AKAI clamper for open reel decks. If you are using an open reel deck, how about using it as a spare one? The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Accessories: None
Main specifications: for No. 10 reel
The disposal price has been reduced! (Not eligible for member discounts) 2022/4/5 Sales price 128,000 yen In recent years, it makes me feel a bit different texture from AccuPhase. Since the value of the damping factor can be switched, it goes well with speakers developed during the heyday of tube amplifiers, and drives well. The appearance has a feeling of use over time, such as small scratches and dullness scattered. Serial L6Y630 (Hiroki Aso)
Maintenance Information: 2022.4.5 Operation confirmed 2016.6.30 Maintenance completed (ATT disassembly cleaning and other SW cleaning. Replace electrolytic capacitors VR replacement for adjustment Output relay disassembly polishing cleaning Coupling capacitor replacement Clean the card edge connector Bias and offset checks. Check output. Top plate and side plate made of punched aluminum plate. (The interior and exterior were cleaned)
Accessories: power cable
Main specifications: 70W+70W (8Ω) W482 × H15 × D353mm 23.5kg
The disposal price has been reduced! (Not eligible for member discounts) 2022/2/7 sales price 128,000 yen maintained! It makes me feel a bit different from the recent AccuPhase. Since it is possible to switch the value of the damping factor, it is compatible with speakers developed during the heyday of tube amplifiers, and it drives firmly. The appearance is floating on the top plate, etc., and there are rust and scratches. * Because the female thread part of the speaker terminal electrode is thin, it will be damaged if tightened strongly. Serial H6Y276 (Asaina Tomoho)
Maintenance information: 2021.11.2 Maintenance completed (both left and right pre-drive transistors etc. replacement bias and offset adjustment output voice confirmation)
2020.2.27 Maintained (small signal transistor replacement. Replace the NF part electrolytic capacitor Coupling capacitor replacement. AC out replacement Semi-fixed VR exchange ATT disassembly cleaning Sticking fixes. Cleaning other relays and switches. Card edge cleaning Bias and offset check adjustment. Check the output audio. (Interior and exterior cleaning)
Accessories: Instruction manual copy power cord
Main specifications: 70W+70W (8Ω) W482 × H150 × D353mm 23.5kg
The price has been reduced. 2022/1/19 Sales price 64,800 yen*It has been changed to 3P inlet specification. 2-way specification with 500Hz/2way board! Channel divider for 2way/3way in AccuPhase You can change the crossover by replacing the board. It is one of the few channel dividers that allows you to enjoy multisystem while leaving an analog feel (Fujisawa Yukishi)
Maintenance information: 2022.1.19 operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: 2way/3way divider frequency fixed type W445 × H109 × D373mm 9.1kg
Digital cable 1.0m RCA terminal to BNC terminal waveform shaping circuit is stored, which reduces jitter and dramatically improves signal transmission. The appearance has a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.15 Confirmed
Accessories: Dedicated power adapter
Main specifications: Input impedance 47kΩ Output impedance 75Ω
Unspecified headshell. It has a slim shape and seems to be easy to use. There are small scratches and dirt on the appearance (Tomoho Asaine)
Maintenance Information: 2022.5.9 Confirmed
Accessories: None
Main specifications: Own weight 8g (actual measurement)
The price has been reduced! 2022/5/10 sales price 59,800 yen* It is cheap because the saran net is out of stock. The impression is that the low frequency extrusion is stronger than the previous model, while keeping the clear, delicate, and soft high-quality sound intact. It is an easy-to-use model that also selects genres. The appearance has a feeling of use such as small scratches and dullness. Serial 1131-0011669 1131-0011700 (Tomoho Asaine)
Maintenance Information: 2022.5.10 Operation confirmed (good sweep test)
Accessories: Jumper cable (general purpose)
