Maintained! A very rare BL-101 gunmetal version BL-101G+SAEC WE-407/23 golden combination. I think it would be an exaggeration to say that it is one of the pinnacle of domestic production systems. You can enjoy sharp sounds that are clearly in focus. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 02040861 (Hiroki Aso)
Maintenance information: 2024.3.28 Maintained (deteriorated capacitors, semi-fixed resistors, replacement, rotation switching, repolishing, rotation speed refinement, VR, brand new replacement, motor disassembly, bearing replacement after lubrication, exterior cleaning, insulator, rubber curing, creating a replacement product for rubber hardening; installation cabinet cleaning, main body assembly circuit adjustment, needle pressure adjustment, each rotation speed confirmation; sound output test; comprehensive operation confirmation)
Accessories: 2 platter removal screws
Main specifications: double knife edge static balance type, total length: 311 mm, effective length: 233 m, overhang, 12 mm, automatic needle pressure adjustment range: 0 to 4 g, mounting hole diameter: 30 mm (arm shaft diameter: 27 cm), maximum plate thickness: 35 mm, external dimensions: W532xH215xD420 mm, weight approx. 23 kg
First arrival! This speaker system is the highest-end model in the reference series announced on the 25th anniversary of KEF. The expansive spatial expression and fresh, glossy sound are attractive. It seems that the previous owner replaced the woofer edge with chamois leather, so durability is also safe. *The equalizer KUBE is included, but operation has not been confirmed due to 220V specifications. Even without an equalizer, it can be used as a normal speaker without any problems. Jumper cables are replacements (Oikawa Tetsuji)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: dedicated equalizer KUBE 107/2
Main specifications: 3 way 4 speakers 4 ohms 90 dB W330 x H1170 x D475 mm 45.8 kg
Classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: no lead wire
Main specifications: aluminum stamping dead weight 6.8 g
Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. The exterior has oxidation, rust, and line damage (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Maintained (Electrolytic capacitors and AC cords replaced each due to deterioration. Rubber foot replacement. Solder correction. Vacuum tube pin cleaning. Remove foreign objects. Wiring restyling. Bias check. I checked the output sound. (Although it is AC117V specification, it can operate at AC100V.)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Maintained! 100V specification Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has a feeling of use such as dullness and small scratches. Serial EB8504 (Jun Tamai)
Maintenance Information: 2024.3.28 Maintained (Balance Loudness Equalizer Gari Cleaning Can't Be Removed) 2024.2.29 Maintained (Each SW Vol Cleaning Glass Panel Peeling Correction Push Button Disassembly Cleaning Lamp Deterioration Replacement Fuse Replacement Compander Pot Defect Monitor Amplifier RCH Noise → FET Defective Replacement Transistor Replacement REC Relay failure → replacement)
Accessories: copy of the manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, needle cover, mounting screw, brush
Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
SPU-GE reprint model, popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Serial 834917 (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: stylus cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Lots of accessories! The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments, etc. There is a feeling of use on the exterior, such as dullness and scratches on the body (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, lead wire, simple needle pressure gauge, brush, needle cover, mounting screws
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
Maintained by Electri, including replacing the windshield panel with a new one! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 manufacturer maintained (windshield panel replacement. Replace the Oring to fix the switch bezel. Due to a problem with the operational amplifier, characteristics were poor, and the voltage was unstable, so a lot of pop noise was generated when the front volume display was off. IC exchange. Capacitors were replaced at various other locations. Replaced due to filter capacitor deterioration. Other relays, transistors, etc. have been replaced just in case, but please be aware that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement. There is a difference in meter runout when the volume is low, but when the output is raised about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments have been made so that they fit at a position of approximately half a meter. Same confirmation and other inspections.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
※The remote control is being ordered. It is a CD player with a nostalgic design typical of Yamaha of yesteryear. The sound is clear and delicate, and the sound field feeling in SACD playback is worth listening to. There is a sense of transparency, and you can enjoy sound with a wide range (Daiki Goto)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: Playback media SACD/CD/CD/RW (MP3/WMA playable) output terminal [analog] RCA/XLR [digital] optical/coaxial W435 x H137 x D440 mm 15 kg
Genuine Time Road Master clock generator. A rare clock with natural orientation, excellent sound image localization, and excellent reverberation expression. It is a model that specializes in expressiveness rather than performance. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.3.28 power check (operation has not been checked because there is no clock equipment)
Accessories: power cable, instruction manual
Main specifications: clock frequency 32/44.1/48/88.2/96kHz, 6 clock out systems, high-precision crystal oscillator, shipment accuracy 0.1 ppm, W430 × H52 × D390 mm, 6.8 kg
※One felt foot is missing, so one side is tilted. There are a lot of scratches. When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced (Oikawa Tetsuji)
Accessories: none
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
A passive controller with minimal functionality packed tightly and compactly. You can level, mute, and monossum stereo sources. Serial S211100256C9RGU (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input XLR/standard phone jack complex 1 system, mini phone jack 1 system output XLR/standard phone jack complex 1 system, 1 mini phone jack system W145 x H69 x D85 mm 0.4 kg
RCA cable 5.0 m pair TEAC RCA cable with unknown details. The cable has a slim plug and is easy to use even for vintage products. There is some stickiness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with 2.3 m pairs of untreated ends. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
Speaker cable 2.0m pair This is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
