The price has been drastically reduced. 2024/4/20 sales price 848,000 yen Exterior cleaning and repair completed! This is JBL's standard monitor series. Compared to the 4343 and 4344 up until now, you can enjoy modern JBL sound that is more delicate, has a sense of balance between each band, and has good grain. Fine nuances are coming out in the vocals. There is a repair mark on the top plate (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior cleaning, repair, saran net turning and bonding, 9V battery replacement)
Accessories: instruction manual, saran net, jumper
Main specifications: 4 way 4 speakers, impedance 6 ohms, output sound pressure level 95 dB, W597 x H1080 x D400 mm, 90 kg/1
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The price has been drastically reduced. 2024/4/19 sales price 398,000 yen A full-range speaker that uses a Satsuma Shimadzu 6cm DSS diaphragm. It is intended for low volume playback, so you can enjoy realistic sound that transcends size. The beautiful solid cherry wood enclosure is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: instruction manual, unit protector, cable hook, screws, + screwdriver, cross
Main specifications: 6cm full range 80dB 4Ω input resistance 15W main unit W150 x H260 x D210 mm, stand height 650 mm
The price has been drastically reduced. 2024/4/11 sale price 59,800 yen Aura line exclusive premain amplifier. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There is a slight feeling of use, such as a missing screw in the center of the back, scratches on the top plate, etc., and some lettering disappeared (Murakoshi Yoichi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: power cord, copy of instruction manual
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The price has been drastically reduced. 2024/4/20 sales price 248,000 yen Genuine AC is out of stock. An esoteric isolation transformer. Stress-free 6N copper wire is used as the coil wire. We are pursuing the ultimate clean power supply environment by using the same extra thick 6N copper single wire for internal wiring. In addition to scratches on the exterior and top plate, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmation (power can be turned on)
Accessories: instruction manual
Main specifications: maximum rated power 1,500 W, number of outlets 6 external dimensions W246 x H219 x D422 mm, mass 31 kg
Maintained! John Carl's slim-design “flat preamp” is the first control amplifier equipped with an original module developed in-house. Thorough simplification and a straight, coined tone with carefully selected high quality parts are the model that became the basis for later Mark Levinson preamps. Serial 1306 (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (new power supply made inside the original power supply, Lch gain changeover switch replacement, volume gang error correction, function switch contact cleaning, specification inspection, various operation inspections) 2024.3.3.13 maintenance (various inspections, aging) 2023.10.27 maintenance (RCA terminal replacement, inspection adjustment)
Main specifications: 5 module phono (MM) compatible RCA input/output body size W482 x H60 x D195 mm (actual measurement) 4.2 kg (actual measurement)
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. It's very slightly to the right. Serial 718026 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Black, the highest peak in the 2M series, is now in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information on 2M's highest peak is truly one word (Hiura Katsuji)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: original instruction manual box
Main specifications: output voltage 5 mV frequency characteristics 20 to 31,000 Hz internal resistance 47 ohms suitable needle pressure 1.5 g dead weight 7.2 g
The MM cartridge that comes with the YP-D3 is dual magnetic. The sound quality is flat balanced, but the sound is very energetic, so I recommend it. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 2.2 mV needle pressure 2.0 g dead weight 6 g
The price has been reduced. 2024/4/13 sales price 8,000 yen. Magnesium alloy body headshell Since it has excellent vibration absorption, it maximizes the potential of the cartridge. In addition to the exterior and lead being changed to a single wire, there are slight mounting marks, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Main specifications: Twin lock pins made of magnesium alloy, weight 12 g
※ Sub weight is missing. A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. Clear contours, high earthquake resistance, highly accurate tone arms, etc., all of these are attractive cars with a degree of perfection that exceeds the price. Exterior, slight small scratches, abrasions, etc. can be seen (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: dust cover
Main specifications: Quartz control direct drive system speed 33.45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C)
Accessories: none
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unparalleled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior (repair, polishing, oil finish, front and rear baffle repair, painting, saran net replacement, frame repair) woofer maintenance (edge replacement, cone paper coating) midmaintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit rust removal, center adjustment, sound absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly and cleaning, Magnetic circuit rust removal, gap cleaning, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning) defuser repair)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu)
Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test)
Accessories: instruction manual, power cord
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
JBL medium bookshelf speaker Equipped with a newly developed compression driver, it uses a front twin port bass reflex system with a port at the bottom of the main body baffle. It is a speaker that is compatible with various genres, having both a high range that stretches comfortably and a low range with good sound separation. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, saran net
Main specifications: 2-way bookshelf type frequency characteristics 50 Hz to 40 kHz impedance 6 ohms crossover frequency 3.2 kHz W278 x H460 x D300 mm 12 kg
Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than the one after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. Serial AK9084 (Murakoshi Yoichi)
Maintenance information: 2024.4.19 maintenance (each SW, VOL cleaning, pin jack cleaning, lamp deterioration replacement, panel peeling correction, pin jack caulking, additional block capacitor installation, shield cable earth solder treatment, operation check)
Accessories: instruction manual (copy)
Main specifications: 4 input terminals, 4 PHONO input systems, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/15 sales price 498,000 yen*It is cheap because there is overall turbidity. The sound image localization and response unique to vertical twins are good, and they play a sharp sound right from the start. It is a floor-type, easy to play, and is a high-end machine that combines a high level of texture compatible with jazz as well as genre-free music. In addition to the cloudy exterior, there are large repair marks on the lower front panel on one side. Serial J975-010117 · J975-010119 (Kanai Hidetsugu)
Maintenance Information: 2024.4.15 Maintained (Exterior (Overall Cleaning/Touch Repair, Single Side Front Lower Panel Float Repair, Saran Net Tear Repair) Woofer Maintenance (Single Side Lower Woofer Damper Adhesion, Center Adjustment, Unit Detachable, 9V Battery Replacement))
Accessories: saran net, spike, spike holder, jumper plate
Main specifications: 3 way, 4 speakers, floor type frequency characteristics, 50 Hz to 40 kHz, low frequency playback characteristics, 28 Hz, output sound pressure level, 96 dB, impedance, 8 ohms, crossover frequency, 800 Hz, 10 kHz, W432 x H1, 245 x D413 mm, weight 83.9 kg
The strobe light is missing. Clear audio stroboscope There is a groove, and rotation can be checked while the cartridge is placed on it. Rotations up to 78 rotations can be confirmed at both 50 Hz and 60 Hz (Murakoshi Yoichi)
Accessories: none
Stroboscope included with Oyaide's BR-12 turntable seat. Measurement of up to 78 revolutions is possible. It comes with an overhang gauge. The large size and ease of adjustment are attractive (Murakoshi Yoichi)
Accessories: none
The deteriorated vacuum tubes etc. were replaced in 2023 and full maintenance has been completed! The vintage MC30 is still loved today, half a century later. The sharp high range and thick low to mid range sound are nothing short of wonderful. Since the left and right sides come out clearly without interference, you can feel a better sense of localization than a stereo machine. The good separation unique to mono amplifiers stands out, and it can play everything from jazz to classical music well (Murakoshi Yoichi)
Maintenance information: 2023.6.10 maintained (vacuum tube socket re-caulking repair, vacuum tube 12AX7 replacement, selenium countermeasure diode addition, 2W and 1/2W resistor replacement, HUM ADJ. readjustment/RCA jack re-caulking repair, operation check (measured at 25-38W SP:8Ω with rated output AC100-117 V).)
2012.6.12 Maintained (Capacitor Exchange/Mallory x 2, Sprag x 2, Europe x 2, Black Beauty x 10, Cornell x 2, Vacuum Tube, Partially Replaced with Good, Used, Silicon Rectifier, Vacuum Tube Pin, Rust Polishing and Socket Electrode Sack, Bolum, Sliding Surface Cleaning, RCA Pin Jack Cleaning, Each Voltage, Operation Inspection)
Accessories: none
Main specifications: rated output 30W, input sensitivity 0.5V vacuum tubes 6L6GC x 2, 5U4 x 1, 12AX7 x 2, 12BH7 x 1, 12AU7 x 1, W356 x H203 x D203 mm, weight 15.8 kg
The optical digital cable uses a 0.7 m high-reliability metal ferrule plug and APF (all plastic fiber). How about an introduction to optical connections? The exterior is dull and has a feeling of use. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
An Audio-Technica interconnect cable that uses a 1.5m pair of RCA cables and PCCC2 heavy coaxial cables. You can feel the dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Full maintenance from the unit, network, and exterior! A floor-type speaker full of furniture that uses plenty of walnut wood. A powerful Alnico magnet is used for the 38cm unit, and the synergistic effect with the cabinet makes the mid-high range fresh and dynamic sound. It is also attractive that the connection up to the high range is smooth (Kobayashi Hitoshi)
Maintenance information: 2024.4.17 Maintained (exterior repair/polishing/oil finish, saran net replacement, unit maintenance: low range side: edge replacement, magnetic circuit gap cleaning/center adjustment, high range side: magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT contact cleaning, terminal cleaning)
Accessories: saran net, key
Main specifications: 15 inch coaxial 2-way 3889 (AlcomaXLLL) efficiency 93 dB allowable input 150 W continuous input impedance 8 ohms frequency characteristics/28 Hz to 22 kHz internal volume 235 liters W705 x H1,110 x D480 mm 68 kg
*Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price.
Accessories: none
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
The price has been reduced. 2024/4/16 Sales price 198,000 yen Edge softening treatment, etc. Maintenance completed! Comes with a 7.5 kg DK-2000Z stand dedicated to the DK-2000Z class weight! The DS-2000Z thoroughly sought realistic sound. The sound quality is beautiful and glittering, conveying even the feeling of air with sound. Please try the high resolution sound source. There is a feeling of use due to appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 204.4.16 maintenance completed (exterior veneer float repair/cleaning, saran net replacement, woofer edge softening treatment)
Accessories: instruction manual, saran net
Main specifications: 3-way sealed system, bookshelf type speaker impedance 6 ohms playback frequency band 27 Hz to 80000 Hz output sound pressure level 90 dB maximum input 180 W dimensions W380 x H725 x D315 mm (356 mm with net) weight 37 kg stand dimensions W380 x H170 x D315 mm weight 27.5 kg
The disposal price has been reduced. 2024/3/31 sales price 378,000 yen equipped with a long arm RMG309i for SPU-G shells! The dust cover will be replaced with a new one in 2022. You can enjoy the fluffy feeling unique to Torrens belt drives, and the afterglow of the sound fading away. You can enjoy the rich sound of the SPU, which is firmly scraped out from the depths of the sound groove. The phono cable is made by Canale, and the manufacturer of the armrest is unknown. As for the exterior, there is a slight feeling of use, dullness, etc. on the arms and armrests. Serial 12396 (Murakoshi Yoichi)
Maintenance information: 2022.2.13 maintenance (new dust cover created)
Main specifications: TD-521 belt drive floating system compatible with 33/45/78 main body W550 x H180 x D410 mm 15 kg RMG309 dynamic balance type needle pressure 0 to 7 g total length 408 mm effective length 320 mm overhang 11 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/4/13 sales price 128,000 yen ※The PHONO board is for MC only (MM cannot be used). Maintained! It has an elegant and glossy tone, and although combinations with 405 are common, 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. There are small scratches and paint peeling on the right side. Serial 24151 (Takasaki Atsushi)
Maintenance information: 2024.4.12 maintenance (main board ground point screw reprocessing, operation check) 2024.1.17 maintenance (replacement of coupling C, bypass C, etc. in each board, AC SW spark killer C replacement, INPUT switching analog SW through hole pattern re-soldering, power SW internal contact polishing ~ operation check)
2020.6.13 Maintained (balance VR, SW disassembly cleaning. Attach 1 kΩ resistors to both the left and right sides of the flat board. Replaced due to faulty IC. All flat and mother boards have been soldered again. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation.)
Accessories: power cord, copy of manual
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.7 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
The original appeal of Arden, where a simple and beautiful design and deep sound coexist, has been revived due to full internal and external maintenance utilizing the original capacitors. This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. The sense of scale of the orchestra and the smooth playback of stringed instruments are satisfying enough to listen to. There are repair marks on the edge of the cone paper on one side and the top surface on one side. The exterior has been beautifully finished due to exterior maintenance. Serial 0016190/0005927 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 maintenance (exterior repair) 2022.5.30 maintained (output terminal contact cleaning. Chassis screw replacement. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (low range side: edge replacement, magnetic circuit rust removal/gap cleaning/center adjustment, high range side: magnetic circuit rust removal/gap cleaning/center adjustment. Exterior repair/polishing/oil finish Front and rear baffles/hakama repair/painting Saran net replacement. (Detachable unit)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2022/12/18 sales price 79,800 yen Columbia desktop gramophone Viva-tonal Grafonola. You can adjust the volume with the front fins. The sound box is equipped with No. 9. The exterior is in good condition, although there are some scratches and stains due to age, I think it is good considering the age (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
The disposal price has been reduced. Member discounts are not applicable. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
The disposal price has been reduced. Member prices are not applicable. 2024/3/7 sales price 128,000 yen Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. ※The leg is out of stock. The exterior has dullness and small scratches. Serial 4180 (Yonejima Satoshi)
Maintenance information: 2024.3.7 Maintained (single CH power stage transistor replacement. Screwdriver transistor resistor replacement. Drive Tr Capacitor Replacement Contact polishing, aging test)
Accessories: No accessories
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
The price has been drastically reduced. 2024/3/31 sales price 29,800 yen ※Currently sold. A model based on the DS-34B with improved sound quality and design. You can listen to a relaxed sound while also having a good cut. The enclosure is very sturdy, and is also equipped with multi-amp connection terminals. There is a feeling of use such as scratches, etc., viscoid sagging under the woofer, and damage to the low negative terminal of the multi. Serial 6676481/6676817 (Takasaki Atsushi)
Maintenance information: 2024.3.30 sound output confirmed
Accessories: saran net
Main specifications: 3 way 3 speaker system, sealed, maximum input, 40 W, playback frequency band, 35 to 20,000 Hz, W420 x H690 x D285 mm, 19 kg