Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 46 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 48 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 46 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 48 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 52 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 42 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube direct heat triode tube, white base, made in Slovakia, measured value 76/70 (rejected value 58) with original box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
※1 bottle only. Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.4.23 Maintained (diaphragm installation adjustment, replacement of the following parts. DCR (54871, 5.7 ohm diaphragm, no scratches)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Genuine Rin Japan A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The exterior of the woofer mounting clamp, which seems to be a self-made set of 5, has variations in the cutting part, there are corrosion and mounting marks all over, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
※The sound output has been confirmed, but since it is not compatible with the manufacturer, it will be handed over as is. It is a cost-effective USB DAC with a built-in headphone amplifier. The DAC is equipped with 2 8-channel DACs “ES9016” made by ESS. The headphone amplifier is also compatible with 4-pin and 3-pin XLR terminals (balanced drive). There are plenty of connection terminals, so you can connect to a PC, CD, TV, etc. The clear and tight sound does not choose any music genre. Serial ODID0019101JP (Mizushima Itsuro)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (damaged), power cable
Main specifications: sampling frequency/USB input (PCM) 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit) USB input (DSD) 2.8 MHz, 5.6 MHz COAXIAL/OPTICAL/AES/EBU input 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit) digital input USB 1 system, COAXIAL2 system, OPTICAL2 system, AES/EBU (XLR3) 1 system analog output unbalance (RCA) 1 system balanced output (XLR3) 1 system (with fixed level/variable switching, with phase switching function) headphone output imbalance (STD) 1 system, balance (XLR3) 1 system, balance ( XLR4) 1 system W296×H101×D271mm 6.3 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi)
Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω)
Accessories: No accessories
Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The price has been reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The price has been reduced. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
2022/5/18 Maintenance completed. An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.5.18 maintenance (1/4 W resistor added, AC cord replacement/side lamp replacement, electrolytic capacitor 100 μF replacement, oil capacitor 0.01 μF replacement, electrolytic capacitor 40 μF replacement, block capacitor 40/20/1000 μF replacement, electrolytic capacitor 1000 μF addition, resistance 1W and 1/2 W replacement, vacuum tube socket and RCA jack caulk repair . Operation has been checked with AC 100 to 117 V.)
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (output relay replacement, power amplifier circuit resistance replacement, power supply circuit capacitor replacement, tape selector, etc., switch disassembly, polishing grease application (input selector, power amplifier direct, source direct, reck-out, tone, loudness, muting switch), various volumes, switch cleaning, solder main part repair, pin jack polishing, interior and exterior inspection, cleaning, operation confirm)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
Maintained! This is a 907 series higher class premain amplifier. Not only is the sound thick and wide range, but it is also a deep and majestic sound with a sense of weight. The XR series during this period has particularly horsepower in the mid to low range, and it sounds briskly ROCK and JAZZ. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (main amplifier circuit transistor, adjustment volume exchange, output relay, headphone relay replacement, power supply circuit transistor replacement, input selector, etc., and application of polishing grease (power amplifier direct, source direct, reck-out, tape, loudness, subsonic, muting, processor switch), various volume cleaning, soldering (Repair, DC, bias adjustment, internal inspection and cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Equipped with HYPERα-X balance circuit, effective output 190 w+190 w dimensions W466 x H163 x D452 mm, weight 33 kg
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg
※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, mounting hardware
Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. The exterior has small scratches, dullness, and a feeling of use (Hiura Katsuji)
Maintenance information: 2020.9.7 maintenance completed (full arm disassembly, rewiring, arm bearing outer race cleaning, bearing ball replacement, oil lubrication, motor shaft oil lubrication, semi-fixed VR replacement for rotation adjustment, rotation adjustment implementation, needle pressure adjustment VR and operation SW disassembly, cleaning, auto sensor position adjustment, operation confirmation of each function, sound output check)
Accessories: M44G
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained. With a crossover of 7000 Hz, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. The exterior has been painted on the front due to scratches and signs of use. Serial 38620 39011 (Tomonori Asaine)
Maintenance Information: 2024.4.16 Maintained (8ohm Attenuator VR Screw Insulated Washer Parts Replacement)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The price has been reduced! 2024/4/21 sales price 398,000 yen This is an upgraded model of the DALI HELICON 800 that was highly evaluated as a classic-friendly speaker. The delicate, well-extended treble, and the sense of depth that comes out well in hole tones are a listening experience unique to high-end machines. The luxurious glossy wood cabinet is also attractive. The exterior is dull. Serial 7760048, 7760048 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: instruction manual, original box, jumper cable, spike, saran net
Main specifications: 4-way speaker system frequency response 31 Hz to 27,000 Hz crossover: 580 Hz, 3,000 Hz, 13,000 Hz 89.5 dB 4 ohms recommended amplifier output 50 to 400 W W300 x H1,130 x D539 mm 40 kg
The price has been drastically reduced. 2024/4/11 sale price 59,800 yen Aura line exclusive premain amplifier. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There is a slight feeling of use, such as a missing screw in the center of the back, scratches on the top plate, etc., and some lettering disappeared (Murakoshi Yoichi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: power cord, copy of instruction manual
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