Speaker cable is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.5m pair end. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/20 sales price 15,000 yen. Speaker stand made for Pioneer S-HE10. The slightly taller, exquisite size that seems to fit other companies' large bookshelves is attractive. The pillars are also well-made. There is a lot of feeling of use such as small scratches on the whole, felt rolls on the installation surface, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: installation surface W379 x D379.5 mm External dimensions W425 x H320 x D435 mm 13.4 kg
The price has been drastically reduced! 2024/3/22 sales price 248,000 yen The initial main weight split type has been revived with genuine maintenance by Rizaye! It is a popular model with a full range of cartridges that can be used. In addition to the glossy, smooth tone due to the metal knife edge, it is a famous machine that boasts deep chiseled sound quality. An earth cable is not attached, but it is an original specification that diverts the ground with Rch-. The main weight is a large type
Maintenance information: 2023.5.17 maintenance (main unit disassembly check and cleaning, bed plate grommets x 4 replacement, inspection and adjustment of each part, and operation check)
Accessories: instruction manual (copy), dedicated cable
Main specifications: statically balanced needle pressure 0 to 5 g, cartridge weight 1.5 to 26 g
The price has been drastically reduced. 2024/3/15 sales price 398,000 yen Maintained! It is a vacuum tube amplifier that is the younger brother of the Meiki MC275. The moderate stickiness and rich sound are good hues unique to vintage McKinn. It is less rough than the MC275, and you can feel the high level of relaxed musicality. The exterior has oxidation and rust, and there are dents and scratches on the transformer (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (choke transformer rewound repair. Vacuum tube 12BH7 deterioration replacement. Block capacitor 35/80/15 μF defective replacement. 150 μF block capacitors made in Japan → replace 2 with CE ones. Replace 4 0.047 μF film capacitors for defects and deterioration. Replace 3 100 μF electrolytic capacitors and other deterioration. 2 1W resistors and 1/2W deterioration replacements Vacuum tube socket and RCA jack caulk repair. *There is a part of the SP terminal missing. (AC cord has been replaced with Hitachi by another company)
Accessories: No accessories
Main specifications: 25W+25W vacuum tube 7591 (output tube), 12BH7, 12AU7, 12AX7 W232 x H178 x D368 mm 15.4 kg
We've reduced the price! 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. Internal all-check, Lch power stage Tr x 3 large leak DC cut C, gain setting C off → replace. (No AC line fuse, installation, operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Comes with original box Genuine fusion coordination. 120W A+D class stereo amplifier Furthermore, it is possible to operate as a 290W mono amplifier with a bridge amplifier. The goal is to achieve a tone unique to vacuum tube amplifiers, and it is designed with a more advanced even-order harmonic circuit. It is in good condition with no conspicuous damage (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 120W (stereo), 290W (bridge) input impedance 47kΩ playback frequency band 10Hz-50kHz W235 x H55 x D276mm (including terminals and legs) 4.8 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been drastically reduced. 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced! 2024/3/10 sales price 20,000 yen*One Bluetooth antenna is damaged, and when the volume is turned, there are times when the volume cannot be adjusted correctly, so it is inexpensive, and is currently sold. Marantz thin AV receiver. The exterior is dull overall, and there are places where the LCD is small (Oikawa Tetsuji)
Maintenance information: 2024.3.10 Operation confirmed (sound output OK with HEOS)
Accessories: remote control, power cable
Main specifications: front 50W+50W (8Ω) 70W+70W (6Ω) PCM192 kHz, compatible up to DSD 5.6 MHz, W440 x H105 x D376mm 8.3 kg
The price has been reduced! 2024/3/22 sales price 500 yen replacement needle made in Colombia. Since there are no compatible cartridges, it has not been checked (Yamato Yuki)
Maintenance information: 2024.3.22 unchecked
Accessories: original box
Comes with original box and pedestal! Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It is useful for high frequency correction etc. in a well-stretched, tight high frequency range. There are small scratches and dullness on the exterior. (FUJISAWA KOSHI)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: instruction manual, original box, pedestal
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Maintained. This time, it will be sold without a diffraction pad. Wilson's best-selling model excelled in its ability to faithfully convey the sound of the source to the listener. The tremendous sense of speed and the fineness of the sound particles are outstanding, the sound field space is large, and the characteristics of good tone are still very attractive. There are repair marks (Oikawa Tetsuji)
Maintenance Information: 2024.3.26 Maintained (Exterior Cleaning/Touch Repair Diffraction Pad Removal Woofer Maintenance: Edge Replacement, Back Filter Replacement Tweeter Maintenance: Edge Replacement, Magnetic Circuit Gap Cleaning Unit Detached)
Accessories: Spikes, spike receivers ※ WATT height adjustment spikes are only included with No. 4.
Main specifications: 3 way 4 speaker impedance 4 ohms output sound pressure level 92 dB W305 x H1016 x D470 mm 73 kg/book
Comes with original box Genuine fusion coordination. 120W A+D class stereo amplifier Furthermore, it is possible to operate as a 290W mono amplifier with a bridge amplifier. The goal is to achieve a tone unique to vacuum tube amplifiers, and it is designed with a more advanced even-order harmonic circuit. It is in good condition with no conspicuous damage (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 120W (stereo), 290W (bridge) input impedance 47kΩ playback frequency band 10Hz-50kHz W235 x H55 x D276mm (including terminals and legs) 4.8 kg
Denon's mid-range model. You can enjoy all genres with good modern response and unobtrusive sound quality. Since it is relatively thin, this model is recommended for those who are concerned about space. Phono is compatible with MM/MC. The exterior has small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, power cable,
Main specifications: rated output 70W+70W (8Ω) dimensions W434 x H134 x D410 mm weight 15.5 kg
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital RCA cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Digital BNC cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An entry-class MC cartridge from the Technica 80s. It is also suitable for getting started with MC cartridges. The cantilever is slightly to the left (Takasaki Atsushi)
Maintenance information: 2024.3.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.5 mV 10 ohm 20 Hz to 40 kHz needle pressure 1.4 g to 2.0 g dead weight 4.2 g