The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The FOSTEX 20cm double woofer enclosure D-70 is a plywood cutting service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in a stereo magazine at the time by Musico-no-Tomosha, and this is not a genuine assembly kit. There is no difference in dimensions or materials. Wiring, SP terminals, detailed instructions, etc. are not included. If you understand it, if you are a self-made person, how about DIY this summer!? * The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications: Backload enclosure for 20cm double woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight about 93.6 kg
Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
The price has been reduced! 2023/10/7 sales price 20,000 yen This is a self-made MC boost transformer. According to the specifications, the boost ratio seems to be 1:10. Use high output cartridges such as DL-103! (FUJISAWA Yukishi)
Maintenance information: 2023.10.7 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W110 x H45 x D145 mm (actual measurement)
Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
A popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. There are scratches and small scratches on the exterior. Serial 10090026 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
TRIO N-39 compatible needle. This is a replacement needle for TRIO V-39. Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
This is a replacement needle compatible with Hitachi MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced. 2024/4/6 sales price 50,000 yen The depth, positioning, reverberation, and sense of distance are improved compared to the original top plate using high-purity oxygen-free copper (OFC4N 99.99%) for P-0s ※ The top plate screws require longer screws, but they are not included. Please be careful (Daiki Goto)
Maintenance information: ※ Longer top plate screws are required, but they are not included. Since preparations are not possible, the person who purchased it will have them ready. Please be careful.
Accessories: none
Main specifications: thickness 12 mm, measured 13.3 kg
Sold in 1 bottle 12AX7 compatible ball made in Germany and determined from the German structure and date code to be ECC83 made in Germany Code: I62 Ki3C? Measured value 48 (rejected value 32) *The measured value represents the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Pair tube, PX4 equivalent tube, direct thermal triode, made in England, measured value 54/52 (rejection value 39) with white box (there is writing on the box) *The pair was judged based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
The price has been reduced! 2024/4/11 selling price 3,000 yen headshell with unknown details. The body shape and finger position are unusual shapes that are different from normal. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
Unspecified CD storage case. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W305 x H290 x D172 mm 2.3 kg (actual measurement)
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
1.8 m PSE standard power cable, 4 types of hybrid original conductor+3-core structure, this is a long-selling cable that reproduces a sense of expanding sound field, medium to high range with good coverage, and a wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: original box
The price has been reduced! 2024/4/9 sales price 69,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 x H200 x D350 mm 3.30 kg
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
A wide FM/AM tuner that uses a dedicated large, high-rigidity chassis and piano-black-finished sidewoods. The aluminum tuning dial, which allows you to enjoy an analog-like sense of operation, makes you feel nostalgic, and FM complementary broadcasts are also perfectly compatible. The reception sensitivity is also good, and it lets you hear thick sound. There are no noticeable scratches on the exterior. Serial Z015995VXR (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: power cord, loop antenna
Main specifications: FM/AM tuner reception frequency: 76.0 to 94.9 MHz (compatible with FM complementary broadcasting) external dimensions W435 x H94 x D450 mm mass 5.8 kg
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Digital cable, 1.5m, BNC terminal, silver-clad OCC high-purity copper conductor, has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle (Ryo Mizusaki)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: none
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
Sold per bottle, general purpose amplifier tube, top mark, JAN, made in America, measured value 38 (rejected value 28), with replacement box (the lid of the box is missing) *The measured values are values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The price has been drastically reduced. 2024/4/14 sales price 248,000 yen ※ It is cheap because it is in poor condition such as line damage or paint peeling. Maintained! American high-end D/A converter, Vimac VIMAK DS-1800MK2. The sound quality sets it apart from today's high-resolution oriented high-end DA converters, and the sound is rich and deeply engraved. The tone that makes you listen closely to music matches well with vintage systems. The exterior has chipped corners, scratch marks, scratch marks, paint peeling, etc. (Shota Sasaki)
Maintenance information: 2024.4.13 Maintained (The jumper line connection was fixed due to analog circuit pattern corrosion disconnection. I visually checked the other patterns. (I checked my runs.)
Accessories: power cable
Main specifications: 32/44.1/48Hz automatic switching W445 x H130 x D475 mm 16.3 kg
The price has been reduced! 2024/4/9 sales price 6,500 yen MM type cartridge developed by inheriting the technology of the X-1 series. It inherits technology from the X-1 series, such as beryllium cantilevers, laminated cores, and samarium-cobalt magnets. Furthermore, the degree of perfection has been enhanced through theoretical analysis and strict hearings using computers. The exterior has a feeling of use such as dullness, scratches, and peeling of the front plate. There is a slight bend in the stylus (Jun Tamai)
Maintenance information: 2024.4.9 sound output confirmed
Accessories: none
Main specifications: mm type cartridge, suitable needle pressure 1.5 g to 2.0 g, dead weight 5.5 g
The price has been reduced. 2024/3/23 sales price 20,000 yen*Currently sold. Both center caps have dents, and the dowel rubber on one side of the saran net is missing, etc., so the condition is poor, so it is inexpensive. Victor's 3-weight dollboy speaker It is a masterpiece that combines a glossy sound that spans the entire area with a clear mid-range. It is characterized by a clear sense of transparency in mid and high tones, and shows its true value with female vocals, etc. In addition to the appearance described above, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: instruction manual, saran net, jumper
Main specifications: 3-way 4-speaker system bass reflex type (anti-magnetic JEITA) 32 Hz to 80,000 Hz W300 x H1029 x D345 mm (including foot part) 22 kg
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
※Inexpensive because it is in poor condition. A rare SD-45 under the name ULTRACRAFT. It has the same configuration as the same Audiocraft model. As is on the LP, it can also be used as a doughnut board if you turn it over and use it together with the adapter. There is red paint on the logo, paint has fallen all over, and there is a lot of dullness (Murakoshi Yoichi)
Accessories: 45 rotation adapter
Main specifications: brass material, self-weight 500g
Pair tube 6CA7 compatible sphere Russian reprint model measurement value 46/42 (rejection value 30) white box with getter burn ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 6CA7 compatible sphere Russian reprint model measurement value 52/48 (rejection value 30) white box with getter burn ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
※The sound output operation has been confirmed, but there is a slight band gap, and since it is cheap, it will be handed over as is. Trio quadruple varicon-type FM/AM tuner. The high range is moderate, but the fresh, thick sound that is difficult to obtain with a synthesizer tuner is attractive. The exterior has spots, small scratches, and rust spots (Mizusaki Ryo)
Maintenance information: 2015.3.4 manufacturer maintenance (The detection circuit offset has been adjusted. Other adjustments have been made to RF, detection, VCO, separation, meter, etc. (There is a contact problem with the switch and volume, but since parts are not available, the contacts have been cleaned)
Main specifications: W430 x H149 x D376 mm 8 kg
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
※It has a cigarette smell, so it's cheap. High performance headphone amplifier with topping. It is compatible with a variety of headphones, and is an inexpensive yet cost-effective one. The size is also compact, so I recommend it. The exterior is dull. Serial 2101691163 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 3-stage gain setting, built-in NFCA circuit, dynamic range 145 dB, W222 x H45 x D160 mm
The price has been drastically reduced. 2024/4/15 sales price 118,000 yen Maintenance is being carried out in 2020. 60Hz specification. A record player equipped with Ortofon's short arm RS-212 on the TD160. Only the turntable and arm mounts have a floating structure. It is an attractive player with a sharp sound and sound quality typical of Torrens. The springs on the dust cover hinge have deteriorated. There is damage such as scuffs and scratches on the cabinet dust cover. Serial 422455 (Murakoshi Yoichi)
Maintenance information: 2020.10.10 Maintenance completed (arms, arm bases, etc. are cleaned because rubber adhesives adhere to a wide area, etc., removed because the cushion spring is fixed with foreign matter, sub-board rubber adhesive cleaning, motor connection terminals (faston chips) are broken and unstable, arm elevation cannot be disassembled or adjusted, so current status (descent is slightly fast), arm operation, voice check)
Accessories: sub weight, AC adapter
Main specifications: one-step belt drive system, 16-pole synchronous motor, zinc alloy turntable (diameter 30 cm, weight 3.2 kg), W440 x H165 x D350 mm, 11.0 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and bends on the panel. Serial 2172380SCG00375 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and paint bald spots. Serial 2172380UGD01107 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg