The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
Unspecified mmType cartridge. It's very similar to the cartridge that comes with the DENON DP-500M. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Unopened Replacement needle for Columbia/Denon cartridge, PU-1270, PU-1280, SPC-310 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: dead weight 7g
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
This is a genuine shell that comes with the DP-1300M/DP-500M. Black model with meat removal processing. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
※ It is inexpensive because there are scratches, stains, etc. DENON's current SACD player. A state of the art machine compatible with DSD 11.2 MHz high resolution sound source with USB input. A sense of speed and characteristics typical of a modern aircraft with good resolution have been added to the conventional loose, thick sound quality. Due to the balanced output switching function, there is no problem connecting to overseas amplifiers. There are scratches and stains on the top plate, and there are many scratches and stains on the remote control (Oikawa Tetsuji)
Maintenance information: 2024.4.20 operation confirmed (CD, SACD, HDCD, PCM384k, DSD 11.2 MHz test OK, remote control OK)
Accessories: remote control, instruction manual, power cable
Main specifications: DSD11.2 MHz/PCM384 kHz 32 bit compatible, digital input terminal USB-A x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 1, W434 x H137 x D404 mm 21.4 kg
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. The supple sound makes it comfortable to listen to. The exterior has a feeling of use, such as dullness on the body. Serial 4126 (Hiroki Aso)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: none
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The price has been reduced! 2024/4/20 sales price 39,800 yen maintenance completed item! It looks like a Class A amplifier, and an unmistakable sound pops out from the moment it starts up. Furthermore, it is an attractive car with a glossy high range and a mellow mid range, making the whole sound brighter. The exterior has small scratches and dullness over time. ※The side panel is missing. Serial 308241173 (Yamato Yuki)
Maintenance information: 2023.11.13 maintained (main board solder repair PHONO earth terminal replacement speaker relay deterioration replacement RECOUT selector SW disassembly contact grease coating speaker switching SW disassembly contact cleaning idling adjustment sound output confirmation for each input/output connection)
(Explanation of specifications) There is rattling in the volume knob, but it is not a malfunction due to structural rattling
Accessories: copy of instruction manual
Main specifications: output level 90W+90W, medium output, pure A class, high output, non-switching, class A operation, phono MM/MC switching, dimensions W470 x H167 x D400 mm, weight 12 kg
*Fully auto player with built-in phono equalizer from Denon currently sold. It is recommended for those who want to enjoy records casually without worrying about the location or for beginners. There are scratches on the exterior. Serial 0063373998 (Tamura Eiji)
Maintenance information: 2023.12.8 operation confirmed
Accessories: none
Main Specifications: Fully Auto Player Belt Drive Appropriate Needle Pressure 3.5g W360 ✕ H ✕ D370mm Weight 2.9 kg
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There are scratches on the exterior, front panel, and top plate, overall dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.27 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2023.12.18 operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been reduced. 2023/12/27 sales price 12,000 yen*Currently sold. This speaker has a clear and soft sound using the D.D.L cone woofer used in the CX series. There is a good balance between clean mid and high frequencies that you won't get tired of listening to, and low frequencies that are modest yet don't feel unsatisfactory. The exterior is smelly, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.25 Operation confirmed
Accessories: saran net
Main specifications: 2 way 3 speakers, bass reflex type, anti-magnetic design, 6 ohm, 100 W 30 Hz to 60 kHz 83 db/w/m W224 x H942 x D248 mm 10.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained! Pre-main amplifier with built-in DA converter. An amplifier that allows you to enjoy a gentle, expansive sound like Denon with analog input, and sound quality with a wide range with digital input. This amplifier can also be recommended as an amplifier to be combined with PC audio (Daiki Goto)
Maintenance information: 2024.2.21 maintained (function, recout, digital input, speaker, tape, loudness switch disassembly, polishing grease application, output relay replacement, bus volume replacement, solder repair, various volumes, switch cleaning, interior and exterior inspection and cleaning, digital input/output confirmation, operation confirmation. (*Since the bus volume is similar, the bus lifts slightly when the source is directly off)
Accessories: none
Main specifications: 110W+110W (8Ω) phono (MM/MC switching) 5 digital input systems (coaxial x 3/optical x 2) W434 x H180 x D420 mm 18 kg released in 1989 (Kojima Yosuke)
※Overall, there is dullness, rust, and scratches, and there is a feeling of use, so it is inexpensive. A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. (MIZUSAKI Ryo)
Maintenance information: 2024.1.27 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been reduced! 2024/2/23 sales price 29,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. There are threads and dullness throughout the exterior. Serial 9970 (Hiroki Aso)
Maintenance Information: 2024.2.23 Maintained (head gap adjustment leaf SW cleaning speed adjustment)
Accessories: copy of instruction manual
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Maintained! The PRA-2000ZR is a control amplifier specializing in records, which has a reputation for phono circuits. The sharp sound quality of the MC is attractive. It is an MC2 system/MM1 system, and PHONO1 incorporates a pure focus MC transformer and PHONO2 incorporates a FET configuration head amplifier. The exterior has dullness and small scratches. Serial 6101100050 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (equalizer board repair, transistor replacement, 24V regulator replacement, solder repair, each volume switch cleaning, internal inspection, cleaning, each input/output confirmation, operation inspection tone, there is a popping sound when SW is on and off, but there is no sound interruption, etc.)