Pair tube, made in England, 6L6G equivalent tube, military high reliability tube, smoke measurement value 40/36 (rejected value 25) with white box ※ pair is determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, made in England, 6L6G equivalent tube, military high reliability tube, smoke measurement value 46/42 (rejected value 25) with white box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, made in England, 6L6G equivalent tube, military high reliability tube, smoke measurement value 42/42 (rejected value 25) with white box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, made in England, 6L6G equivalent tube, military high reliability tube, smoke measurement value 42/40 (rejected value 25) with white box ※ pair is determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube metal brown base Russian dharma tube measured value 60/58 (rejected value 44) with white box, printing on one side often disappears ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube ambient heat beam tube made in America, measured value 42/40 (rejection value 25) with original box (the claws on one side of the box are missing) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, ambient heat beam tube, made in America, JAN measurement value 42/40 (rejected value 25) with white box ※Pairs are determined based on GM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube ambient heat beam output tube made in China lot: 97Z/97Z measured value 46/40 (rejected value 32) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube VT-115 equivalent tube, high durability tube, metal tube, tea base, measured value 46/44 (rejected value 25) with white box ※Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Pair tube VT-115 equivalent pipe metal tube measurement value 42/40 (rejected value 25) There is slight rust on the tube with white box*Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Pair tube VT-115 equivalent tube, high durability tube, metal tube, tea base, measured value 48/46 (rejected value 25) with white box ※Pairs are determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Single sale direct heat triode tube, made in Russia, white base, measured value 78 (rejected value 58) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, subthermal beam tube, made in China, seems to have been used in the company's power amplifiers, etc. Measured value 68/66 (rejected value 44) with replacement box*The pair is determined based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Maintained! John Carl's slim-design “flat preamp” is the first control amplifier equipped with an original module developed in-house. Thorough simplification and a straight, coined tone with carefully selected high quality parts are the model that became the basis for later Mark Levinson preamps. Serial 1306 (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (new power supply made inside the original power supply, Lch gain changeover switch replacement, volume gang error correction, function switch contact cleaning, specification inspection, various operation inspections) 2024.3.3.13 maintenance (various inspections, aging) 2023.10.27 maintenance (RCA terminal replacement, inspection adjustment)
Main specifications: 5 module phono (MM) compatible RCA input/output body size W482 x H60 x D195 mm (actual measurement) 4.2 kg (actual measurement)
A masterpiece tuner equipped with an 8-channel vari-controller. It was introduced to the world as the first pulse-counting unit developed by Trio ahead of the rest of the world, and it is a model with a reputation for sound quality. You can get a sense of satisfaction just by turning the heavy tuning knob. Serial 530245 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner, equipped with 8 vari-controllers, W440 x H154 x D393 mm, 11.5 kg
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. It's very slightly to the right. Serial 718026 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
The price has been drastically reduced! 2024/4/14 sales price 99,800 yen ※It is cheap because there are tar stains. The world's first Metamaterial-equipped speaker! Commonly known as MAT, it has a unique road structure, and is said to almost completely eliminate noise on the back of the TW, and it is an area where I feel surprised by its distortion reduction effect. A loudspeaker designed based on innovative sound technology. Please experience the clear tone of VOCAL's mid to high range. The exterior is dull all over, and there is dirt on the top plate. Serial LS50217926N11N2G/LS50218095N11N2G (Yonejima Satoshi)
Maintenance information: 2024.4.14 sweep test good
Accessories: No accessories
Main specifications: 2-way bass reflex, 5.25-inch UNI-Q driver adopted, frequency characteristics 47Hz-45kHz, 8Ω, 85dB, W200 x H302 x 280.5 mm, 7.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 79,800 yen Hi-Fi Hall first arrival! A compact and elegant DALI tall boy speaker with sharp low frequencies and clear midrange, and an airy treble range. The exterior has a scratch on the stand, a scratch on the side of the main unit, and a small scratch on the top plate. Serial 6255811 (Sato Wataru)
Maintenance information: 2024.4.2 sweep test is good
Accessories: instruction manual, spike, saran net
Main Specifications: Frequency Characteristics: 39~26kHz 88dB Impedance 4Ω Tweeter 29mm Soft Dome Midrange/Woofer 130mm/SMC Wood Fiber Cone Driver ✕ 2 Dimensions W162 ✕ D283 ✕ H830mm Weight 10.8 kg
The price has been reduced. 2024/3/12 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (The inside of the main unit was cleaned and the wall escutcheon cleaned. The dial transmission part has been corrected due to thread entanglement on the dial flywheel part. RF section tracking, meter instructions, and MPX detection have been adjusted. (Reworked and corrected due to poor contact (glare) in the output level volume)
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
The price has been reduced. 2024/4/5 sales price 99,800 yen Maintained! It is an impressive British Rogers compact speaker with a crisp grain and a sense of density. I was impressed by the fact that this speaker values analog flavor in a range with a sense of moderation without daring to be greedy, such as a sense of volume or scale in the low range. Serial 1247 (Asaine Tomoho)
Maintenance information: 2024.4.5 maintained (exterior cleaning/repair saran frame painting/net replacement woofer maintenance (edge softening treatment, center misalignment adjustment on one side))
(Detachable unit)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 2 speakers sealed bookshelf type 45W W190 x H302 x D162 mm 5.0 kg
The disposal price has been reduced. 2024/4/4 sales price 898,000 yen British original enclosure, equipped with 15 inch monitor gold! Refreshing York has regained its original tone through our refreshment maintenance. It is a speaker representing TANNOY that brings out the appeal of all kinds of sources. In particular, the beautiful, glossy sound in string and vocal music plays a sound that once you hear it, you won't be able to leave your ears (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/polishing/clear finish. Maintenance: net cleaning/fraying repair/repasting, sound-absorbing material removal. Unit maintenance: Magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor Gold 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 8 ohms size W597 x H1,070 x D375 mm
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C)
Accessories: none
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg