Pioneer DSD compatible network player. Now that production has been discontinued, Pioneer's last premium network player has become even more popular. We have carefully selected high quality parts such as analog and digital independent power twin transformers, and high-performance twin DACs compatible with 384 kHz 32 bits. Delicate, three-dimensional sound suitable for the high-resolution era has been obtained. The exterior is slightly dull (Oikawa Tetsuji)
Maintenance information: 2025.6.17 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: DSD 11.2 MHz for both network and USB (in the case of a Mac, DSD cannot be used with USB. DSD does not work even after installing the driver. For network transmission, DSD playback is OK) PCM384 kHz/32 bit compatible analog output/RCA1 system, 1 balanced (XLR3) digital input/optical digital input 1 system, 1 coaxial digital input system (gold plated), 1 USB B (rear) system (for USB DAC function), 1 USB A (front/rear) USB memory system (DSD, FLAC, WAV, MP3, WMA, AIFF, ALAC), external USB hard disk 1 system (DSD, FLAC, WAV, MP3, WMA, AIFF, ALAC) digital output/1 optical digital output, 1 coaxial digital output (RCA) system (gold plated) network terminal LAN (100base-TX/10base-T) wireless LAN (IEEE802.11 a/b/g/n compliant)
Phono cable uses a conductor that is a hybrid of 1.2m 5PIN → high purity oxygen-free copper centered on RCA specification ultra-high purity 6N copper. It is a model that incorporates various technologies in order to eliminate the ultra-fine low output power loss of MC cartridges as much as possible. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2025.6.17 continuity confirmed
Accessories: No accessories
Genuine Electri product with original box This is a first-watt power amplifier SIT1 from Nelson Pass's handmade brand. A single-ended power amplifier for SIT devices with a characteristic curve very similar to a triode vacuum tube. It has a small output with a 10W (8Ω) gain of 18dB, but it is Class A operation, and the sound produced is pure itself. I have the impression that it is a completely naked sound, unclothed. It is a rare power amplifier that seems to have thrown a stone in the audio industry in recent years, where sophisticated sounds have flooded in, with a unique sound. A small crack can be seen in the meter window on one side. *There is an XLR terminal, but it is not an input terminal. The only input terminal is RCA. Please be careful. There is a scratch on the top plate (Oikawa Tetsuji)
Maintenance information: 2025.6.17 operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: gain 18dB output 10W (8Ω) input impedance 10kΩ/100kΩ switching power consumption 200W operating temperature 55°C size W430 x H143 x D400 mm weight 13.14 kg
*There will be a slight popping sound when the initial protection is removed. The woofer moves a lot when the power is turned off, but this is a product specification. Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Takasaki Atsushi)
Maintenance information: 2024.5.31 Maintained (battery replacement and board pattern correction due to liquid leakage in function memory batteries. (Replacement of the extended shaft flexible joint Assy because the VR shaft is long)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
RCA cable, 1.0 m pair, hybrid 2-core shield structure of 7N copper and 6N copper, regardless of genre, the tuning that makes each sound have a core makes a good impression. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
RCA cable 1.0 m pair, a cable unique to orthophones that pursues sound quality that is neither 7N nor 8N while taking a 7N/8N high-purity hybrid conductor structure. It is characterized by delicate and flexible expressions. In addition to the exterior and the fact that the plug seems to have come off, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
It is a model commemorating friendship with WADIA in the United States, and WADIA is in charge of the D/A conversion section and analog board. It has a unique character that is different from other domestic CD players, and the high frequency stretches smoothly and you can listen to clear sound. The exterior is dull and has a feeling of use. There is paint deterioration on the tray part (Hiura Katsuji)
Maintenance information: 2025.6.16 Manufacturer maintenance completed (CD mechanical parts have been replaced. Mechanical ASSY disassembly/cleaning/lubrication clamper mechanism partial disassembly/rework correction. Each connector part was reworked, corrected, and repaired. Inspection of each part, electrical adjustment, inspection, and operation confirmation. Laser pickup ASSY cleaning/adjustment carried out. Turntable ASSY reworked, corrected, and repaired.)