Accessories: copy of instruction manual
Main specifications: PHONO3 system (PHONO1/MC PHONO2/MC PHONO3/mm) real-time tone control equalizer amplifier part dimensions W462 x H145 x D385 mm weight 10.6 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A threatening center speaker that supports playback up to 90 kHz. If you are looking for detailed sound, please consider it. Equipped with a direct drive super tweeter. There are 4 corks attached to the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.7 operation confirmed
Accessories: none
Main specifications: 6Ω 80W dimensions W360 x H71 x D163 mm weight 2 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. This tall boy speaker has a slim design and is ideal for subsystems, etc. There is corrosion on the tweeter on one side and there is deterioration on the surface of the mid-range center cap (Sasaki Shota)
Maintenance information: 2024.4.7 operation confirmed
Accessories: none
Main specifications: 3 way 4 speakers, bass reflex type, anti-magnetic design 12 cm cone type woofer x 2 (P.P.D.D. method)/2.5 cm soft dome type tweeter x 1/direct drive type super tweeter x 1 frequency characteristics 40 Hz to 90,000 Hz impedance 6 ohms sound pressure level 90 dB dimensions W175 x H800 x D295 mm weight 14.6 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2024.3.30 Operation confirmed
Accessories: manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The price has been reduced. 2024/3/27 Denon mid-range model with a sales price of 45,000 yen. You can enjoy all genres with good modern response and unobtrusive sound quality. Since it is relatively thin, this model is recommended for those who are concerned about space. Phono is compatible with MM/MC. The exterior has small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, power cable,
Main specifications: rated output 70W+70W (8Ω) dimensions W434 x H134 x D410 mm weight 15.5 kg
* Source Direct SW cover is missing and cannot be used, so it is cheap (it is off). Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. Scratches, dullness, stains, and a feeling of use can be seen on the exterior and front edge (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 maintenance completed (select switch disassembly contact polishing grease applied, direct idling adjustment to the side where SD switch tone can be controlled (using repair auxiliary parts) operation tested)
Accessories: copy of instruction manual
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Maintained! An amplifier with a black panel that exudes chic calm. Rather than being glossy like the PRA-2000, it sounds clear and straightforward, and has a sense of unity. It's an excellent product that blends in smoothly no matter what amplifier you combine it with. There are scratches on the exterior. Serial 6111100015 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (PHONO selector, tape monitor selector SW disassembly contact polishing cleaning/grease application. (Improved by cleaning balanced VR and main VR contacts, check the sound output for each other input/output connection)
Accessories: instruction manual
Main specifications: MC/MM input with CD direct input W466 x H136 x D302 mm 6.3 kg
Although it is a standard model, you can perform SACD playback that is not inferior to higher-level models, and you can clearly experience glossy sound in the mid and low frequencies typical of Denon. Dullness can be seen throughout, but there are no noticeable scratches. Serial 8051508325 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: CD/SACD compatible AL24 Processing playback frequency band 2Hz to 100kHz (SACD) 2Hz to 20kHz (CD) SNR 104dB (SACD) 110dB (CD) W434 × H135 × D331mm 7.6 kg
Maintained by Denon! This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There are small scratches on the exterior. Serial 8061507480 (Tamura Eiji)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu)
Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test)
Accessories: instruction manual, power cord
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Maintained by the manufacturer! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There is dullness and a feeling of use. Serial 1050502942 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 manufacturer maintained (main volume and selector switch disassembly contact cleaning. (Idle current adjustment and operation inspection carried out.)
Accessories: power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
The 3rd generation model of the S10 series. Equipped with analog waveform reproduction technology AL24 Processing. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Hiroki Aso)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations; if it breaks down in the future, pickups cannot be obtained loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
Speaker cable 1.4+2.9 m pair end This is a well-balanced speaker cable, from powerful, unprocessed bass to delicate light sounds. There is a feeling of use such as dirt (Asae Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Denon tonearm DA-401 exclusive headshell. They rarely appear separately, so if you are looking for one, please take this opportunity (Tomoho Asaine)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: dead weight 4 g