Lots of accessories! Pioneer's popular ribbon tweeter. Using lightweight and highly rigid beryllium diaphragms and Alnico magnets, the delicate, high-quality high range is still an attractive gem. Good product with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.3.29 sound output confirmed
Accessories: instruction manual, pedestal, original box, protective cover
Main specifications: ribbon tweeter with fuse protection circuit, playback frequency 5,000 Hz to 120,000 Hz, 8 ohms, sound pressure 97.5 dB, maximum input 100 W, rated input 50 W (both 5 kHz, -12 dB/when using an OCT network) W134 x H89 x D179 mm 2.6 kg
※There is a slight gap in the balance volume at present. Has been inspected by the manufacturer. Denon's flagship pre-main amplifier. The biggest feature is the mid-low range, which is full of energy, supported by a strong power supply unit. The driving power that drives a large speaker briskly is of a quality close to that of a separate amplifier. The exterior has small dents on the top surface, abrasions on the volume, and other dullness. Serial 4041500299 (Murakoshi Yoichi)
Maintenance information: 2024.3.28 manufacturer inspection (The installation of the volume volume has been corrected. Operation test OK)
Accessories: instruction manual
Main specifications: UHC-MOS single PP 50W+50W (8Ω) line input 5 systems (XLR x 1, RCA x 4) tape system 2 systems phono (MM) 1 system W434 x H155 x D493 mm 25.5 kg
There is a lot of dirt on the exterior, and the sponge inside is gone, so it's cheap. SRM-T1 and SR-LM signature set It is a model that excellently mixes the softness of a vacuum tube with the wide range characteristics of a transistor. You can enjoy the perfect balance between the clear sound that you won't get tired of listening to and the taste of a vacuum tube (Murakoshi Yoichi)
Maintenance information: 2024.3.29 sound output confirmed
Accessories: power cable
Main specifications: [SRM-T1] 3 output systems (provider x 2, normal bias x 1) vacuum tube 6FQ7 x 2 W195W x H103H x D375 mm 3.9 kg
Speaker cable 2.0m pair This is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
Refreshed and maintained in 2021. It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc., even now. There are repair marks on the exterior (Hiura Katsuji)
Maintenance information: 2021.5.1 maintained (exterior repair/polishing/oil finish front and rear baffle coating saran net replacement saran plate repair diffuser cleaning woofer maintenance mid maintenance driver maintenance (magnetic circuit gap cleaning/center adjustment sound absorbing material replacement screw replacement various cleaning)
Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, various cleaning) unit detachable terminal rust removal, acid washing, insulation bush & mounting screws replacement, internal connection terminal replacement from faston to round terminal, ATT brand new replacement, INT/EXT switching SW contact sulfide removal, polishing, and cleaning. Frequency characteristic measurement check (~ 42 kHz) is performed, and only 1 μF for UH (tweeter) is exchanged, input/output waveform and balance confirmation sound output check)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/10 sales price 898,000 yen Exterior repairs, paint, drivers, networks, etc. have already been maintained and the interior and exterior have been refreshed! The outstanding vocal band and the sense of energy of the reverberating horn are remarkable. Please experience the sound full of energy typical of ALTEC (Takasaki Atsushi)
Maintenance information: 2024.3.5 maintained (exterior repair/full paint, horn paint, simple cleaning and installation processing, driver maintenance: magnetic circuit gap cleaning/center adjustment, terminal cleaning, horn mounting screw thread cutting, network maintenance: frequency characteristic check, ATT cleaning, ATT screw contact cleaning, main body cleaning/touch repair, unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: horn 311-90+ driver 288-16K+ woofer 515E+ network N500-FA enclosure 828G W760 x H1375 x D610 mm
※Only 1 interconnect cable 2.0m professional cable used in studios and stages. The sound is clear and the sound is straightforward (Takasaki Atsushi)
Maintenance information: 2023.12.10 continuity confirmed
Accessories: none
Standard jack to RCA cable 1.0m Vestax interconnect cable. It is useful for connecting business devices. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2023.7.21 continuity confirmed
Accessories: none
Set of 4 A wood block speaker stand made of laminated chipboard. There are scratches and broken veneers (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H190×D390mm 5.2 kg/bottle
1 bottle only The 1.0m end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.1.26 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/22 sales price 250,000 yen ※117V specification. Maintained! McIntosh's initial solid state power amplifier. The rich and powerful sound unique to the vintage Mackin is full of appeal that is different from the current model. When combined with the company's C26 preamp, you can enjoy the flavor unique to vintages that are even thicker and darker. There is a feeling of use such as scratches, rust, and slight panel peeling. Serial AH1163 (Takasaki Atsushi)