Main specifications: 2-way bookshelf type playback frequency range 45Hz to 50kHz efficiency 87dB impedance 8Ω (minimum 4Ω) crossover 4kHz W190 × H345 × D324mm 6.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/4/8 sales price 89,800 yen only for one bottle. A full-fledged three-way in-wall system that can rightfully claim the ultimate high-end status. It is very versatile and offers a universal solution for those who want the best. Whether the application is traditional two-channel audio or multi-channel home cinema, it handles all roles very easily and is powerful enough even in large rooms. Some painted baldness can be seen on the exterior. (Nobuyuki Takahashi)
Maintenance information: 2022.4.8 operation confirmed
Accessories: Saran net
Key Specifications: Recommended Amplifier Power 20-200W Impedance 8Ω Weight 10kg Sensitivity 90dB Frequency Range -6dB @28Hzおよび50kHz Size W270 × H840 × D98mm (actual measurement) weight 10kg
The price has been reduced! 2022/4/8 selling price 49,800 yen In-wall adjustable dipole/monopole surround speaker. You can choose the type of operation that best suits the state of the listening room, the size of the audience, and the type of program you want to play. The exterior is generally clean. Serial 0000105 0000106 (Asaine Tomoho)
Maintenance information: 2022.4.8 operation confirmed
Accessories: Saran net original box
Main specifications: Dimensions Height 285mm x Width 373mm x Depth, 89.5mm from the surface of the wall 70.5mm from the surface of the wall behind Protrusion weight 3.9kg
The price has been reduced! 2022/4/8 Sales price 34,800 yen A recessed speaker with a powerful neodymium magnet 1-inch metal dome tweeter and a 6.5-inch Kevlar cone woofer. The tweeter housing pivot allows you to adjust the directivity of the treble range. The exterior has deterioration of the mounting part urethane, but the unit is clean without noticeable scratches. Serial 0076981 0076982 (Nobuyuki Takahashi)
Maintenance Information: 2022.4.7 Operation confirmed (good sweep)
Accessories: original box
Main specifications: Coaxial 2-way 2-speaker ceiling mounted speaker use unit 165mm woven Kevlar cone woofer, 25mm semi-dome tweeter frequency response 50Hz to 20kHz (±3dB) Output Sound Pressure Level 89dB (2.83V/1m) Nominal Impedance 8Ω Crossover Frequency 3.5kH External Dimensions (Diameter) 232mm Mounting Dimensions (Diameter) 206mm × 95mm 1.8kg Minimum required depth 95mm
The price has been reduced! 2022/2/5 selling price 2,000 yen* Only one bottle. Speaker stand compatible with BOSE's various surround speakers Compatible with 3, 2, 1 series, AMS series, AM series, FreeStyle, LS series. The appearance has a feeling of use such as dullness. (Morning Tomoho)
Accessories: none
Main specifications: W177 × H968 × D254mm 3.1kg
The price has been reduced! 2022/4/24 sales price 13,800 yen*Currently sold goods. A standard 101MM for small speakers. The tone, which is summarized in one small full-range shot, makes all kinds of popular music sound cheerfully. There is quite a feeling of use. Serial 807919 807020 (Nobuyuki Takahashi)
Maintenance Information: 2022.4.24 Operation confirmed (good sweep)
Accessories: Saran net
Main specifications: 1 way, 1 speaker impedance 6Ω, maximum input 150W, output sound pressure level 86db, W232 × H154 × D172 mm, 2kg
A modified 3D speaker system consisting of a small cube-type speaker 501X stacked on each side and a woofer called a shadow bass box. A system like the current surround that can express a sense of expansion and scale by freely changing the direction of the four satellite cubes. The appearance has a feeling of aging such as tears, small scratches, and dullness of the saran net. Serial 7091726 (Nobuyuki Takahashi)
Maintenance Information: 2022.5.16 Operation confirmed (good sweep)
Accessories: Saran net instruction manual connection cable
Main specifications: Impedance 4Ω Frequency characteristic 18Hz to 20kHz crossover 150Hz unit 5.7cm full range × 2 <キューブスピーカー> size W91 × H91 × D117mm ( 1 unit) Weight 1.1 kg (2 units) Unit 16.5cm Woofer x 2 Size W510 × H320 × D180mm Weight 9kg
