. The rich tone has a strong personality reminiscent of foreign products, and the amount of information is also attractive. It is a compact preamp that has a relatively wide range and is fully compatible with modern speakers. The exterior is slightly dull. (YONEJIMA Satoshi)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: power cord
Main specifications: RCA/5R4GY x 1 WE/310A x 2 W330 x H215 x D250 mm 12.74 kg (actual measurement)
The price has been reduced! 2024/4/10 sales price 89,800 yen The latest JBL sound with a moderate low range and a clean, clear high range, and delicate and wide range. It is a versatile speaker regardless of genre, with a good balance from low volume to high volume. The exterior has small scratches and creases on the veneer sticker on the top plate (Fujisawa Yukishi)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, spike, spike base
Main specifications: compression driver with 25mm HDI horn frequency characteristics 38 Hz to 40 kHz output sound pressure level 88 dB impedance 6 ohms crossover frequency 600 Hz/1.8 kHz W230 x D300 x H100 mm weight 22.6 kg
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Comes with original box! An A-shell elliptical needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
The price has been drastically reduced! 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570Hz,3.5kHz impedance 8Ω allowable input 200W efficiency 90dB size W185 x H1000xD300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is also a masterpiece that gives off its own unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope for convenience. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: diameter 79 mm x height 20 mm weight 730 g
Comes with original box A machined aluminum alloy separate structure and parallel wiring are realized at this price. The SAA-6SZ MK2 uses the latest independent wiring “super separate” and spike legs, and the center outlet uses a rhodium-plated outlet. Highly recommended for those who prefer vivid resolution. Serial A061411MR (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: rhodium outlet x 1, BRYANT outlet x 2 W400 x H70 x D43 mm 2.5 kg
The price has been drastically reduced! 2024/4/14 sales price 198,000 yen This model took the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 278,000 yen The lively sound has been revived through careful maintenance utilizing original capacitors. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. The high frequencies are also connected to a cone-shaped unit, and you can enjoy a variety of music sources with smooth, natural sound. There are repair marks on the top plate and right corner. Serial 98300, 98311 (Fujisawa Yukishi)
Maintenance information: 2023.4.18 maintained (exterior maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice back fabric repair), unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/coating, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), Network maintenance (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~42 khz) was performed, and the original capacitor was continued to be used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type unit 35.5 cm coaxial 2-way (LE14C) network LX2-1 crossover 2,000 Hz impedance 8 ohms W450 x H610 x D346 mm
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 2172380XCK00186 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 217380XCK00185 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
The price has been reduced! 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and paint bald spots. Serial 2172380UGD01107 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg
The price has been reduced! 2024/4/3 sales price 79,800 yen CASTLE's small studio monitor is in stock for the first time at Hi-Fi. A special version of the model that has received high praise since its inception. Even though it is crowned with a monitor, you can feel the high level of texture unique to being made in England that is easy to listen to. You won't get tired of listening to the supple sounds of vocals and strings. The exterior is a saran net, and there are small scratches on the main body. Serial BJH0009 (Yonejima Satoshi)
Maintenance information: 2024.4.3 sweep test good
Accessories: saran net
Main specifications: 2-way rear bass reflex type frequency characteristics 60Hz-20kHz output sound pressure level 88dB rated impedance 8Ω W165 x H280 x D235 mm 5.1 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
A popular ribbon-shaped super tweeter. Since it has a built-in network and high pass filter, it can be easily added to your system. Compatible with ultra-high frequency playback included in SACD and high-resolution sound sources. Rubber sheet marks remain on the top plate. The exterior has dullness, scratches, etc. Serial HI003337 HI003338 (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: Ribbon-type super tweeter 6Ω playback frequency band 9,000 Hz to 120,000 Hz W100 × H102 × D152 mm 1.3 kg/unit
Maintained! An amplifier with a black panel that exudes chic calm. Rather than being glossy like the PRA-2000, it sounds clear and straightforward, and has a sense of unity. It's an excellent product that blends in smoothly no matter what amplifier you combine it with. There are scratches on the exterior. Serial 6111100015 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (PHONO selector, tape monitor selector, SW disassembly contact polishing, cleaning, and grease application due to poor contact between each. (Improved by cleaning the balance VR and main VR contacts, and check the sound output for each other input/output connection.)
Accessories: instruction manual
Main specifications: MC/MM input with CD direct input W466 x H136 x D302 mm 6.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/28 sales price 59,800 yen ※The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it will remain as it is)
Accessories: No accessories
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories