Phono cable 0.5m RCA-RCA earth missing The sound quality is thick and powerful, typical of Audiocraft. It has unmistakably neutral properties. You can see the exterior, dullness, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity confirmed
Accessories: none
D terminal/RCA-D terminal/RCA cable 1.0 m There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: RCA operation checked, D terminal unchecked
Accessories: original box
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
※The sound output has been confirmed, but since it is not compatible with the manufacturer, it will be handed over as is. It is a cost-effective USB DAC with a built-in headphone amplifier. The DAC is equipped with 2 8-channel DACs “ES9016” made by ESS. The headphone amplifier is also compatible with 4-pin and 3-pin XLR terminals (balanced drive). There are plenty of connection terminals, so you can connect to a PC, CD, TV, etc. The clear and tight sound does not choose any music genre. Serial ODID0019101JP (Mizushima Itsuro)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (damaged), power cable
Main specifications: sampling frequency/USB input (PCM) 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit) USB input (DSD) 2.8 MHz, 5.6 MHz COAXIAL/OPTICAL/AES/EBU input 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit) digital input USB 1 system, COAXIAL2 system, OPTICAL2 system, AES/EBU (XLR3) 1 system analog output unbalance (RCA) 1 system balanced output (XLR3) 1 system (with fixed level/variable switching, with phase switching function) headphone output imbalance (STD) 1 system, balance (XLR3) 1 system, balance ( XLR4) 1 system W296×H101×D271mm 6.3 kg
Maintained in 2018. TVA-1 is a famous British vacuum tube power amplifier. Equipped with a sturdy, heavy transformer, this is reflected in sound quality. The sound quality is thick and has good extrusion, and the driving power is off par. You can enjoy the attractive vacuum tube sound with the tenacity of the mid-range and the bright mid-high range. There is dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: Maintained on 2018/3/31 (The capacitor was replaced, the looseness of the speaker terminals was increased and tightened, and the installation was corrected. The vacuum tube socket was replaced due to poor contact. The bias current for each output tube has been adjusted. The power supply and block capacitor connections have been corrected. There was poor contact with the input RCA pin terminal, so I replaced it.)
Accessories: none
Main specifications: 70W+70W W457 x H191 x D279 mm 38.1 kg
The first stage is all 4 PASVANE WE310A! This is Sun Valley's Western 91 300B single amp. Anyway, it's an amplifier that clearly expresses even the afterglow, and it has enough power. Although it has an output of 8W+8W, this model is extremely practical and of high quality. It is a power amplifier with a balanced, glossy tone with no excesses or deficiencies from low to high frequencies. There is a scratch on the back of the exterior. Serial 63113 (Yonejima Satoshi)
Maintenance information: 2021.6.13 manufacturer maintained (all metal fittings on the 310A socket have been increased and tightened, looseness of vacuum tube pins and socket fittings fixed) 2020.8.7 manufacturer maintained (as preventive maintenance, hot bond treatment to prevent disconnection is performed on the 310 grid cap solder part, and residual noise, gain, frequency characteristics, and voltage of each part are measured to confirm that there are no abnormalities)
Accessories: power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 (Elehamo) 310A x 4 (PSVANE) 5R4GY ✕ 1 (RCA) W400 x H210 x D300 mm weight 23 kg
A line preamp that uses 2 WE 310A driver tubes and 1 Golden Dragon 5U4G rectifier tube. The rich tone has a strong personality reminiscent of foreign products, and the amount of information is also attractive. It is a compact preamp that has a relatively wide range and is fully compatible with modern speakers. The exterior is slightly dull. (YONEJIMA Satoshi)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: power cord
Main specifications: RCA/5R4GY x 1 WE/310A x 2 W330 x H215 x D250 mm 12.74 kg (actual measurement)
The price has been drastically reduced. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It is a natural, highly transparent sound quality with few SAEC habits (Shota Sasaki)
Maintenance information: 2024.4.21 sound output operation confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It is a natural, highly transparent sound quality with few SAEC habits (Shota Sasaki)
Maintenance information: 2024.4.21 sound output operation confirmed
Accessories: none
The price has been reduced! 2024/4/20 sales price 19,800 yen RCA cable 1.2m pair LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It is a deep bass with natural sound quality, high resolution, and deep carving (Tomoho Asaine)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/20 sales price 19,800 yen RCA cable 1.2m pair LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It is a deep bass with natural sound quality, high resolution, and deep carving (Tomoho Asaine)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2024/4/17 sales price 498,000 yen The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is a masterpiece that gives off a unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. The exterior has a feeling of use such as dullness and small scratches. Serial 1298721 (Hiroki Aso)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cable
Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
Standard plug to RCA cable 2.0m used for transmission from a headphone output such as a deck to an RCA input such as an amplifier (Yoichi Murakoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Comes with original box! An English QED cable based on a smooth, natural tone, 1.0m pair of RCA cables. It is a character that makes music resonate comfortably with thick sound quality. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: original box
Stereo mini jack to RCA male conversion cable 0.2 m has an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
Maintained! DENON's vintage pre-main. It has a sense of transparency, three-dimensionality, and sound field that you wouldn't think of an amp from the 70s. Also, be sure to try out the deep and tasteful tuning that you can never enjoy with the company's current models. The cost performance is high! You can see a feeling of use such as appearance, dullness, stains, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.24 maintenance completed (switch disassembly contact polishing, contact cleaner application) 2013.2.19 maintained (54 deteriorated transistors and capacitors replaced/use of nichikon MUSE, etc., RCA terminal replacement, speaker terminal replacement, input/output waveform confirmation, sound output test OK)
Accessories: copy of instruction manual
Main specifications: pre, main separable 32W+32W (8Ω) PHONO2 system (mm) W370 x H141 x D310 mm 8 kg
RCA relay plug Mono Lou Mono Pairs Adopts a metal body. You can see the exterior, disappearing characters, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/11 sales price 99,800 yen This is the ultimate version of the P-1. It is a pure A grade specification, which is rare for a headphone amplifier, and you can enjoy more detailed and clear playback sound. There is a thin line scratch on the top plate and a small scratch on the upper front, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.1.11 Sound output operation confirmed
Accessories: copy of manual, power cable
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
The price has been reduced. 2024/4/2 sales price 36,800 yen ※48kHz, de-emission lamps are out of stock. The luminescence can be confirmed, so there is no problem when using it. It is a convenient D/A converter with volume. The mid and low frequencies are thick, and the range is moderate but it is characterized by analog-like sound quality. It effectively gently relaxes hard sound CD players. The exterior has dullness, small scratches, and missing characters in part 1 (Oikawa Tetsuji)
Maintenance information: 2024.4.2 operation confirmed (44.1/48/96 kHz sound output OK)
Accessories: none
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 448,000 yen Maintained in 2022/7! Comes with a hood! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior has stains, stains, paint peeling, etc. Serial 2417 (Tomoho Asaine)
Maintenance information: 2022.7.13 Maintained (replacement of 2 vacuum tubes 6CA7 deteriorated, 2 electrolytic capacitors → block capacitors replaced with 47 μF x 2, resistance 1W domestically produced → replaced with USA-made, bottom leg deterioration replacement/vacuum tube socket and RCA jack re-caulking repair. *Other operation checks have been performed (measured at 32 to 43 W SP: 8 Ω at rated output AC 100 to 117 V)
2021.3.28 Maintained (vacuum tube socket partially loosened, re-caulking repair, other RCA jack re-caulking repairs and AC BAL. /DC BAL. /BIAS realignment implemented. Rated output AC 100 to 117 V measured at 32 to 41 W SP: 8 Ω) Maintained on 2015.1.23 (2 VT6BH6 noisy replacements · block.c40/20/20 μf deterioration exchange and external coating · R1/2W 100Ω combustion exchange · Fuse3A Slowblow ⇒ 2.5A SlowBlow replacement with original · EL.C10μF ⇒ 20 μF original replacement 2 pieces ※ other parts check ( EL.c has been added to Block.c2 by another company. Other EL.C has been replaced by another company))
Accessories: none
Main specifications: vacuum tube EL34, 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
Maintained! It is a model designed by US Marantz and manufactured in Japan. It develops an American sound with a dry air feel and strong push. The design is also a vintage control amplifier with a taste unique to the 70s. Externally, there are scratches and threads on the cabinet. *Some RCA terminals and inlets have been changed. Serial 7237 (Tamura Eiji)
Maintenance Information: 2024.4.13 Maintained (Mode selector stopper mechanism fixed. Electrolytic capacitors and film capacitors have been replaced. The speaker terminal (red and black type) has been processed and replaced. The end of RCA TAPE was replaced due to discoloration. Each input/output operation was checked.)
