Stereo mini plug extension cable A stereo mini plug extension cable using a 3.0 m OFC conductor. Can be used to extend headphones, etc. (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
Audio-Technica model number unknown gold-plated conversion jack. The female side is well made, and the manufacturer's logo is also engraved. There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Video cable 1.5m 75Ω audio-technica video cable PCOCC conductors are used. The white rubber on the plug is missing, and there are tape marks (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
It is a headshell that combines magnesium alloy with anti-vibration material. Overhang and left/right tilt can be adjusted (Oikawa Tetsuji)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
It is a headshell that combines magnesium alloy with anti-vibration material. The overhang and left/right tilt can be adjusted. Lead wire is out of stock (Oikawa Tetsuji)
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
※The lead wire is out of stock. Audio-Technica headshell It is a classic model that is attractive for its high versatility. The exterior is dull and has a feeling of use (Daiki Goto)
Maintenance information: 2024.7.7 operation confirmed
Accessories: original box
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 continuity confirmed
Accessories: No accessories
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell. It is an attractive classic model with stable popularity and high versatility. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell It is a classic model that is attractive due to its stable popularity and high versatility (Sasaki Shota)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
The price has been reduced. 2024/8/18 sales price 3,000 yen. *Lead wire is missing. A classic shell made from machined aluminum blocks. I like it because of its sturdy construction and simple design. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Along with the MG-10, this headshell is popular. The overhang can be adjusted and the model is easy to use. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
Main specifications: dead weight 11g (actual measurement)
RCA cable 1.0 m pair is an inexpensive and easy to handle cable. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
Lightweight cartridge shell that was standard equipment on the AT-1009. It has a highly rigid 2-piece structure, and it is a convenient shell that makes it easy to adjust the overhang. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Key Specifications: Impact molded lightweight shell, dead weight 9g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Inexpensive because there are small scratches and corrosion. A classic headshell made of magnesium alloy with an attractive, unobtrusive sound. Overhang and left/right tilt adjustments are possible. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.16 continuity confirmed
Accessories: none
Main specifications: dead weight 10g
*Currently sold. microphone amplifier It is possible to pick up and amplify sound with an AV device without a microphone terminal. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: original box, power adapter, manual
Main specifications: W70 x H30 x D92 mm 160 g
Audio-Technica's classic shell. Uses die-cast aluminum. The overhang can be adjusted in 3 levels. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 13g
Audio-Technica's classic shell. Uses die-cast aluminum. 3 levels of overhang can be adjusted
Accessories: screws
Main specifications: Die-cast aluminum, dead weight 13g
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Finger hooks are inexpensive because they are replacements. Technica die-cast aluminum headshell. Although it is compact in size, it has high rigidity. Overhang and left/right tilt adjustments are possible. There are only different types of white lead wires. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight 14g (actual measurement)
Technica die-cast aluminum headshell Despite its compact size, it has high rigidity. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: Die-cast aluminum, weight approx. 13g
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Sasaki Shota)
Maintenance information: 2024.7.29 continuity confirmed
Accessories: nothing
Main specifications: aluminum 15g
African paddock (solid wood) is used for the housing. It lets you hear deep bass and clear mid- to high-pitched sounds (Oikawa Tetsuji)
Maintenance information: 2024.8.18 Operation confirmed
Accessories: pouch
Main specifications: sealed dynamic type output sound pressure level 103 dB playback frequency band 5 to 35,000 Hz impedance 42 ohms cord 1.2 m mass (excluding cord) approx. 170 g
Technica headphones with large caliber drivers. Comfortable listening is achieved with head support for an optimal fit and memory foam earpads. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.9.2 sweep test is good
Accessories: No accessories
Main Specifications: Model: Sealed Dynamic Driver: φ53mm CCAW Bobbin Winding Voice Coil Output Sound Pressure Level:
106 dB Playback Frequency Band: 10 to 25,000 Hz Impedance: 40 Ohms Weight (excluding cord) approx. 270 g Plug: 6.3 mm standard/φ3.5 mm mini gold-plated stereo 2-way cord: 3.0 m (single out)
MC type cartridge using a PCOCC6N coil. The low frequencies are tight, bright, and light, and have good momentum, making it suitable for popular systems in general. It is also recommended for those who listen to jazz, rock, etc. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.9.4 operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.35 mV optimal needle pressure 1.5 g oval needle playback frequency band 15 to 50,000 Hz dead weight 5g
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Digital cable 0.7 m PCCC+Hi-OFC hybrid conductor with independent ground wire and multiple shield construction to block harmful noise. Alligator mouth to Y lug conversion cable included (Murakoshi Yoichi)
Maintenance Information: 2024.7.13
Accessories: Alligator to Y lug conversion cable
The price has been reduced. 2024/8/25 sales price 4,800 yen. RCA cable, 1.0 m pair, line cable using hybrid conductors of PCOCC and OFC. There is an appearance, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.8.23 continuity confirmed
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (YONEJIMA Satoshi)
Accessories: original box
Set of 4. A spike-based insulator with a high sound quality design made of brass and damping rubber “Honeynight.” It suppresses metal sounds and achieves a clear sense of localization and a thick mid to low range. There are threads and scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: brass hanenite damping structure, diameter 39 x height 7.5 mm, mass approx. 71 g/piece
It uses an RCA cable 0.7 m pair of LC-OFC conductors, and the sound is less annoying. The exterior has some dullness and disappearing characters (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior is dull, and there are small scratches on the installation surface (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Speaker cable 1.6 m pair end has an untreated appearance, dullness, scuffs, etc., and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.7.31 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/9 sales price 1,000 yen Speaker cable 3.0 m and 2.2 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
The price has been reduced! 2024/5/9 sales price 1,000 yen speaker cable 1.3 m pair end unprocessed speaker cable 2.8 m pair end unprocessed soft introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
A high-precision level gauge that is essential for leveling players. It is a long-selling model with an aluminum body (Murakoshi Yoichi)
Accessories: none
The price has been reduced! 2024/6/20 sales price 1,200 yen speaker cable This is an orthodox parallel cable made by stringing 336 unprocessed 0.1 mm diameter wires at 3.1 m pairs. The exterior has a feeling of use such as discoloration and dullness on the sheath (Takahashi Nobuyuki)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: none
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none