The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu)
Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test)
Accessories: instruction manual, power cord
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Maintained. An attractive pre-main amplifier with a thick sound that is a bit different from the current Lux. It is a high performance amplifier equipped with a Plus-X power supply with ample stabilization control and a phono straight function. It is a model that is compatible with MM/MC and is easy to use. There is a feeling of use on the cabinet, such as scratches and chipped veneers. Serial A2503701 (Mizushima Itsuro)
Maintenance information: 2024.4.4 maintenance completed (disassemble all lever switches, polish contacts, apply contact cleaner, replace defective output relay contacts, replace power lamp, polish input/output pin jacks)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) W464 x H156 x D332 mm 11 kg
※ There are crack repair marks and chips on the remote control. Maintained! An improved model of the CDP-X555ES. Equipped with a pulse DAC developed in-house, it is the core model of the ES series and uses a sapphire bearing motor and a copper-plated FB chassis. The sound quality is soft and smooth even though it has a core in the mid to high frequencies. You can enjoy not only vocal sound sources, but also rich classical music and jazz. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Maintained (partial pickup dismantling, mechanical system and optical system adjustments on cleaning and polishing. Mechanism drive belt replacement. After disassembling the SPDL motor, wipe off the cured grease and reapply. Level volume wash)
Accessories: remote control, instruction manual, original box
Main specifications: PICKUP/KSS-272A D/A converter/CXD2562 digital filter/CXD2560 digital output: optical frequency characteristics 2Hz to 20kHz W470 x H125 x D375 mm 13 kg
Maintained! DENON's vintage pre-main. It has a sense of transparency, three-dimensionality, and sound field that you wouldn't think of an amp from the 70s. Also, be sure to try out the deep and tasteful tuning that you can never enjoy with the company's current models. The cost performance is high! You can see a feeling of use such as appearance, dullness, stains, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.24 maintenance completed (switch disassembly contact polishing, contact cleaner application) 2013.2.19 maintained (54 deteriorated transistors and capacitors replaced/use of nichikon MUSE, etc., RCA terminal replacement, speaker terminal replacement, input/output waveform confirmation, sound output test OK)
Accessories: copy of instruction manual
Main specifications: pre, main separable 32W+32W (8Ω) PHONO2 system (mm) W370 x H141 x D310 mm 8 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. The exterior has small scratches, dullness, and a feeling of use (Hiura Katsuji)
Maintenance information: 2020.9.7 maintenance completed (full arm disassembly, rewiring, arm bearing outer race cleaning, bearing ball replacement, oil lubrication, motor shaft oil lubrication, semi-fixed VR replacement for rotation adjustment, rotation adjustment implementation, needle pressure adjustment VR and operation SW disassembly, cleaning, auto sensor position adjustment, operation confirmation of each function, sound output check)
Accessories: M44G
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
*Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 242699 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 312009 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
* Source Direct SW cover is missing and cannot be used, so it is cheap (it is off). Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. Scratches, dullness, stains, and a feeling of use can be seen on the exterior and front edge (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 maintenance completed (select switch disassembly contact polishing grease applied, direct idling adjustment to the side where SD switch tone can be controlled (using repair auxiliary parts) operation tested)
Accessories: copy of instruction manual
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. It's very slightly to the right. Serial 718026 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
The price has been drastically reduced. 2024/4/11 sale price 59,800 yen Aura line exclusive premain amplifier. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There is a slight feeling of use, such as a missing screw in the center of the back, scratches on the top plate, etc., and some lettering disappeared (Murakoshi Yoichi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: power cord, copy of instruction manual
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
The price has been reduced. 2024/4/16 sales price 54,800 yen Marantz network player compatible with network audio, streaming, AirPlay2, Bluetooth, and USB memory, and is easy to use. PCM supports playback up to 192 kHz/24 bit, and DSD supports playback up to 5.6 MHz. The DAC is equipped with an ES9016K2M compatible with high-resolution sound source specifications similar to the ND8006. There is a slight feeling of use such as small scratches on the top plate. Serial BBL36190200699 (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: DSD 2.8/5.6 MHz compatible PCM 192 kHz/24 bit Playback frequency range 2 Hz to 100 kHz W440 x H106 x D371 mm (without antenna) 6.6 kg
MARK LEVINSON JC-2 power supply box produced by Rizaye. Operation has been confirmed. The main unit connection cable is not included. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 Operation confirmed (sound output confirmed on JC-2)
Accessories: power cable
Main specifications: W140 x H83 x D204 mm 1.1 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (output relay replacement, power amplifier circuit resistance replacement, power supply circuit capacitor replacement, tape selector, etc., switch disassembly, polishing grease application (input selector, power amplifier direct, source direct, reck-out, tone, loudness, muting switch), various volumes, switch cleaning, solder main part repair, pin jack polishing, interior and exterior inspection, cleaning, operation confirm)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
Maintained! A pre-main amplifier that inherits the sound of the D series and has achieved even lower distortion. A model where you can feel the uniqueness of Sansui at the time in the extrusion of low frequencies and sound creation. It's energetic, playable, and goes great with jazz and rock, and is compatible not only with MMs but also with MC, making it great for analog fans. There is a feeling of use such as dullness, abrasions, corrosion, dirt, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.11.21 Maintained (balance, main volume, output relay, power supply floating resistor, Mylar capacitor, equalizer section op amp replaced. Input selector and other rec outs, tone, subsonic, and muting switches are disassembled and polished grease is applied. (Each volume, switch cleaning, solder repair, interior and exterior inspection and cleaning, adjustment inspection.)
Accessories: copy of the instruction manual
Main specifications: 75W+75W (8Ω) PHONO (MM/MC) W445 x H163 x D403 mm 12.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Black, the highest peak in the 2M series, is now in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information on 2M's highest peak is truly one word (Hiura Katsuji)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: original instruction manual box
Main specifications: output voltage 5 mV frequency characteristics 20 to 31,000 Hz internal resistance 47 ohms suitable needle pressure 1.5 g dead weight 7.2 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
The disposal price has been reduced. Member discounts are not applicable. 2022/12/18 sales price 79,800 yen Columbia desktop gramophone Viva-tonal Grafonola. You can adjust the volume with the front fins. The sound box is equipped with No. 9. The exterior is in good condition, although there are some scratches and stains due to age, I think it is good considering the age (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg
*Both the main body and ottoman are inexpensive because the leather is torn and leaves a feeling of use. Ottoman with optional swing table Scandinavian design stressless chair. It is the best recliner that reclines naturally by simply putting weight on the backrest, and lifts up the backrest at the same time as the body is raised ※Shipping is estimated separately. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, threads, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W75×H96-106×D75mm ottoman W55×H40×D41mm
※The sound output has been confirmed, but since it is not compatible with the manufacturer, it will be handed over as is. It is a cost-effective USB DAC with a built-in headphone amplifier. The DAC is equipped with 2 8-channel DACs “ES9016” made by ESS. The headphone amplifier is also compatible with 4-pin and 3-pin XLR terminals (balanced drive). There are plenty of connection terminals, so you can connect to a PC, CD, TV, etc. The clear and tight sound does not choose any music genre. Serial ODID0019101JP (Mizushima Itsuro)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (damaged), power cable
Main specifications: sampling frequency/USB input (PCM) 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit) USB input (DSD) 2.8 MHz, 5.6 MHz COAXIAL/OPTICAL/AES/EBU input 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit) digital input USB 1 system, COAXIAL2 system, OPTICAL2 system, AES/EBU (XLR3) 1 system analog output unbalance (RCA) 1 system balanced output (XLR3) 1 system (with fixed level/variable switching, with phase switching function) headphone output imbalance (STD) 1 system, balance (XLR3) 1 system, balance ( XLR4) 1 system W296×H101×D271mm 6.3 kg
Maintained! The 306 series was supported as a pure audio entry model. It has plenty of phono circuits, is MM/MC compatible, and impedance can be adjusted. Clear, high quality sound quality with W super servo system. I feel that the sound quality, which has a slight core, is good in this era. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.22 maintenance completed (mode, recout, input, subsonic, cartridge, phono selector switch disassembly, polishing grease application, replacement of all indicator lamps, solder repair, pin jack polishing, internal inspection and cleaning, each volume, switch cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: PHONO (MM/MC) 2 system frequency characteristics 0.8 Hz to 170 kHz dimensions W480 x H100 x D403 mm weight 10.5 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A sound field tuning panel with strong stainless steel ribs with a thickness of 3 mm attached to Cirlogic's wooden tuning panel to give it the ability to contain deep bass. The hollow structure of coniferous plywood and pine wood enhances the transparency of sound quality. There are various ways to use it depending on the installation method, and it is versatile, such as expanding the listening point and enjoying sound quality with a comfortable sound field even in the living room, or absorbing boomy sound quality and enjoying fresh sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: Dimensions W910 x H1300 x D61 mm 26.6 kg (actual measurement)
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
*Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price.
Accessories: none
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
*Currently sold. Remote control is missing. A powerful machine with thick mid-range and enhanced musicality. We are currently putting in an unimaginable amount of material. It also works well with vintage speakers and amplifiers. There is a feeling of use such as dullness and scratches. Serial 204286 (Takasaki Atsushi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: copy of the manual
Main specifications: 2 to 20 kHz W430 x H125 x D375 mm 12.0 kg
The price has been drastically reduced. 2024/3/31 sales price 29,800 yen ※Currently sold. A model based on the DS-34B with improved sound quality and design. You can listen to a relaxed sound while also having a good cut. The enclosure is very sturdy, and is also equipped with multi-amp connection terminals. There is a feeling of use such as scratches, etc., viscoid sagging under the woofer, and damage to the low negative terminal of the multi. Serial 6676481/6676817 (Takasaki Atsushi)
Maintenance information: 2024.3.30 sound output confirmed
Accessories: saran net
Main specifications: 3 way 3 speaker system, sealed, maximum input, 40 W, playback frequency band, 35 to 20,000 Hz, W420 x H690 x D285 mm, 19 kg
The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 28,000 yen ※2 shelves are missing. This model has an open form and is perfect for heat dissipation. This is a weight rack whose spacing can be changed with L-shaped brackets and screws. There are many dents and line marks on the exterior, top surface, and shelf boards, and dullness and a feeling of use can also be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: shelf board size W525 x D470 mm total load capacity approx. 250 kg W626 x D582 x H1122 mm 64 kg
Shure's final high-end cartridge model. It has a smooth sound that is different from the thick, jazz-friendly series, and vocals and classical music are carefully reproduced. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: mm type oval needle frequency band 20 Hz to 22 kHz needle pressure 0.75 to 1.5 g (appropriate 1.25 g) dead weight 7 g
The price has been reduced. 2024/4/8 sales price 15,000 yen balance cable 1.5m pair standard AccuPhase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. On the exterior, the cover at the base of the plug is damaged, and there is a feeling of use such as dullness (Hiura Katsuji)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. Needle cover missing, slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.1.13 sound output confirmed
Accessories: none
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g