Lightweight and stylish magnesium shell. This is a rare item that is rarely in stock. There is a slight feeling of use such as dullness (Asae Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
Main specifications: magnesium alloy overhang adjustment 3-point screw stop, self-weight approx. 7 g
Speaker cable 1.7 m pair Speaker cable using Audio-Technica's signature technology PCCC conductor+ceramic insulator. There is a feeling of use on the exterior such as dullness and scratches (Asaine Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
Designed with an emphasis on sound quality using a PCOCC+OFC hybrid conductor with a 1.3 m pair of RCA cables. Titanium sheath suppresses noise. The titanium-blended sheath absorbs static and electromagnetic noise. Low-distortion, low-resistance plug with non-magnetic 24K gold plating, and silver solder with an emphasis on strength and sound quality is used to connect the cable to the plug. The exterior is slightly dull and there is a feeling of use (Satoshi Yonejima)
Maintenance information: 2023.5.20 continuity confirmed
Accessories: none
RCA cable 4.2 m pair audio-technica plug LC-OFC class 1 conductor has been produced for over 10 years and is a long-selling product capable of pure signal transmission. The balance is a flat, tight bass, and an indescribable cable with a smooth high-frequency luster. There is friction on the sheath, dirt, and deterioration on the plug (Murakoshi Yoichi)
Maintenance information: 2024.9.7 continuity confirmed
Accessories: none
※Since the needle cover cannot be fixed, it is inexpensive. Audio-Technica's standard cartridge. The wide range, clear, and unmistakable sound is attractive. The cantilever is slightly to the right (Mizushima Itsuro)
Maintenance information: 2024.9.4 operation confirmed
Accessories: none
Main specifications: VM type 4 mV frequency characteristics 10 to 20,000 Hz needle pressure 1.0 to 2.0 g (1.5 g standard) dead weight 6 g
This is an attractive MM cartridge with a bright, punchy sound. It uses a VM type power generator to pick up even the smallest sounds engraved on records. It is a cartridge with high cost performance (Mizushima Itsuro)
Maintenance information: 2024.9.4 operation confirmed
Accessories: none
Main specifications: VM type 20 to 20,000 Hz 4.5 mV 1.0 to 1.8 g 6.5 g
※There is a smell in the room. Only one speaker cable, 10.5 m, has an unprocessed end, and a separator is attached, so you can enjoy straight sound without the PCCC+Hi-OFC hybrid habit. There are threads and dullness on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
The price has been reduced! 2024/9/4 sales price 25,000 yen XLR cable 0.7 m pair This is an interconnect cable from the current Fluat (Flute) series. Hi-Fi cable with minimal signal loss and distortion (Tamura Eiji)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Set of 4. A spike-based insulator with a high sound quality design made of brass and damping rubber “Honeynight.” It suppresses metal sounds and achieves a clear sense of localization and a thick mid to low range. There are threads and scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: brass hanenite damping structure, diameter 39 x height 7.5 mm, mass approx. 71 g/piece
Lightweight cartridge shell that was standard equipment on the AT-1009. It has a highly rigid 2-piece structure, and it is a convenient shell that makes it easy to adjust the overhang. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Key Specifications: Impact molded lightweight shell, dead weight 9g
This is a broadband VM vibration cartridge with a gold-evaporated Boronmuk tapered cantilever and an ML (microlinear) stylus. You can enjoy various genres of music without getting tired of listening to the delicate and beautiful sound. The dullness of the body is slightly noticeable. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 operation confirmed
Accessories: No accessories
Main specifications: VM type playback frequency range 10 to 23,000 Hz impedance 2.1 kΩ needle pressure 0.75 to 1.75 g (1.25 g standard) dead weight 8.3 g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 continuity confirmed
Accessories: No accessories
Main specifications: magnesium alloy body weight 10g
RCA cable 1.0 m pair is an inexpensive and easy to handle cable. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
Stereo mini plug extension cable A stereo mini plug extension cable using a 3.0 m OFC conductor. Can be used to extend headphones, etc. (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
RCA cable 1.5m pair Audio-Technica's standard RCA cable. Uses OFC conductors. It comes in handy because it's easy to handle. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
Audio-Technica's classic shell. Uses die-cast aluminum. 3 levels of overhang can be adjusted