Maintenance information: 2024.3.21 maintenance (SP switch replacement, rubber foot installation, panel headphone peeling correction (other characters cannot be corrected) lamp replacement, power stage Tr, C, meter board pod replacement, SW, VOL cleaning)
Accessories: instruction manual (copy)
Main specifications: output 105 W+105 W (4/6/8 ohms) LR volume control speaker switch with headphone terminal W440 x H225 x D390 mm approx. 35 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/13 sales price 198,000 yen*Replacement brand new remote control included (no tray opening/closing button). Denon's flagship CD/SACD player. The thick mid to low range and the highly textured mid to high range sound were the deciding factors for the best seller. The high level of musicality stands out even when compared to modern players. There are many scratches on the exterior and top plate, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Operation confirmed
Accessories: copy of instruction manual, power cord, replacement remote control
Main specifications: SACD/CD player, 4 DAC, fully balanced output configuration, 2 line outputs (XLR/RCA), digital input/output coaxial, 1 optical system each equipped with pure direct mode, W434 x H150 x D410 mm, 21.8 kg
The price has been drastically reduced. 2024/3/26 sales price 268,000 yen SSD 1TB type. A digital audio solution that provides everything from sound source capture to playback in one stop. Built in Diretta Host. It is equipped with an audio-quality media server function, USB-DAC support (network transport function), CD ripping function, and CD transport function. Various digital sound sources, from CD ripping to high-resolution sound sources, can be played back with high definition (Hiura Katsuji)
Maintenance information: 2024.3.24 sound output confirmed
Accessories: instruction manual power cable
Main specifications: USB-DAC output format PCM format (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz) DSD format (DoP) (2.8 MHz, 5.6 MHz, 11.2 MHz) LAN interface 1000BASE-T, 100BASE-TX, 10BASE-T USB port USB 2.0 x 1 Network UPnP AV, DLNA1.5 external dimensions W350 x H64 x D350 mm, mass approx. 6 kg
The price has been drastically reduced. 2024/3/27 sales price 278,000 yen*It is inexpensive because conspicuous scratches and other small scratches are scattered on the front panel. An advanced model of the company's SACD player with a beautiful blaster white body color. This is a powerful machine with a higher fidelity tone than conventional luckstones, sound images with high instantaneous power, and a vast sound field. The high resolution in the mid to low range is particularly attractive. In addition to front line injuries, there are small scratches on the lower left and right sides of the front panel (Murakoshi Yoichi)
Maintenance information: 2024.3.27 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player, D/A converter equipped with PCM1792 x 2, W440 x H140 x D383 mm, 15.5 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. Compact and lightweight phono equalizer. Please use it with a Miji component or premain amplifier without a phono input. It's also perfect as an introductory machine. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.19 Operation confirmed
Accessories: AC power adapter
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
Stereo standard jack extension cable 3.0 m model number unknown, Sony standard jack extension cable Uses OFC wire and gold-plated plugs. How about an extension cable for headphones (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
RCA cable 5.0 m pair TEAC RCA cable with unknown details. The cable has a slim plug and is easy to use even for vintage products. There is some stickiness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with 2.3 m pairs of untreated ends. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
Speaker cable 2.0m pair This is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
Speaker cable is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.5m pair end. The cable braided in orange and black is impressive, and it features a tight sound. The exterior is dull (Kanai Hidetsugu)
Maintenance information: 2024.3.28 Continuity confirmed
Accessories: none
S-terminal video cable 1.0m This is a rare S-terminal cable with a compact plug. If you've been looking for one, why don't you take this opportunity (Kanai Hidetsugu)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: none
First model of the Fostex bookshelf speaker “GR Series”. Although it is a bookshelf type, it is a model that achieves high quality and sufficient amount of bass reproduction, so feel free to enjoy the bass you feel on your body. There are no noticeable scratches on the exterior. Serial 1000080, 1000240 (Murakoshi Yoichi)