Canare's electromagnetic shielded microphone cable Phone plug on one side The noise level is reduced to 1/10 compared to general-purpose 2-core shielded wires, and the design emphasizes sound quality and noise suppression. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Maintenance Information: 2022.5.16 Confirmation
Accessories: None
The disposal price has been reduced! (Member discounts are not applicable) 2021/6/11 sales price 79,800 yen Although maintenance has been completed, there are times when there are times when Hizumi appears in the VOL of HI PASS Hz CH 1, but this is the current situation It's. Crown's 2-way adjustable channel divider Since all filters can be continuously adjusted from 20Hz to 20kHz, the optimal crossover frequency can be set while producing sound from the speakers. It can be used as a 2-way divider when using stereo, and as a 3-way divider when using mono. There is a feeling of use. Serial 5435 (Takasaki Atsushi)
Maintenance information: 2021.6.11 maintenance completed (each SW, VOL cleaning, left and right level difference ±1dB → VOL itself error (please adjust with the input level VOL on the rear panel) HI PASS Hz CH 1 VOL Gari contact failure, there are times when there are times when there is a noise (VOL not available, not available) It is impossible to respond in case of failure in the future)
Accessories: English manuscripts, 6 phone jacks
Main specifications: Frequency characteristics 20Hz to 20kHz ±0.1dB (flat position, rated output) Filter 18dB/oct (high pass and low pass are separated) SN ratio 113dB (20Hz to 20kHz Impedance unbalance: 0 to 15.5 dB 10 kΩ or 1 mΩ balance 20 kΩ power consumption 2W Dimensions W483 × H90 × D133mm Weight 2.7kg
The price has been reduced! 2021/12/30 Sales price 89,800 yen Manufacturer maintained. It is inexpensive because there are many scratches. A mid-high range tone with high musicality in the mid and low frequencies with a strong sense of energy that bounces moist. It is the leading candidate for domestic CD players that combine with tube amplifiers from Tannoy from the 70s and Lux of the same age. The thick analog sound has an appeal that current models do not have. There are a lot of scratches and scratches, including the front upper edge. One rubber bush inside the tray is missing (see photo) (Fujisawa Yukishi)
Maintenance information: 2021.12.30 Maintenance completed (Since it is a 1990 model, it cannot be completely repaired due to parts reasons. Limited repairs are carried out only for currently repairable parts. Belt/damper replacement match, mechanical disassembly adjustment, DIG-OUT specification change, and long-time operation test using various discs have been performed. (Optical PU has deterioration corresponding to the model year. We have not confirmed any serious malfunction symptoms in our environment, but we cannot repair it if a defect symptom caused by optical PU occurs))
Accessories: remote control, copy of instruction manual
Main specifications: 8x oversampling digital filter/GIC tertiary analog filter D/A conversion method: Real 20bit lambda super linear converter W480 × H146 × D390mm 22kg
MAINTENANCE! Comes with cartridge (SHURE M44G) Once set up, it is a full-auto player that allows you to enjoy analog sound with easy operation. With repeat function, you can enjoy the sound quality of the record without any hassle. The ability to switch the size of the board allows automatic start of both 12 and 7 inch boards. The appearance is kusumi and small scratches on the whole. Serial 2624309 (Asaichi method)
Maintenance Information: 2021.8.16 Maintained (The arm position sensor was misaligned and unable to detect the armrest position, the motor continued to turn and operate SW was not working. The turntable was interfering with the cabinet due to damage to the turntable motor mounting part. Arm position sensor reconditioning motor mounting unit cabinet repair, degraded electrolytic capacitor replacement Substrate resoldering was carried out Turntable rotation speed check Arm operation Needle pressure check Appearance cleaning sound out test Other operation confirmation) 2020.11.6 Maintenance (Arm position detection sensor ( CDS) Replacement Substrate Re-Solder Arm Bearing Cleaning Oil Lubricating Motor Shaft Oil Lubrication Operation SWW Needle Pressure Adjustment VR Q Damping Adjustment VR Disassembly Cleaning Semi-Fixed VR Phono Cable Replacement (Arm servo part adjustment, housing cleaning, automatic operation, check for each function operation, sound out check)
Accessories: Manual copy cartridge (SHURE M44G)
Main Specifications: Direct Drive Speed 33 1/3rpm 45rpm No Pitch Control Compatible Cartridge Self Weight 4-9g Dimensions W434 x H145 x D410mm Weight 7.5kg
The price has been reduced! 2022/5/13 sales price 12,000 yen*It is cheap because the remote control is out of stock. DENON's long-selling 390 series 4th generation premain amplifier. Recommended for desktops and those with size restrictions. A classic model that is small but thick in the middle range, and has a stable sound. The appearance has a feeling of use such as dullness, small scratches, paint peeling, etc. Also, there are some gulls in the SOURCE DIRECT switch and the LOUDNESS switch. Serial 2024557464 (Nobuyuki Takahashi)
Maintenance Information: 2022.5.12 Operation confirmed
Accessories: copy of instruction manual
Main specifications: 50W+50W (8Ω) PHONO (MM) W434 × H121 × D338mm 7.0kg
A classic Denon shell. It is also a genuine DA-305 shell. There is also room around the shell lead wire, so you can try various things. The appearance has a feeling of use such as dullness over time. (Hiroki Aso)
Maintenance Information: 2022.5.8 Confirmed
Accessories: None
Main specifications: Aluminum press processing dead weight 8.5g
Dedicated transformer optimized for DL-103. Set the transformer by making the body completely independent of the thick solid carved body, and you can enjoy a beautiful sound with a sense of transparency in combination with direct wiring from the input terminal to the transformer body. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Maintenance Information: 2022.5.13 Operation confirmed
Accessories: None
Main specifications: MC transformer boost ratio 1:10 Compatible impedance 3 to 40 Ω Dimensions W135 × H52 × D102 mm dead weight 1.3 kg
A classic Denon shell. It is made of aluminum alloy and has a reasonable sound and a simple and easy-to-use design. The DL-103 is a royal road combination. The appearance has a feeling of use such as dullness. (Morning Tomoho)
Maintenance information: 2022.3.6 continuity confirmed
Accessories: None
Main specifications: Aluminum alloy impact molding+viscoelastic material gold-plated contacts Adopt dead weight 8.4g
The price has been reduced! 2021/12/6 selling price 19,800 yen* There is no problem with the operation, but it is cheap, so it will be passed on as it is. DSD compatible network audio player. Equipped with WIFI, the D/A converter supports DSD5.6MHz, 192kHz/32bit, which is the same as the one used in the Super Audio CD player. It is also compatible with AirPlay and Internet Radio, making it one with high cost performance. The appearance has a feeling of use such as small scratches. Serial 5043501401 (Asasachi method)
Maintenance information: 2021.12.6 operation confirmed
Accessories: Instruction manual remote control power cable
Main Specifications: DSD (2.8MHz/5.6MHz) AIFF (192KHz/24bit) AIFF, WAV, FLAC (192KHz/24bit) Apple Lossless (96KHz/ 24bit) Wireless LAN standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n compliant W434 × H73 × D297mm 2.9kg
The disposal price has been reduced! (Not eligible for member discounts) 2021/11/16 sales price 298,000 yen Maintenance completed! A famous speaker representing Japan born in joint development with NHK. Since it was developed in 1957, it has been widely used as a reference standard not only for domestic broadcasters but also for overseas broadcasters and sound manufacturers. Since it is a monitor speaker, it has a tone that does not have a habit, and the characteristics of the amplifier and player to be set stand out exactly. The state of the exterior is finished neatly by maintenance. Serial 93291 93297 (Asaine Tomoho)
