*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
※The unit has noticeable mold spots, so it is inexpensive. It is a model equipped with a sound diffuser that can adjust directivity characteristics to the listening position while maintaining the quality and ease of use of the 101 series. On the exterior, there are scratches and mold on the unit. Serial 006855/006856 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net, diffuser
Main specifications: 11.5cm full range anti-magnetic type maximum output 150W impedance 6Ω dimensions W232 × H154 × D162 mm weight 2.2 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
Speaker cable 2.5 m pair terminal uses unprocessed Acrolink traditional high-purity stress-free 6N 99.99997% Cu. It has high speed, high response, and natural sound quality that was unattainable with the old model 6N-S1051. There are stains and threads on the sheath (Tamura Eiji)
Maintenance information: 2024.4.3 continuity confirmed
Accessories: none
It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
※It has a cigarette smell, so it's cheap. High performance headphone amplifier with topping. It is compatible with a variety of headphones, and is an inexpensive yet cost-effective one. The size is also compact, so I recommend it. The exterior is dull. Serial 2101691163 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 3-stage gain setting, built-in NFCA circuit, dynamic range 145 dB, W222 x H45 x D160 mm
※It has a cigarette smell, so it's cheap. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Technica Hi-CP Cartridges The inside of Technica's MC needle makes a clear, firm sound. There are no particular bends. Serial 304 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: needle cover
Main specifications: MC type, output voltage 0.4 mV, oval needle pressure 1.5 g (1.2 to 1.8), impedance 17 ohms, dual moving coil system, dead weight 6.8 g
Dry record cleaner made with premium velvet. The easy-to-hold shape allows you to clean records effectively. There is dullness and a feeling of use (Tamura Eiji)
Accessories: none
A high-precision level gauge that is essential for leveling players. This is a long-selling model with an aluminum body (Tamura Eiji)
Accessories: none
Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum dead weight 12 g (actual measurement)
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Tamura Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum 15g
This is a rare Audio-Technica sampling rate converter. The output can be changed to 32/44.1/48khz. It's an item that you can enjoy in a variety of ways, such as recording and playback. Externally, there is a scratch on the top plate. Serial 644035 (Tamura Eiji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: input (32/44.1/48 kHz) 3 systems: optical/coaxial output (32/44.1/48 kHz) 1 system: optical/coaxial
※Since it is cheap, it will be handed over as is. Ishino Lab's Master Series power amplifier designed by Mr. Hirano. A class amplifier equipped with a matching transformer. It has a compact design and seems to be easy to use. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable
Main specifications: 1W+1W (8Ω) 4-8Ω 20-20khz W250 × H85 × D263mm weight 3.0 kg
Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defects have been fixed. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/3 sales price 218,000 yen Maintenance has been completed. It is a hidden popular model as the successor to the C26. It is an amplifier from the golden age of McKinn that is highly popular with music fans, with a sound reminiscent of a rich, thick vacuum tube sound. It makes vintage speakers sound intense. The exterior has paint floats, rust spots, etc. Serial BV2290 (Tamura Eiji)
Maintenance information: 2024.4.3 maintained (input selector, other contact cleaning. Balancer volume contact cleaning. Electrolytic capacitor replacement. RCA terminal replacement. The power supply voltage was changed to 100V compatible. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: input PHONO 1 · 2, AUX 1 · 2, TUNER, TAPE 1 · 2 W435 × H188 × D395 mm 11.8 kg
Ishino Lab's control amplifier that uses a rectifier tube for the power supply unit. Although it is a small and long body, it is a car with excellent cost performance, such as separating the power supply part and installing an MC transformer compatible with a wide range of cartridges. The output is also equipped with RCA balance. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 2 phono systems, LINE1 system amplifier part: W250 x H75 x D230 mm weight 2.2 g power supply unit: W150 x H75 x D230 mm weight 2.8 kg
The price has been reduced! 2024/4/3 sales price 15,000 yen A rare 1,400Hz frequency board is in stock! It seems to be an Accuphase special order item. A crossover board that can be used for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: No accessories
Main specifications: 1400 Hz attenuation slope 12 dB/18 dB switchable
The price has been reduced! 2024/4/3 sales price 15,000 yen This is a crossover board crossover frequency of 300 Hz for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: original box
Main specifications: 300Hz attenuation slope 12dB/18dB switchable
Mini plug to stereo standard plug conversion cable It is a model using OFC as a wire rod. (Eiji Tamura)
Maintenance information: 2022.1.5 continuity confirmed
Accessories: original box
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
*Currently sold. 120V specification. CROWN commercial power amplifier. It features driving power unique to professional use that lifts straight. The high braking power at high volume fully demonstrates the quality of a professional device. The exterior is dull. *There are no fixing brackets for mounting racks. Also, the AC plug has been replaced. Serial 8001294201 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: none
Main specifications: output 25W+25W (8Ω) 120V specification natural air cooling method W483 × H45 × D213 mm 4.5 kg
※It has a cigarette smell, so it's cheap. Since it is 120V specification for commercial use, it will be handed over as is. A compact commercial power amplifier that is highly regarded as a professional studio monitor amplifier. The driving power that cannot be imagined from its size is truly the real thrill of a professional aircraft. The range is reasonable, but it is characterized by a sound image that does not lose sound even at high volumes. There are scratches on the exterior. Serial 8001337592 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 40W+40W (8Ω) W483 x H44.5 x D213 mm 4.5 kg
*Fully auto player with built-in phono equalizer from Denon currently sold. It is recommended for those who want to enjoy records casually without worrying about the location or for beginners. There are scratches on the exterior. Serial 0063373998 (Tamura Eiji)
Maintenance information: 2023.12.8 operation confirmed
Accessories: none
Main Specifications: Fully Auto Player Belt Drive Appropriate Needle Pressure 3.5g W360 ✕ H ✕ D370mm Weight 2.9 kg
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
RCA cable 1.0 m pair The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has a high resolution and is an exciting sound that comes out quickly. There is some discoloration on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Light and compact, stylish headphones from JVC. The sound has excellent sound insulation and is comfortable to listen to (Tamura Eiji)
Maintenance information: 2024.3.15 sweep check OK
Accessories: case
Main specifications: dynamic type 12 to 24,000 Hz 32 ohms 103 dB 66 g
※It has a cigarette smell, so it's cheap. Hi-Fi Man's planar drive headphones have high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
Output transformer sold 1 piece Primary: 5 kΩ Secondary: 6 Ω/600 Ω NFB W68 × H91 × D72 mm 1.28 kg (actual measurement, not including protrusions). From specifications, it seems to be a line output transformer. There are rust spots, scratches, and paint peeling in places (Kojima Yosuke)
Accessories: none
The price has been reduced. 2022/12/10 sales price 1,800 yen ELECOM HDMI Cable Premium HDMI Cable This is a premium HDMI cable that has been certified according to the standard. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Accessories: There are no accessories
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is moving slightly to the right (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: original box, needle cover
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/4/11 sales price 148,000 yen ※It is cheap because the condition is poor due to noticeable bumps and frayed saran nets. JBL 60th anniversary model. A tall boy who embodies a wide range of modern JBL sounds. It has a smooth, smooth tone, and is compatible with various genres without difficulty. Of course, you can also enjoy a sense of energy with a punch in the mid to low range. The exterior has blows, scratches, and fissures on Saran (Tamura Eiji)
Maintenance information: 2024.4.11 sweep test good
Accessories: saran net, spikes
Main specifications: 3 way 4 speakers 6Ω 90dB crossover frequency 2.5kHz, 8kHz W260 × H1,130 × D430 mm 35.6 kg
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
Vacuum tube preamp and buffer amplifier. You can enjoy the sound quality of the tube as a buffer amplifier by using or passing the volume control function depending on the device in the previous stage. Serial T11239 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: copy of instruction manual, AC adapter
Main specifications: High-end vacuum tube buffer amplifier and preamplifier (dip switch switching type) input impedance 1 MΩ (direct vacuum tube buffer) 100 kΩ (preamp volume control) W67 x H28 x D 175 mm weight 237 g
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
Maintained! It is a model designed by US Marantz and manufactured in Japan. It develops an American sound with a dry air feel and strong push. The design is also a vintage control amplifier with a taste unique to the 70s. Externally, there are scratches and threads on the cabinet. *Some RCA terminals and inlets have been changed. Serial 7237 (Tamura Eiji)
Maintenance Information: 2024.4.13 Maintained (Mode selector stopper mechanism fixed. Electrolytic capacitors and film capacitors have been replaced. The speaker terminal (red and black type) has been processed and replaced. The end of RCA TAPE was replaced due to discoloration. Each input/output operation was checked.)
Accessories: power cable
Main specifications: Line input 5 systems, phono (MM), 2 systems, pre-out, 1 system, W391 x H146 x D222 mm, 7.3 kg
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none