Maintenance information: 2024.3.28 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex cross 2.0kHz output sound pressure level 85dB playback frequency band 50Hz to 35kHz impedance 8Ω maximum allowable input 100W W228 x H390 x D273 mm approx. 8.6 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
The price has been drastically reduced. 2024/3/20 sales price 15,000 yen. Speaker stand made for Pioneer S-HE10. The slightly taller, exquisite size that seems to fit other companies' large bookshelves is attractive. The pillars are also well-made. There is a lot of feeling of use such as small scratches on the whole, felt rolls on the installation surface, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: installation surface W379 x D379.5 mm External dimensions W425 x H320 x D435 mm 13.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/22 sales price 25,000 yen. A boost transformer using the “Columbia Low Frequency Transformer 834-003” at the heart of the DENON AU-320. Although it is self-made, it is equipped with 2 input systems and a PASS function (Murakoshi Yoichi)
Maintenance information: 2024.3.21 sound output confirmed
Accessories: none
Main specifications: 40 ohms, pass switching cable length 1.15 m, main unit W80 x H50 x D150 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/3/3 sales price 10,000 yen Set of 4 spike insulators for VRDS-25X. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: diameter 55mm 88g
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
An entry-class MC cartridge from the Technica 80s. It is also suitable for getting started with MC cartridges. The cantilever is slightly to the left (Takasaki Atsushi)
Maintenance information: 2024.3.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.5 mV 10 ohm 20 Hz to 40 kHz needle pressure 1.4 g to 2.0 g dead weight 4.2 g
This headshell is machined from hard aluminum to ensure sufficient strength in each part. The simple design is excellent. Dullness, slight scarring (Takasaki Atsushi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: dead weight 14g
This headshell is popular due to its combination with the Technics and SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Comes with a 4g sub weight! This headshell is popular in combination with the SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: weights
Main specifications: Die-cast aluminum, dead weight 10.2 g (+ 4 g)
D-component video cable uses a 1.3 m RCA-D terminal specification PCCC+Hi-OFC hybrid conductor. If you've been looking for one, go ahead. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity Unconfirmed
Accessories: none
The 5.0 m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 0.7m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Sony's RCA. This is a cable connection plug. If you've been looking for one, please take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/24 sales price 698,000 yen This is AVALON's early luxury speaker ASCENT MK2. It recreates a vast spatial expression that extends backwards from its unique beautiful formative beauty, which can be said to be the prototype of DIAMOND. The sound field reproduction unique to the company, which can be said to be three-dimensional, is overwhelming even at this time of year. Exterior, the saran net has been replaced with a reddish brown color, and 1 Y lug on the connection cord is missing, but the main body is generally good with dullness and small scratches (Kobayashi Hitoshi)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: network, saran net, connection cord
Main specifications: 3 way 3 speakers 6Ω 90db body size W330 x H1143 x D457 mm 72.6 kg network part W305 x H813 x D305 mm 25 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been drastically reduced. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
Hamilex audio rack It is a polyurethane resin coating finish with excellent water resistance, weather resistance, and color retention. There are repairs to the top corner of the bottom and others. Please contact us for shipping costs (Murakoshi Yoichi)
Accessories: none
Main specifications: W618 x H1000 x D560 mm 53 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.14 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
It is a famous machine with a velvet transformer that was maintained in 2016, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. The input terminals are gold-plated terminals. Appearance, loss of lettering, light rust, dullness, scuffs, etc., and a sense of use appropriate for the age can be seen (Kanai Hidetsugu)
Maintenance information: 2016.9.30 maintained (VT12AX7 replacement block.c100μf x 2 replacements, 2 block.c80/40/30/20 μf replacements, AC cord exchange, thermistor replacement, 4 R1/2W replacements, VT socket and RCA jack caulking repair*Other parts check OIL.C and ELC have been replaced by other companies (B.B B.C. SPRAGUE Mallory, etc.)
Accessories: none
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Full maintenance has been completed, including block capacitors and capacitor replacements. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. A feeling of use can be seen on the exterior, dullness, small scratches, scratches, rust, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.23 maintained (100 μF x 2 others replaced with F&T → CE products, 4 additional baking plates, 4 oil capacitors, 0.22 μF replacement, 2 W and 1W domestic → USA products, 3 selector knobs missing, additional input part, ground reinforcement repair, vacuum tube socket and RCA jack re-caulking repair* Other operation checks completed (30-41 W SP with rated output AC 100 to 117 V :Measured at 8 ohms))
Accessories: none
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Fully maintained in 2016, exterior repairs have been carried out again, and the finish is very beautiful. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Kobayashi Hitoshi)
Maintenance information: 2024.3.16 maintained (exterior repair/cleaning, velcro replacement, saran net repair/frame repair) 2016.4.7 maintained ([exterior] exterior paint, chipped putty repair/bulge part repair, front and rear baffle painting, saran net replacement, woofer coker cone paper coating, unit detachment [2231A] edge replacement [2121] edge replacement [2420] diaphragm Installation adjustment, DCR (44563/5.5 ohm diaphragm no scratch), DCR (43429/5.7 ohm diaphragm no scratch) [network] remove the modified LF wiring. Reinstall and rewire the terminals (external products) and clean them. Replace faulty resistors (both sides). ATT exchange. INT/EXT switch-over SW cleaning Capacitor replacement. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: saran net diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
* Since there is no remote control, the only operation is to play, open/close the tray, send songs, and return songs. A REVOX CD player that is completely simple and excludes everything superfluous as much as possible. Equipped with a Philips swing arm mechanism, the vintage sound that cannot be enjoyed on today's CDs is attractive. The combination of Philips Mecha and a 1-bit bitstream D/A converter works great with CDs from that time that have not been remastered. The exterior is dull, but there are no noticeable scratches (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 Operation confirmed (since there is no remote control, only operations are playback, open/close the tray, send songs, and rewind songs)
Accessories: power cord
Main specifications: Genuine RF, 1-bit bitstream D/A converter with swing arm mechanism, W470 x H104 x D366 mm, approx. 7.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/21 sales price 128,000 yen Maintained! This amplifier marked the end of the X series, which began with the AU-X1. It is a model with a weight of 35 kg and a solid investment in material volume. You can enjoy a powerful Sansui sound with full torque. Sidewoods are non-genuine products. There are several bruises and letter rubbing on the front panel and side panels (Murakoshi Yoichi)
Maintenance information: 2024.3.16 maintenance (phono circuit relay, power amplifier volume, selector lamp, power switch, power amplifier circuit transistor replacement, equalizer IC, power supply unit floating resistor replacement. Speaker, power amplifier operation, jump, subsonic, MM/MC switching SW disassembly polishing grease application, power amplifier, power supply part solder repair, pin jack polishing, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: effective output 150W+150W (6Ω), 110W+110W (8Ω) dimensions W470 x H178 x D486 mm weight 35.1 kg
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)