※Since there are no compatible cartridges, it has not been checked. Audio-Technica SP exclusive replacement needle. For those who use AT-3M, please use it as stock (Kobayashi Hitoshi)
Accessories: original box
Main specifications: 2.5 mil diamond needle, standard needle pressure 2 to 3 g
Video cable 1.5m 75Ω audio-technica video cable PCOCC conductors are used. The white rubber on the plug is missing, and there are tape marks (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
RCA cable 1.5m pair Audio-Technica's standard RCA cable. Uses OFC conductors. It comes in handy because it's easy to handle. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Along with the MG-10, this headshell is popular. The overhang can be adjusted and the model is easy to use. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
Main specifications: dead weight 11g (actual measurement)
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been reduced! 2024/6/20 sales price 1,200 yen speaker cable This is an orthodox parallel cable made by stringing 336 unprocessed 0.1 mm diameter wires at 3.1 m pairs. The exterior has a feeling of use such as discoloration and dullness on the sheath (Takahashi Nobuyuki)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: none
It is a headshell that combines magnesium alloy with anti-vibration material. Overhang and left/right tilt can be adjusted (Oikawa Tetsuji)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
The price has been reduced! 2024/5/9 sales price 1,000 yen speaker cable 1.3 m pair end unprocessed speaker cable 2.8 m pair end unprocessed soft introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Pure silver lead wire for cartridges. Clarity can be improved, and the sense of sound field and depth can be expanded. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
Main specifications: pure silver (99.99% purity) Ritz Reed wire for cartridges
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
The price has been reduced! 2024/5/11 sales price 500 yen Speaker cable 1.3 m pair end is an easy-to-use parallel type, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Audio-Technica's classic shell. Uses die-cast aluminum. 3 levels of overhang can be adjusted
Accessories: screws
Main specifications: Die-cast aluminum, dead weight 13g
This is a broadband VM vibration cartridge with a gold-evaporated Boronmuk tapered cantilever and an ML (microlinear) stylus. You can enjoy various genres of music without getting tired of listening to the delicate and beautiful sound. The dullness of the body is slightly noticeable. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 operation confirmed
Accessories: No accessories
Main specifications: VM type playback frequency range 10 to 23,000 Hz impedance 2.1 kΩ needle pressure 0.75 to 1.75 g (1.25 g standard) dead weight 8.3 g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 continuity confirmed
Accessories: No accessories
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell. It is an attractive classic model with stable popularity and high versatility. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
It uses an RCA cable 0.7 m pair of LC-OFC conductors, and the sound is less annoying. The exterior has some dullness and disappearing characters (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
Technica headphones with large caliber drivers. Comfortable listening is achieved with head support for an optimal fit and memory foam earpads. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.9.2 sweep test is good
Accessories: No accessories
Main Specifications: Model: Sealed Dynamic Driver: φ53mm CCAW Bobbin Winding Voice Coil Output Sound Pressure Level:
106 dB Playback Frequency Band: 10 to 25,000 Hz Impedance: 40 Ohms Weight (excluding cord) approx. 270 g Plug: 6.3 mm standard/φ3.5 mm mini gold-plated stereo 2-way cord: 3.0 m (single out)
Audio-Technica's classic shell. Uses die-cast aluminum. The overhang can be adjusted in 3 levels. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 13g
The price has been drastically reduced. 2024/8/17 sales price 12,000 yen. AT120ea/g with shell. It is the basic model of the AT100 series, and although it is MM, it has the subtlety and thick bass typical of Technica. There is dullness on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.8.16 Operation confirmed
Accessories: instruction manual, original box, wrench
Main specifications: mm type oval needle playback frequency band 18 to 20,000 Hz output voltage 4.0 mV needle pressure 1.4 g standard dead weight 17.4 g
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
African paddock (solid wood) is used for the housing. It lets you hear deep bass and clear mid- to high-pitched sounds (Oikawa Tetsuji)
Maintenance information: 2024.8.18 Operation confirmed
Accessories: pouch
Main specifications: sealed dynamic type output sound pressure level 103 dB playback frequency band 5 to 35,000 Hz impedance 42 ohms cord 1.2 m mass (excluding cord) approx. 170 g
Set of 4. A spike-based insulator with a high sound quality design made of brass and damping rubber “Honeynight.” It suppresses metal sounds and achieves a clear sense of localization and a thick mid to low range. There are threads and scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: brass hanenite damping structure, diameter 39 x height 7.5 mm, mass approx. 71 g/piece
Fine gold series with 1.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. You can see a feeling of use, such as appearance, dullness, corrosion, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.24 continuity confirmed
Accessories: none
Audio-Technica headshell It is a classic model that is attractive due to its stable popularity and high versatility (Sasaki Shota)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
Audio-Technica model number unknown gold-plated conversion jack. The female side is well made, and the manufacturer's logo is also engraved. There are dull stains all over (Murakoshi Yoichi)
Accessories: none
※Cleaning liquid is out of stock. Directional velvet brush with high cleaning performance A convenient wide type that allows you to wipe records in one go. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: unknown brush
Lightweight cartridge shell that was standard equipment on the AT-1009. It has a highly rigid 2-piece structure, and it is a convenient shell that makes it easy to adjust the overhang. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Key Specifications: Impact molded lightweight shell, dead weight 9g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Digital cable 0.7 m PCCC+Hi-OFC hybrid conductor with independent ground wire and multiple shield construction to block harmful noise. Alligator mouth to Y lug conversion cable included (Murakoshi Yoichi)
Maintenance Information: 2024.7.13
Accessories: Alligator to Y lug conversion cable
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
Speaker cable 1.6 m pair end has an untreated appearance, dullness, scuffs, etc., and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.7.31 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/9 sales price 1,000 yen Speaker cable 3.0 m and 2.2 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Stereo mini plug extension cable A stereo mini plug extension cable using a 3.0 m OFC conductor. Can be used to extend headphones, etc. (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
※The lead wire is out of stock. Audio-Technica headshell It is a classic model that is attractive for its high versatility. The exterior is dull and has a feeling of use (Daiki Goto)
Maintenance information: 2024.7.7 operation confirmed
Accessories: original box
Main specifications: magnesium alloy body weight 10g
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (YONEJIMA Satoshi)
Accessories: original box
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Inexpensive because there are small scratches and corrosion. A classic headshell made of magnesium alloy with an attractive, unobtrusive sound. Overhang and left/right tilt adjustments are possible. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.16 continuity confirmed
Accessories: none
Main specifications: dead weight 10g