Accessories: power cable
Main specifications: Line input 5 systems, phono (MM), 2 systems, pre-out, 1 system, W391 x H146 x D222 mm, 7.3 kg
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
The deteriorated vacuum tubes etc. were replaced in 2023 and full maintenance has been completed! The vintage MC30 is still loved today, half a century later. The sharp high range and thick low to mid range sound are nothing short of wonderful. Since the left and right sides come out clearly without interference, you can feel a better sense of localization than a stereo machine. The good separation unique to mono amplifiers stands out, and it can play everything from jazz to classical music well (Murakoshi Yoichi)
Maintenance information: 2023.6.10 maintained (vacuum tube socket re-caulking repair, vacuum tube 12AX7 replacement, selenium countermeasure diode addition, 2W and 1/2W resistor replacement, HUM ADJ. readjustment/RCA jack re-caulking repair, operation check (measured at 25-38W SP:8Ω with rated output AC100-117 V).)
2012.6.12 Maintained (Capacitor Exchange/Mallory x 2, Sprag x 2, Europe x 2, Black Beauty x 10, Cornell x 2, Vacuum Tube, Partially Replaced with Good, Used, Silicon Rectifier, Vacuum Tube Pin, Rust Polishing and Socket Electrode Sack, Bolum, Sliding Surface Cleaning, RCA Pin Jack Cleaning, Each Voltage, Operation Inspection)
Accessories: none
Main specifications: rated output 30W, input sensitivity 0.5V vacuum tubes 6L6GC x 2, 5U4 x 1, 12AX7 x 2, 12BH7 x 1, 12AU7 x 1, W356 x H203 x D203 mm, weight 15.8 kg
The price has been drastically reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
RCA cable 1.0 m pair with 24K gold-plated turbine plug and split center pin specification, 2-core structure, sheath resistant to aging, and Duraflex jacket. The exterior has a feeling of use and dullness (Tomoho Asae)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Genuine Rin Japan A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
Jack (female) to RCA cable 2.0m pair plug are both ends made by Neutrick and are originally microphone cables, so sound loss is good. There is an appearance, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.9.16 Conductivity Confirmed
Accessories: none
Main specifications: Electromagnetic shielded microphone cable, 4 cores, outer diameter: 6.0 mm
The price has been reduced! 2024/4/18 sales price 7,500 yen RCA cable, 1.5 m pair, rhodium plated plug, accuphase, genuine OFC series cable, cable with excellent corrosion resistance, looks like a high-purity OFC Ritz wire, and it sounds supple at the same time as extrusion in the mid to low range. The exterior has a feeling of use such as rubbing, dirt, and bending habits on the sheath (Asaine Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 2-core shield structure, rhodium-plated plug suppresses sound dramatization and reproduces the individuality of the amplifier and player as it is. The plug shell is dull and discolored a lot, and the LR coloring is deteriorated and damaged, so it is inexpensive (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/4/24 sales price 1,180,000 yen genuine Rin Japan product. DS (digital streaming), which has now become mainstream, is named with an acronym such as M (music, movie, multi-source, mobile, multi-user), etc., and not only reproduces PC sound sources via a network, but also becomes a controller that manipulates various sound sources. While it functions as a network player, it has various functions that support everything from analog input to digital input. The exterior has insulator marks on the top plate. Serial 1374093 (Yonejima Satoshi)
Maintenance information: 2024.2.13 operation confirmed (Software Ver. 4.104.518)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: Support files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA compatible sampling frequency: 44.1 to 192 kHz Compatible bits: 16-24 bit Input terminals: Ethernet, 1 XLR balanced input system, 1 Spdif coaxial digital input system, 2 Tos optical digital input systems, 3 HDMI input systems Output terminals: 1 XLR balanced output system, 1 RCA unbalanced output system, HDMI Output (pass-through) 1 system, equipped with EXAKT LINK 2 systems, W350 x H60 x D344 mm, 10 kg