I cut the price! 2021/2/8 Selling price 35,000 yen ※ Front panel hinge breakage, overall condition is poor, so it is cheap. Maintened! Primain amplifiers developed by incorporating Yamaha's proprietary technology in order to achieve stable drive capability at all times. The timbre obediently reaches the ear and produces a clear sound. There is also a driving force and it conveys a firm power. Compatibility with female vocals and pops is recommended. Appearance has rubber marks on the top plate, side wood peeling. (Tomoho Asaine)
Maintenance Information: 2021.2.7 Operation Confirmed 2020.3.26 Maintenance (Action: The power switch is a remote control device, so it is not a lock type, just press lightly. Speaker A/B switch and PURE DIRECT are long push switches so they can be pressed. The PHONO MM/MC switch is quite heavy because it pushes the switch located on the rear panel, as it pushes the long shaft. TURNOVERSUBSONIC and MODE switches are micro switches so they have a different feeling again. I painted grease and treated it. Switch and volume burrs are fully treated with contact revival agents every day for a week. Action: Replace defective components in the main amplifier circuit. Output relay contacts failed replacement. Input Selector and RECOUT Selector Disassembly Contact Polishing Input/output pin jack polish (Excuse me but the sidewood peeling has been shrinking vinyl and cannot be repaired.)
Accessories: None
Main Specifications: Power consumption 260W rated 185W +185W (6Ω) W473 × H171 × D448mm 20kg
Disposal price cut! (Member discount is not applicable) 2021/2/14 Selling price 180,000 yen An unusual stainless steel platter has arrived. The details are unknown, but I think it's probably usable for MICRO etc. Appearance has Kusumi and Slight Scratch. (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Diameter 300mm Height 50mm Weight 17.8 kg (Measurement)
I cut the price! 2021/2/14 Selling price 108,000 yen ※ It is inexpensive because of poor condition such as stains. Micoro gunmetal turntable Appearance is dullness, dirt, oxidation, etc. Serial 01100001 (Eiji Tamura)
Accessories: No accessories
Main specifications: diameter 310mm thick 55mm gunmetal 14.7 kg (actual measurement)
Significantly reduced price! 2021/2/14 gun metal turntable with a selling price of 128,000 yen MICRO. Appearance, there are dullness, scratches, dirt, oxidation, etc. Serial 02030110 (Eiji Tamura)
Accessories: No accessories
Main specifications: diameter 310mm thick 55mm gunmetal 14.7 kg (actual measurement)
I cut the price! 2021.2.18 gunmetal turntable with a selling price of 99,800 yen MICRO. The height will be lower than normal type. Appearance is dullness, dirt, oxidation, etc. Serial 02030110 (Eiji Tamura)
Accessories: No accessories
Main specifications: diameter 305mm thick 32mm gunmetal 6.8 kg (actual measurement)
Overhauled! New dust cover also refreshed. Peripheral drive belt drive record player Equipped with a tone arm (straight pipe) of the rare company MA-505MK3. I nod that it has a reputation for being petite but profound construction, stability and sound separation are good. Recommended for those who want to enjoy the sound of micro casually (Sasaki Shota)
Maintenance information: 2021.2.26 Maintenance (Operation SW · Rotation adjustment VR disassembly contact polishing. Arm disassembly cleaning, bearing replacement, lubricating parts. Internal substrate electrolytic capacitors, semi-fixed resistance exchange, re-soldering Replace phono cable RCA plug Motor disassembly brush cleaning and lubricating Turntable shaft disassembly cleaning and lubricating Appearance cleaning, turntable rotation speed check, arm operation/needle pressure check, sound out test. Other operation check.)
Accessories: Copies
Main Specifications: [BL-77] Belt Drive Turntable Diameter 30.6 cm, 3.2kg Speed Fine Adjustment Range ± 3% W496 × H155 × D400mm Approximately 12kg [ma-503mK3] Dynamic Balanced Arm Pipe Replacement Type Total Length 375mm Running Length 237mm Overhang 15mm Needle Pressure Range 0-3g Arm Height Adjustment 42-70mm (Base to Cartridge Mounting Surface) Cartridge's own weight 4-8.5 g
RCA cable 1.0m pair The previous model of 300B MICROTWIN, is slender, easy to use and condense Caldas theory. There is a little feeling of use. (Takasaki Takasaki)
Maintenance Information: 2021.2.26 Conducting Confirmed
Accessories: None
RCA Cable 1.0m Pair Iridium Interconnect Cable with Cardas Audio's proprietary Starquad (4) construction of Golden Ratio conductors. It is the successor model of 300B micro twin. A musical-rich cable that blends a very natural high range in a smooth midrange over a low range with a sense of speed. with certificate (Takasaki Takasaki)
Maintenance Information: 2021.2.26 Conducting Confirmed
Accessories: Certificate
Main specifications: Wire rod 6N grade OFHC (oxygen-free high-grade copper), 24.5 AWG×4, outer diameter 7.7mm
Base for SME long arm (3012/3012R) Compatible with Micro/SX-8000/5000/3000/1500 series Appearance, there are kusumi and dirt. (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Weight approx. 1000g
We cut the price (2021.2.28 selling price 148,000 yen) * You can use a simple remote control, but the large remote control does not reflect the LCD and cannot be used. 7CH multi-channel amplifier with full digital 32-bit S-Master Pro. Equipped with automatic sound field correction function that maximizes the capabilities of the system. Compatible with various formats such as Dolby Pro Logic iX, DTS 96/24, etc. Support multichannel input Although we have done a simple sound out check, the video system and detailed functions are unchecked (Yasuto Koshihama)
Maintenance information: 2021.2.28 Storefront operation confirmed (sound out check, video system unchecked)
Accessories: 2 remote controls, explanations, microphone for sound field correction, power cable (non-genuine)
Main Specifications: Front 200W+200W Center 200W Surround 200W+200W Sound Back 200W+200W (For all impedance 8Ω) H430 × H238 × D480mm 28.5kg for details here https://www.sony.jp/audio/products/TA-DA9100ES/spec.html
Comes with a 3D microphone for measuring (sold separately)! Sound optimizer. With today's best acoustic correction technology, you can easily improve the acoustic characteristics of your room. The unique 3D measurement microphone measures acoustic characteristics, and the internal microprocessor measures and corrects the low-frequency acoustics, group delay, phase, and impulse response of the room. By VNC by LAN connection, you can operate on PC, MAC, iPad, iPhone, Android terminal without the need for specialized software etc. There are small scratches but no conspicuous scratches (Sasaki Shota)
Maintenance Information: 2021.3.2 Operation confirmed
Accessories: Power cable, antenna, sound-collecting microphone, instruction manual
Main specifications: Analog input terminal/XLR × 2, RCA × 2 digital input terminal/AES/EBU × 1, S/PDIF, RCA × 1 analog output terminal/XLR × 2 digital output terminal/AES/EBU× 1, S/PDIF, RCA × 1 W441 × H97 × D418mm Approx. 9.4kg
Top model using 6N copper for the winding of the coil of the classic cartridge DL-103. The high range is improved compared to the original model. It is intended for audio that allows you to enjoy more music. Serial 9386 (Hiroshi Kondo)
Maintenance Information: 2021.3.2 Operation Check
Accessories: None
Main specifications: Round needle tip 16.5 micron output voltage 0.25mV playback frequency 20Hz to 45kHz impedance 14Ω needle pressure 2.5g self weight 8.5g