An Audio-Technica interconnect cable that uses a 1.5m pair of RCA cables and PCCC2 heavy coaxial cables. You can feel the dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
The deteriorated vacuum tubes etc. were replaced in 2023 and full maintenance has been completed! The vintage MC30 is still loved today, half a century later. The sharp high range and thick low to mid range sound are nothing short of wonderful. Since the left and right sides come out clearly without interference, you can feel a better sense of localization than a stereo machine. The good separation unique to mono amplifiers stands out, and it can play everything from jazz to classical music well (Murakoshi Yoichi)
Maintenance information: 2023.6.10 maintained (vacuum tube socket re-caulking repair, vacuum tube 12AX7 replacement, selenium countermeasure diode addition, 2W and 1/2W resistor replacement, HUM ADJ. readjustment/RCA jack re-caulking repair, operation check (measured at 25-38W SP:8Ω with rated output AC100-117 V).)
2012.6.12 Maintained (Capacitor Exchange/Mallory x 2, Sprag x 2, Europe x 2, Black Beauty x 10, Cornell x 2, Vacuum Tube, Partially Replaced with Good, Used, Silicon Rectifier, Vacuum Tube Pin, Rust Polishing and Socket Electrode Sack, Bolum, Sliding Surface Cleaning, RCA Pin Jack Cleaning, Each Voltage, Operation Inspection)
Accessories: none
Main specifications: rated output 30W, input sensitivity 0.5V vacuum tubes 6L6GC x 2, 5U4 x 1, 12AX7 x 2, 12BH7 x 1, 12AU7 x 1, W356 x H203 x D203 mm, weight 15.8 kg
The price has been drastically reduced. 2024/4/18 sales price 118,000 yen This MC boost transformer is ideal for SPUs using the JS transformer TYPE0.32M No. 6600. The sharp high frequencies and the tenacious sound in the mid and low frequencies make the SPU sound even more energetic. There is rust on the exterior due to paint peeling (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: boost ratio 31 times with bypass function, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ dimensions W90 x H68 x D88 mm weight 420 g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Full maintenance from the unit, network, and exterior! A floor-type speaker full of furniture that uses plenty of walnut wood. A powerful Alnico magnet is used for the 38cm unit, and the synergistic effect with the cabinet makes the mid-high range fresh and dynamic sound. It is also attractive that the connection up to the high range is smooth (Kobayashi Hitoshi)
Maintenance information: 2024.4.17 Maintained (exterior repair/polishing/oil finish, saran net replacement, unit maintenance: low range side: edge replacement, magnetic circuit gap cleaning/center adjustment, high range side: magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT contact cleaning, terminal cleaning)
Accessories: saran net, key
Main specifications: 15 inch coaxial 2-way 3889 (AlcomaXLLL) efficiency 93 dB allowable input 150 W continuous input impedance 8 ohms frequency characteristics/28 Hz to 22 kHz internal volume 235 liters W705 x H1,110 x D480 mm 68 kg
*Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price.
Accessories: none
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
The price has been reduced. 2024/4/16 Sales price 198,000 yen Edge softening treatment, etc. Maintenance completed! Comes with a 7.5 kg DK-2000Z stand dedicated to the DK-2000Z class weight! The DS-2000Z thoroughly sought realistic sound. The sound quality is beautiful and glittering, conveying even the feeling of air with sound. Please try the high resolution sound source. There is a feeling of use due to appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 204.4.16 maintenance completed (exterior veneer float repair/cleaning, saran net replacement, woofer edge softening treatment)
Accessories: instruction manual, saran net
Main specifications: 3-way sealed system, bookshelf type speaker impedance 6 ohms playback frequency band 27 Hz to 80000 Hz output sound pressure level 90 dB maximum input 180 W dimensions W380 x H725 x D315 mm (356 mm with net) weight 37 kg stand dimensions W380 x H170 x D315 mm weight 27.5 kg
The price has been reduced. 2024/4/16 sales price 54,800 yen Marantz network player compatible with network audio, streaming, AirPlay2, Bluetooth, and USB memory, and is easy to use. PCM supports playback up to 192 kHz/24 bit, and DSD supports playback up to 5.6 MHz. The DAC is equipped with an ES9016K2M compatible with high-resolution sound source specifications similar to the ND8006. There is a slight feeling of use such as small scratches on the top plate. Serial BBL36190200699 (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: DSD 2.8/5.6 MHz compatible PCM 192 kHz/24 bit Playback frequency range 2 Hz to 100 kHz W440 x H106 x D371 mm (without antenna) 6.6 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.7 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/15 sales price 498,000 yen*It is cheap because there is overall turbidity. The sound image localization and response unique to vertical twins are good, and they play a sharp sound right from the start. It is a floor-type, easy to play, and is a high-end machine that combines a high level of texture compatible with jazz as well as genre-free music. In addition to the cloudy exterior, there are large repair marks on the lower front panel on one side. Serial J975-010117 · J975-010119 (Kanai Hidetsugu)
Maintenance Information: 2024.4.15 Maintained (Exterior (Overall Cleaning/Touch Repair, Single Side Front Lower Panel Float Repair, Saran Net Tear Repair) Woofer Maintenance (Single Side Lower Woofer Damper Adhesion, Center Adjustment, Unit Detachable, 9V Battery Replacement))
Accessories: saran net, spike, spike holder, jumper plate
Main specifications: 3 way, 4 speakers, floor type frequency characteristics, 50 Hz to 40 kHz, low frequency playback characteristics, 28 Hz, output sound pressure level, 96 dB, impedance, 8 ohms, crossover frequency, 800 Hz, 10 kHz, W432 x H1, 245 x D413 mm, weight 83.9 kg
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Stereo mini jack to RCA male conversion cable 0.2 m has an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.6 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The exterior of the woofer mounting clamp, which seems to be a self-made set of 5, has variations in the cutting part, there are corrosion and mounting marks all over, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
Speaker cable 2.0m pair A standard BELDEN speaker cable nicknamed “sea snake” with untreated terminals. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
The price has been reduced. 2024/4/13 sales price 8,000 yen. Magnesium alloy body headshell Since it has excellent vibration absorption, it maximizes the potential of the cartridge. In addition to the exterior and lead being changed to a single wire, there are slight mounting marks, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Main specifications: Twin lock pins made of magnesium alloy, weight 12 g
Maintained. Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has dirt, sticker marks, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.13 Maintained (broken cantilever, damper adjustment, vibration system replacement)
Accessories: original box needle cover
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
Maintained. Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.13 Maintained (broken cantilever, damper adjustment, vibration system replacement)
Accessories: original box needle cover
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/13 sales price 128,000 yen ※The PHONO board is for MC only (MM cannot be used). Maintained! It has an elegant and glossy tone, and although combinations with 405 are common, 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. There are small scratches and paint peeling on the right side. Serial 24151 (Takasaki Atsushi)
Maintenance information: 2024.4.12 maintenance (main board ground point screw reprocessing, operation check) 2024.1.17 maintenance (replacement of coupling C, bypass C, etc. in each board, AC SW spark killer C replacement, INPUT switching analog SW through hole pattern re-soldering, power SW internal contact polishing ~ operation check)
2020.6.13 Maintained (balance VR, SW disassembly cleaning. Attach 1 kΩ resistors to both the left and right sides of the flat board. Replaced due to faulty IC. All flat and mother boards have been soldered again. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation.)
Accessories: power cord, copy of manual
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
※Only 1 speaker cable, 1.9 m terminal, is a cable with high sound quality and is easy to handle with an untreated titanium-containing sheath. There is a feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Speaker cable with soldered 0.9 m pair ends It is a solid sound that clearly shows the backbone of an LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Stereo mini plug to stereo mini plug cable 1.5m audio technica GATE LINK series mini plug cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Standard plug to RCA cable 2.0m used for transmission from a headphone output such as a deck to an RCA input such as an amplifier (Yoichi Murakoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unchecked
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Optical digital cable 0.75m TEAC TOSLINK cable It is attractive because it is soft and easy to handle. There is a feeling of use such as dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The price has been drastically reduced. 2024/4/11 sale price 59,800 yen Aura line exclusive premain amplifier. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There is a slight feeling of use, such as a missing screw in the center of the back, scratches on the top plate, etc., and some lettering disappeared (Murakoshi Yoichi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: power cord, copy of instruction manual
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
*Currently sold. Remote control is missing. A powerful machine with thick mid-range and enhanced musicality. We are currently putting in an unimaginable amount of material. It also works well with vintage speakers and amplifiers. There is a feeling of use such as dullness and scratches. Serial 204286 (Takasaki Atsushi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: copy of the manual
Main specifications: 2 to 20 kHz W430 x H125 x D375 mm 12.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The price has been drastically reduced. 2024/4/10 sales price 238,000 yen Maintenance completed! A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. There is rust on the exterior, top plate, and sides, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.10 maintenance completed (each SW, VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, pattern re-soldering, connector direct soldering, glass panel peeling correction, operation check)
Accessories: copy of instruction manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.4 meter pairs of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 0.95m pair end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none