Maintenance Information: 2021.11.16 Maintained (exterior polishing/full painting
Exterior tape marks removal, chipping, and hole repair Hakama paint sliding tack installation, polishing each part, terminal cleaning, additional tightening. Perform frequency characteristic measurement check (~ 42 kHz) and continue to use the original capacitor for good results Input/output waveform and balance confirmation Dedicated cable creation (BTS terminal 4PIN in the previous period) Conduction and short circuit (Check saran net replacement)
(Saran plate deformation correction/painting (correction traces remain) sound output check)
Tweeter maintenance (cap removal cleaning)
Terminal mounting processing/disconnection repair/reinforcement
(Unit detachment)
Accessories: Dedicated speaker cable
Main specifications: 2 way 2 speaker bass reflex system floor type input impedance 8 Ω sound pressure level 96 dB dimensions W650 × H880 × D445 mm weight 45 kg/book
The disposal price has been reduced! (Members are not eligible for discount) 2020/6/22 sales price 8,000 yen* Current sales item. The active controller of the electrobois. This is a 1U size speaker crossover system. I see a feeling of use, dullness, small scratches scattered. Serial 94285038 (Takasaki Atsushi)
Maintenance info:2020.6.22 Operation confirmed
Accessories: power cord
Main specifications: PSE standard product Rated voltage 100V/125V Rated frequency 50Hz/60Hz W483×H45×D230mm 3.7kg
The price has been reduced! 2022/4/19 selling price 99,800 yen Packed with D-3 technology, there is still a reputation for clicked sound quality without fluctuations. The sharpness and edgy effect are excellent, and the fusion sounds exhilarating. Equipped with a digital volume, it is possible to connect directly to the power amplifier even if the balance is connected. With a wide range of digital inputs BNC, AES_EBU, TOS, ST, it is old, but word sync is also supported. You can also enjoy sound changes with the digital filter selector switch on the front. The appearance has a feeling of use over time, such as dullness and scratches scattered. Serial 20016 (Hiroki Aso)
Maintenance information: 2022.4.19 operation confirmed
Accessories: Instruction manual, power cord, insulator, spike, *Remote control missing
Main specifications: D/A converter 32, 44.1, 48 kHz compatible effective number of bits 20 bit input BNC (coaxial) × 3 · XLR (balance) × 1 · TOS (optical) × 3 · ST (optical) × 1 output Digital output (BNC/coaxial), analog output (RCA/XLR) S/N ratio 115 dB or more (analog output) gain control -42 dB to +6 dB WordSync mode compatible dimensions W465 × H140 × D352mm Weight 15kg
8cm full range unit The slightly warm sound that responds well and does not make you tired of listening is attractive. It's reasonably priced, so it's recommended for users who make their own. The appearance is burnt on corn paper, and there is a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.14 Operation confirmed (good sweep test)
Accessories: Original box instruction manual mounting screws
Main specifications: 8Ω 88db Minimum resonance frequency 140Hz Playback frequency band FO to 30kHz Maximum input 7W 0.36kg
The price has been reduced! 2022/5/14 selling price 2,200 yen FE83E AV compatible model. Adopts a high-performance magnetic circuit, so it is compact and can be used anywhere. An 8cm full-range unit with a creepy and clear sound. The appearance of the cone paper has a feeling of use such as stains, burns, and dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.14 Operation confirmed (good sweep test)
Accessories: Original box instruction manual mounting screws
Main specifications: Frequency characteristics FO to 30kHz 8Ω (actual measurement 8/8Ω) Maximum input 10W External drilling dimensions φ72mm Total weight 288g
8cm full range unit The slightly warm sound that responds well and does not make you tired of listening is attractive. It's reasonably priced, so it's recommended for users who make their own. The appearance is burnt on corn paper, and there is a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.14 Operation confirmed (good sweep test)
