※Shipping service. No. 148 Special Feature = The Appeal of Audio Components: The Power of the Latest 32 Models New-Generation Power Amps, Ashkenazi “Half a Century of Entrusting Impressions to Discs,” Proposals Living Room Audio Recommendations, Series: A Place with the Best Sound Music in Your Room/Murakami Haruki/2003.10.15 issue. Since the photograph is a sample, the actual item may be broken or there may be markings etc.
※Shipping service. Special Feature No. 12 = Separate Amp Scramble Test/Invitation to Tube Amplifiers/New Face Premain Amps What to Choose/Advocates to Perfectly Use Amps, etc. S54.4.1 issued
The price has been reduced. 2024/3/6 sales price 3,500 yen. ※1 adapter is missing. FINSIX ultra-compact AC adapter for laptops. Compatible with many PCs by replacing the conversion plug. How about a companion to PC audio (Murakoshi Yoichi)
Maintenance information: 2022.1.19 Operation confirmed
Accessories: instruction manual, power cord, original box, 9 types of adapters
Main specifications: 65W 85g
The disposal price has been reduced. Member prices are not applicable. 2024/9/23 sales price 22,000 yen*The edge has been replaced with a urethane edge. Both midrange center caps have dents. There is no problem with the sound, but it will be handed over as is. Diamond Tone's standard 3-way speaker made a name for itself as a gateway to audio success at the time. The overall balance is good and the sense of volume in the low frequencies is sufficient. You can enjoy all genres of music. The DIATONE batch of saran nets is missing, and there are a few saran net holes. There is a slight veneer crease in the corner on the back of the speaker. Serial 13541/13542 (Yasuhito Koshihama)
Maintenance information: 2024.9.23 storefront operation confirmed (sweep check OK)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed, bookshelf type, anti-magnetic type, impedance, 6 ohms, playback frequency band, 32 Hz to 32,000 Hz, sound pressure 91 dB, crossover frequency, 600 Hz/4,000 Hz, maximum input 150 W, W380 x H695 x D 295 mm (330 mm with net), weight 25.0 kg
The price has been drastically reduced. 2024/11/26 sales price 22,000 yen. *The bolt that stops the spike no longer rotates once, but this is the current situation. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: spikes
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
The price has been reduced. 2024/11/30 sales price 69,800 yen Marantz small pre-main amplifier with built-in USB DAC. It was also developed in parallel with the new flagship Primaine “PM-10,” and at a reasonable price, it has a sound that shows a glimpse of that. I also recommend this one for those starting out with serious audio. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2024.11.30 (Sound output operation confirmed up to PCM384 kHz/DSD 11.2 MHz)
Accessories: remote control, power cable, manual, original box
Main specifications: USB input PCM384 kHz/DSD 11.2 MHz rated output 35W+35W (8Ω) dynamic power 70W+70W (4Ω) input terminal/USB-B x 1, USB-A (front) x 1, coaxial digital x 1, optical digital x 2, analog x 2, output terminal/headphone x 1, subwoofer x 1, W304 x H107 x D352 mm 5.8 kg
※Since there is no manufacturer, there is no guarantee. CSE isolation regulator. The output is 60Hz/100V. PSE standard product. It makes a clean sound with miscellaneous notes removed. There are small wounds and dullness (Daiki Goto)
Maintenance information: 2024.12.4 storefront operation confirmed
Accessories: power cable
Main specifications: rated output 50W output voltage 100V output frequency 60Hz W217 × H59 × D379 mm weight 5 kg
Fully equipped with accessories such as 3 types of weights, 2 types of subweights, and 3 types of arm pipes! Oil dump system with static balance. There is no impression that arms are high in recent years, and they play well-balanced music in the mid to low range with a sense of stability, and there are speckled dullness and discoloration in places (Kojima Yosuke)
Maintenance information: 2024.12.6 continuity, movable part operation confirmed
Accessories: instruction manual, 3 weights, 2 sub-weights, 3 arm pipes (1 S-shaped arm/2 straight arms), template, cartridge fixing screws, phono cable
Main specifications: static balance type, total length 333 mm, effective length 237 mm, overhang 15 mm, needle pressure adjustment 0 to 5 g (0.25 g steps), compatible cartridge, dead weight, 14 to 33 g, arm base, mounting hole diameter 40 mm