Accessories: Remote control instruction manual, power cable, spike holder
Main specifications: analog output terminal, 1 RCA and XLR system each, equipped with a VRDS (CMK3) mechanism, W465 x H157 x D390 mm, 14.5 kg
※Since red paint sticks to the exterior, it is inexpensive. 1.25m pair of RCA cables with two shields for each wire, non-twist construction The inductance component is lowered by adopting non-twisted conductors arranged in parallel without twisting the conductors, and it is an ideal model based on the company's design policy, such as minimizing the conduction sheath and earth loop. The separator tube is loose and easy to remove (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
Phono cable uses 1.5m RCA-RCA pure silver conductor and SME gold-plated plug. This is an easy-to-use PHONO cable without any quirks. A rubber-like tube is attached to the plug part on one side, and there is dirt and dullness on the exterior (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
RCA cable 1.0 m pair, a cable unique to orthophones that pursues sound quality that is neither 7N nor 8N while taking a 7N/8N high-purity hybrid conductor structure. It is characterized by delicate and flexible expressions (Kanai Hidetsugu)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
1.25m pair of RCA cables with two shields for each wire, non-twist construction The inductance component is lowered by adopting non-twisted conductors arranged in parallel without twisting the conductors, and it is an ideal model based on the company's design policy, such as minimizing the conduction sheath and earth loop. The separator tube is loose and easy to remove (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10 (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
1.25m pair of RCA cables with two shields for each wire, non-twist construction The inductance component is lowered by adopting non-twisted conductors arranged in parallel without twisting the conductors, and it is an ideal model based on the company's design policy, such as minimizing the conduction sheath and earth loop. The separator tube is loose and easy to remove (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10 (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10 (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
Phono Cable 5p-RCA1.5m The popular tonearm cable is now in stock. The sound is neutral and has a sufficient amount of information, and it is a cable that can be used safely. There is light stickiness (Murakoshi Yoichi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: none
The price has been drastically reduced. 2025/6/13 sales price 398,000 yen Maintained! EAR has a bewitching tone and a unique presence. It is an amplifier with a high degree of perfection, and has clear, fresh expressive power and a gentle tone typical of a tube amp, and has excellent spatial expression. The luster of vocal music and string music is unrivaled. There are fine line marks and dullness on the front panel (Kojima Yosuke)
Maintenance information: 2025.2.1 Maintained (2 EL519 output tubes were defective, replaced with 2 40KG6A). The heater circuit was changed to 6,3V to 40V. Replace the fuse (6.3A) due to a broken wire. Contact cleaning due to poor volume contact. Check the operating voltage of each part. Other dirt cleaning and maintenance completed)
Accessories: power cable
Main Specifications: Maximum output: 32W x 2 (8Ω) 64W (8Ω) mono output impedance: 4Ω, 8Ω Frequency characteristics: 20Hz to 20kHz Input sensitivity: 500mV Input terminals: RCA1 system, 1 XLR balance system W400 x D420 x H150 mm 32 kg
Maintained! TVA-1 is a famous British vacuum tube power amplifier. Equipped with a sturdy, heavy transformer, this is reflected in sound quality. The sound quality is thick and has good extrusion, and the driving power is off par. You can enjoy the attractive vacuum tube sound with the tenacity of the mid-range and the bright mid-high range. Fine paint peeling can be seen. Serial 3025 (Fujisawa Yukishi)
Maintenance information: 2025.6.12 Maintained (power switch and RCA jack replaced. Right channel 2nd stage vacuum tube replacement. Spark killer replacement. Damaged part of anti-vibration rubber replaced. Vacuum tube pin cleaning Chassis curvature correction. Solder correction. Bias check. Output audio check. (The interior and exterior have been cleaned.)
Accessories: bonnet
Main specifications: 70W+70W W457 x H191 x D279 mm 38.1 kg
Tubular premain amplifier using the popular KT88. While there are many current tube amplifiers with good sharpness and high resolution, it reproduces the relaxed, plump sound typical of tube amplifiers. The stylish design is also excellent. The exterior is in a state where there is a feeling of use such as dullness over time. Serial 16041397 (Tomonori Asaine)
Maintenance information: 2025.6.12 operation confirmed
Accessories: Power cable instruction manual copy original box
Main specifications: AB grade push pull 45W+45W vacuum tube KT88 x 4, 12 AU7 x 2, 12AX7 x 1 headphone terminal equipped, input RCA4 system, compatible with 6 to 8 ohms, W330 x D280 x H150 mm, 15 kg
*Tobacco smell, stains, and stains remain. Phono cable 1.2m 5PIN → RCA This MIZUNOSEI series was developed to reduce the effects of vibration and electromagnetic waves as much as possible. It is a phono cable that expresses a wide sound field space with high transparency. Serial 203781 (Fujisawa Yukishi)
Maintenance information: 2025.6.12 continuity confirmed
Accessories: No accessories
Maintenance has been completed by the manufacturer, including pickup replacement! The core model for Marantz SACD players. Although it is an entry model, it has a high S/N feel and delicate sound quality typical of the company's products. It is an attractive player with a mid-high range with a sense of particle. There are some line scratches on the top plate. Serial 20050831005046 (Fujisawa Yukishi)
Maintenance information: 2025.6.12 manufacturer maintained (pickup, loading belt replacement. SACD in-board capacitor mounting. Each part was inspected and operation tested.)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: SACD/CD player, 1 analog output system (RCA), 2 digital output systems (coaxial x 1, optical x 1), digital filter, switch to 3 modes, W440 x H123 x D419 mm, 13.5 kg