Accessories: Original box instruction manual mounting screws
Main specifications: 8Ω 88db Minimum resonance frequency 140Hz Playback frequency band FO to 30kHz Maximum input 7W 0.36kg
Popular fidelity-research headshell The head shell has a simple design and goes well with a light needle pressure tone arm. The appearance has a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.6 Confirmation
Accessories: None
Main specifications: Aluminum press processing dead weight 7.6g
Popular fidelity-research headshell The head shell has a simple design and goes well with a light needle pressure tone arm. The appearance has a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.7 Confirmation
Accessories: None
Main specifications: Aluminum press processing dead weight 7.6g
* Currently sold goods. MC step-up transformer of FR using a toroidal core. Produces a natural sound that makes it easy to understand the characteristics of the cartridge. There is also a bypass position in addition to switching impedance of 10 and 30 ohms, so it can accommodate a variety of cartridges without taking up space. The state of appearance has small scratches and dullness over time. (Yuki Yamato)
Maintenance information: 2021.12.21 operation confirmed
Accessories: none
Main specifications: Impedance 10Ω/30Ω/PASS Playback frequency band 20Hz to 30kHz W64 × H64 × D105 mm Approx. 455g
Popular fidelity-research headshell The head shell has a simple design and goes well with a light needle pressure tone arm. The appearance has a feeling of use such as dullness. (Tomoho Asaine)
Maintenance Information: 2022.5.6 Confirmation
Accessories: None
Main specifications: Aluminum press processing dead weight 7.6g
RCA-BNC conversion cable 1.2m There is a notation on the sheath as FUJIKURA 5C2V, but the details are unknown. The appearance has a feeling of use such as rust and dullness on the plug, and dullness in the sheath. (Nobuyuki Takahashi)
Maintenance Information: 2022.5.13 Confirmation
Accessories: None
Grantz head shell The head shell has a simple design and is lightweight, so it is easy to handle. The appearance has a feeling of use, such as slight dullness. (Hiroki Aso)
Maintenance Information: 2022.5.8 Confirmed
Accessories: None
Main specifications: dead weight 10g (actual measurement)
* It is cheap because the phono cable is out of stock. Grace wood framed tone arm The material is made of tender teak wood, and it is an arm with high processing accuracy like Grace. The support method is an oil dump of one-point support, and the head shell part is a replacement method with a dedicated shell. For cartridges with relatively light needle pressure. The exterior has marks of the armrest on the wooden arm part, and the metal part has rust and dullness. Serial 1516 (Hiroki Aso)
Maintenance Information: 2022.5.16 Confirmation
Accessories: Dedicated shell x 2 mounting screws
Main specifications: static balance, one point support, oil dump type, effective length 237 mm, compatible cartridge 4 to 13 g, needle pressure range 0 to 3 g
The price has been reduced! 2022/5/15 sales price 15,000 yen with glass door (AP-25G)! Hamilex 3-tier rack Since it is very solid, it also supports heavyweight amplifiers well. The appearance has a feeling of use over time, such as scratches and dullness, and lack of top plate cap. (Tomoho Asaine)
Accessories: None
Main specifications: W625 × D560 × H500mm Weight 40 Kg
The price has been reduced! 2022/5/15 sales price 15,000 yen with glass door (AP-25G)! Hamilex 3-tier rack Since it is very solid, it also supports heavyweight amplifiers well. The appearance has a feeling of use over time, such as scratches and dullness, and lack of top plate cap. (Tomoho Asaine)
Accessories: None
Main specifications: W625 × D560 × H500mm Weight 40 Kg
※It is cheap because it is in poor condition. Comes with a glass door (AP-28G) Hamilex heavyweight audio rack Compared to the company's same class in recent years, the texture of the veneer is beautiful, and the corners of the shelves are also made up, making the sense of luxury superior. With a firm construction, you can expect a sound that works well. The appearance has a feeling of use over time, such as scratches and dullness, damage to the top plate cap, and peeling of the veneer. (Tomoho Asaine)
