Maintained by Denon service! A new dust cover has also been created. The MG-10 shell and M44G cartridge are included, so you can enjoy records right away! A direct drive player with a simple design and operation. The semi-automatic specification automatically raises the arm and stops after the performance is over, so there is no need to worry about damaging the record or needle. I recommend it as an introduction to analog. The exterior has chipped cabinet repair marks (Sasaki Shota)
Maintenance information: 2024.12.7 manufacturer maintained (transistors with rusted feet, strobe lighting capacitors replaced. Arm disassembly, lubrication, and cleaning. speed adjustment. It is about 15 mm taller than the regular one due to the replacement and replacement of the insulator. Sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) shell (audio-technica MG-10) phono cable
Main specifications: Direct drive static balance type W485 x H163 x D375 mm 10 kg
Sony Walkman 40th anniversary special model! The design, which takes care of the cassette-like display during playback just like the original Walkman, is attractive, and it is an irresistible item for people who know that time. Of course, it is compatible with Bluetooth and Hi-Res, just like today. The internal memory is 16GB and is compatible with micro SD cards. The deterioration of the soft case is noticeable (Sasaki Shota)
Maintenance information: 2024.12.7 operation confirmed
Accessories: original box, manual, soft case, charging cable
Main specifications: digital audio player, built-in memory, 16 GB, LCD size, 3.6 inches, maximum sampling frequency, up to DSD 11.2 MHz, 103 g
The price has been reduced. 2024/11/30 sales price 69,800 yen Marantz small pre-main amplifier with built-in USB DAC. It was also developed in parallel with the new flagship Primaine “PM-10,” and at a reasonable price, it has a sound that shows a glimpse of that. I also recommend this one for those starting out with serious audio. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2024.11.30 (Sound output operation confirmed up to PCM384 kHz/DSD 11.2 MHz)
Accessories: remote control, power cable, manual, original box
Main specifications: USB input PCM384 kHz/DSD 11.2 MHz rated output 35W+35W (8Ω) dynamic power 70W+70W (4Ω) input terminal/USB-B x 1, USB-A (front) x 1, coaxial digital x 1, optical digital x 2, analog x 2, output terminal/headphone x 1, subwoofer x 1, W304 x H107 x D352 mm 5.8 kg
This is an RME USB audio interface. Equipped with a 192 kHz AD/DA converter and 2 high-definition microphone preamps! It is also equipped with a 200MHz SteadyClock, which also suppresses jitter peculiar to digital. Digital input/output, headphone terminals, and TRS unbalanced terminals are built into the main unit, and since they are compatible with USB bus power, minimal system construction is possible (Tamura Eiji)
Maintenance information: 2024.12.6 operation confirmed
Accessories: case, instruction manual, connection cable*Driver CD missing
Main specifications: analog input/XLR x 2 analog output: /XLR x 2 TRS phone x 1 digital input/optical terminal x 1 digital output/optical terminal x 1 W100 x H25 x D160 mm approx. 500 g
Fully equipped with accessories such as 3 types of weights, 2 types of subweights, and 3 types of arm pipes! Oil dump system with static balance. There is no impression that arms are high in recent years, and they play well-balanced music in the mid to low range with a sense of stability, and there are speckled dullness and discoloration in places (Kojima Yosuke)
Maintenance information: 2024.12.6 continuity, movable part operation confirmed
Accessories: instruction manual, 3 weights, 2 sub-weights, 3 arm pipes (1 S-shaped arm/2 straight arms), template, cartridge fixing screws, phono cable
Main specifications: static balance type, total length 333 mm, effective length 237 mm, overhang 15 mm, needle pressure adjustment 0 to 5 g (0.25 g steps), compatible cartridge, dead weight, 14 to 33 g, arm base, mounting hole diameter 40 mm
Maintained! It is a combination of the stickiness of the 60Hz Garrard 301 and the Audio-Technica AT-1503/4 arm, which has few guts and habits. It is a set that successfully combines straight, detailed, and delicate expressions, and can be enjoyed regardless of genre. The external condition shows signs of use such as dullness, abrasions, and scratches over time. *Although it is a 60 Hz specification, the strobe on the platter is not compatible because it has a 50 Hz specification. Serial 68519 (Takahashi Nobuyuki)
Maintenance information: 2024.12.5 maintained (ON, OFF linage disassembly, rust stain cleaning, assembly adjustment, etc. AC cord handling correction motor disassembly/check, lubrication, assembly, main bearing disassembly, CHEC, lubrication, oil seal application, assembly idler cleaning rotation switching lingauge disassembly cleaning, assembly, adjustment TT mat oil cleaning, felt replacement transportation (Running test with additional blade fixing screw sirlip)
Accessories: A copy of the English instruction manual
Main specifications: AT-1503/4: static balance type, total length 320 mm, execution length 257 mm, overhang 15 mm, needle pressure range 0 to 3.0 g (0.5 g steps) cartridge weight 1 to 19 g (shell not included) GARRARD 301: idler drive 33, 45, 78 rotations compatible W500 x H210 x D403 mm
※Since there is no manufacturer, there is no guarantee. CSE isolation regulator. The output is 60Hz/100V. PSE standard product. It makes a clean sound with miscellaneous notes removed. There are small wounds and dullness (Daiki Goto)
Maintenance information: 2024.12.4 storefront operation confirmed
Accessories: power cable
Main specifications: rated output 50W output voltage 100V output frequency 60Hz W217 × H59 × D379 mm weight 5 kg
*The bolt that stops the spike no longer rotates once, but this is the current situation. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: spikes
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
The disposal price has been reduced. Member prices are not applicable. 2024/9/23 sales price 22,000 yen*The edge has been replaced with a urethane edge. Both midrange center caps have dents. There is no problem with the sound, but it will be handed over as is. Diamond Tone's standard 3-way speaker made a name for itself as a gateway to audio success at the time. The overall balance is good and the sense of volume in the low frequencies is sufficient. You can enjoy all genres of music. The DIATONE batch of saran nets is missing, and there are a few saran net holes. There is a slight veneer crease in the corner on the back of the speaker. Serial 13541/13542 (Yasuhito Koshihama)
Maintenance information: 2024.9.23 storefront operation confirmed (sweep check OK)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed, bookshelf type, anti-magnetic type, impedance, 6 ohms, playback frequency band, 32 Hz to 32,000 Hz, sound pressure 91 dB, crossover frequency, 600 Hz/4,000 Hz, maximum input 150 W, W380 x H695 x D 295 mm (330 mm with net), weight 25.0 kg
The price has been reduced. 2024/3/6 sales price 3,500 yen. ※1 adapter is missing. FINSIX ultra-compact AC adapter for laptops. Compatible with many PCs by replacing the conversion plug. How about a companion to PC audio (Murakoshi Yoichi)
Maintenance information: 2022.1.19 Operation confirmed
Accessories: instruction manual, power cord, original box, 9 types of adapters
Main specifications: 65W 85g