This is an RME USB audio interface. Equipped with a 192 kHz AD/DA converter and 2 high-definition microphone preamps! It is also equipped with a 200MHz SteadyClock, which also suppresses jitter peculiar to digital. Digital input/output, headphone terminals, and TRS unbalanced terminals are built into the main unit, and since they are compatible with USB bus power, minimal system construction is possible (Tamura Eiji)
Maintenance information: 2024.12.6 operation confirmed
Accessories: case, instruction manual, connection cable*Driver CD missing
Main specifications: analog input/XLR x 2 analog output: /XLR x 2 TRS phone x 1 digital input/optical terminal x 1 digital output/optical terminal x 1 W100 x H25 x D160 mm approx. 500 g
Outlet-type noise reduction system. It reduces noise components on indoor wiring just by plugging it into an electrical outlet. It is effective not only for audio but also for visual devices. Dullness and a feeling of use can be seen (Kanai Hidetsugu)
Maintenance information: 2024.12.2 continuity confirmed
Accessories: original box
Main specifications: W43 x H26 x D79 mm weight 80 g
Outlet-type noise reduction system. It reduces noise components on indoor wiring just by plugging it into an electrical outlet. It is effective not only for audio but also for visual devices. Dullness and a feeling of use can be seen (Kanai Hidetsugu)
Maintenance information: 2024.12.2 continuity confirmed
Accessories: original box
Main specifications: W43 x H26 x D79 mm weight 80 g
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. (FUJISAWA KOSHI)
Maintenance information: 2024.12.8 continuity confirmed
Accessories: No accessories
*Since there is no manufacturer, it will be sold as is. PSE certified product. An isolation regulator that once rectifies AC to DC and creates 60 Hz. Noise removal capability has been greatly improved compared to all models, contributing to leveling up your system. Recommended for front-end devices such as CD players and preamps. The exterior, dullness, small scratches, and a feeling of use can be seen (Sasaki Shota)
Maintenance information: 2024.12.9 operation confirmed
Accessories: power cable, manual
Main specifications: 2 output outlets, output 100V/100W, output frequency 60 Hz, input voltage range 90 to 110 V, W158 x H166 x D365 mm, weight 4.0 kg
Details such as polishing all switches and volume disassembly contacts have been maintained. A pre-main amplifier using Lux's unique duo beta circuit. The overall sound quality is flat and thick, and I have the impression that the range is wider and easier to listen to compared to models from the 70s. You can also feel a sufficient sense of volume, and it develops a sound that makes you relax and unwind. There is a small scratch on the wood cab (Oikawa Tetsuji)
Maintenance information: 2024.10.31 Maintained (all switches and volume disassembly contacts polished. Some of the internal circuit capacitors were replaced with high quality audio, so the rest were also replaced. (I/O pin jack polish)
Accessories: copy of instruction manual
Main specifications: effective output 70W+70W (8Ω, both channel operation, 20Hz to 20kHz) phono MM/MC power consumption 250W dimensions W466 x H145 x D333 mm weight 12 kg
Maintained! This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.12.10 maintained (pinch roller plunger disassembly and maintenance, grease up, solenoid disassembly and maintenance, capstan belt replacement, flywheel disassembly and cleaning, capstan motor internal cleaning, bearing part, grease up and lubrication tape speed adjustment, tape tension adjustment, brake adjustment, tape path system cleaning and adjustment, rotating bearing washer replacement head demagnetization and pinch roller polishing , control photo interpreter cleaning, direction switch drive mechanism adjustment, control board repair, audio board print solder repair, various cleaning, contact restoration processing, recording and playback calibration, direction switch disassembly and cleaning)
Accessories: clamper, instruction manual (copy)
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
Audio-Technica connectable cartridge capsule. 3 can be stored while the headshell is attached. The exterior is dull and has a feeling of use (Ryo Mizusaki)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g