Accessories: None
Main specifications: static load capacity/100 kg or less on the top plate, 50 kg or less each on the shelf board, 100 kg or less on the bottom plate, total load capacity 250 kg or less W625 × H1150 × D570 mm Weight about 60 kg
※It is cheap because it is in poor condition. Comes with a glass door (AP-28G) Hamilex heavyweight audio rack Compared to the company's same class in recent years, the texture of the veneer is beautiful, and the corners of the shelves are also made up, making the sense of luxury superior. With a firm construction, you can expect a sound that works well. The appearance has a feeling of use over time, such as scratches and dullness, and lack of top plate cap. Serial MK9602 (Asaine Tomoho)
Accessories: None
Main specifications: static load capacity/100 kg or less on the top plate, 50 kg or less each on the shelf board, 100 kg or less on the bottom plate, total load capacity 250 kg or less W625 × H1150 × D570 mm Weight about 60 kg
The price has been reduced! 2022/3/17 sales price 79,800 yen maintained! A representative of JBL's 1-inch driver unit. Since the playback band is wide, you can freely change the network cross and enjoy it. The toughness, sound pressure feeling, and fulfilling mid and high tones that are uncommon to some input are attractive. The appearance has a feeling of use such as aging scratches, dullness, etc. Serial 40215 44698 (Hiroki Aso)
Maintenance Information: 2022.3.17 Maintained (Vibration plate mounting adjustment (The vibrating plate has D16R421.) Parts Replacement DCR (40215/6.5ohm Vibration Plate No Scratch) DCR (44698/6.5ohm No Vibration Plate Scratch) Sound Out Checked)
Accessories: None
Main specifications: 1 inch driver 500-20,000 Hz 8Ω W145 × D97 mm 5.1 kg/book
The price has been reduced! 2022/2/22 selling price 16,800 yen* It is cheap because it is in poor condition. This is a recorn kit for the 46cm cone type woofer unit of the E series developed for playing musical instruments such as electronic organs and bass playback. There is dirt, deterioration, and hardening of gasket rubber associated with long-term storage. Serial J562-07209 (Asaine Tomoho)
Accessory: gasket
Main specifications: Diameter 440mm (actual measurement)
It has been maintained. With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to your purpose, such as 2-way or 3-way. The appearance has a feeling of use such as dullness. Serial 17288 18098 (Asaine Tomoho)
Maintenance Information: 2022.5.14 Maintained (Housing Round Terminal Rust Removal Pickling Cleaning Insulation Bushing & Mounting Screw Replacement ATT Brand New Replacement Frequency Characteristics Measurement Check (~ Approx. 42 kHz) and continue to use the original capacitor for good results input/output waveform and balance check sound output check)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Refresh with internal and external maintenance! A popular model with a vivid blue baffle that catches the eye. A titanium dome is used for the tweeter, and the sharpness of the high range is outstanding. The sound of rock and jazz-like sounds is pleasant, and it is a crisp sound with a sharp sound while the bass comes out well. The state of the exterior is finished neatly by maintenance. Serial J370-010086 J371-0100134 (Yuki Yamato)
Maintenance Information: 2022.5.14 Operation confirmed
2022.4.29 Maintained (exterior polishing/oil finishing rear baffle hole filling repair/painting, plate repair saran net broken repair/painting, net replacement woofer crack repair/cone paper painting ・Midframe polishing tweeter grille dent correction ATT cleaning unit detachment)
Accessories: Saran net
Main specifications: 3-way, 3-speaker, bass reflex system Frequency characteristic 45Hz to 22kHz crossover 2kHz/5kHz Sound pressure level 93dB Impedance 6Ω Dimensions W362 × H597 × D299mm weight 20kg/book