Accessories: screws
Main specifications: Die-cast aluminum, dead weight 13g
It is a headshell that combines magnesium alloy with anti-vibration material. The overhang and left/right tilt can be adjusted. Lead wire is out of stock (Oikawa Tetsuji)
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
Fine gold series with 1.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. You can see a feeling of use, such as appearance, dullness, corrosion, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.24 continuity confirmed
Accessories: none
The price has been reduced. 2024/8/25 sales price 4,800 yen. RCA cable, 1.0 m pair, line cable using hybrid conductors of PCOCC and OFC. There is an appearance, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.8.23 continuity confirmed
Accessories: none
African paddock (solid wood) is used for the housing. It lets you hear deep bass and clear mid- to high-pitched sounds (Oikawa Tetsuji)
Maintenance information: 2024.8.18 Operation confirmed
Accessories: pouch
Main specifications: sealed dynamic type output sound pressure level 103 dB playback frequency band 5 to 35,000 Hz impedance 42 ohms cord 1.2 m mass (excluding cord) approx. 170 g
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Finger hooks are inexpensive because they are replacements. Technica die-cast aluminum headshell. Although it is compact in size, it has high rigidity. Overhang and left/right tilt adjustments are possible. There are only different types of white lead wires. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight 14g (actual measurement)
Headshell of unknown model number. It is similar to AT-MS11, but details are unknown. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight g
Technica Hi-CP Cartridges The inside of Technica's MC needle makes a clear, firm sound. The stylus is good, but the cantilever is slightly to the right (Oikawa Tetsuji)
Maintenance information: 2024.8.17 operation confirmed
Accessories: needle cover
Main specifications: MC type, output voltage 0.4 mV, oval needle pressure 1.5 g (1.2 to 1.8), impedance 17 ohms, dual moving coil system, dead weight 6.8 g
It is a headshell that combines magnesium alloy with anti-vibration material. Overhang and left/right tilt can be adjusted (Oikawa Tetsuji)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
Audio-Technica headshell It is a classic model that is attractive due to its stable popularity and high versatility (Sasaki Shota)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
The price has been drastically reduced. 2024/8/17 sales price 12,000 yen. AT120ea/g with shell It is the basic model of the AT100 series, and although it is MM, it has the subtlety and thick bass typical of Technica. There is dullness on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.8.16 Operation confirmed
Accessories: instruction manual, original box, wrench
Main specifications: mm type oval needle playback frequency band 18 to 20,000 Hz output voltage 4.0 mV needle pressure 1.4 g standard dead weight 17.4 g
It uses an RCA cable 0.7 m pair of LC-OFC conductors, and the sound is less annoying. The exterior has some dullness and disappearing characters (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
Video cable 1.5m 75Ω audio-technica video cable PCOCC conductors are used. The white rubber on the plug is missing, and there are tape marks (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
Unopened item XLR plug (female) - mono standard plug cable, 3.0 m. This is a cannon conversion cable that can be connected to a microphone, mixer, power amplifier, etc. (Kobayashi Hitoshi)
Maintenance Information: Unopened Item
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Kojima Yosuke)
Accessories: none
A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior is dull, and there are small scratches on the installation surface (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Along with the MG-10, this headshell is popular. The overhang can be adjusted and the model is easy to use. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
Main specifications: dead weight 11g (actual measurement)
Speaker cable 1.6 m pair end has an untreated appearance, dullness, scuffs, etc., and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.7.31 continuity confirmed
Accessories: none
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Sasaki Shota)
Maintenance information: 2024.7.29 continuity confirmed
Accessories: nothing
Main specifications: aluminum 15g
Technica die-cast aluminum headshell Despite its compact size, it has high rigidity. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: Die-cast aluminum, weight approx. 13g
Digital cable 0.7 m PCCC+Hi-OFC hybrid conductor with independent ground wire and multiple shield construction to block harmful noise. Alligator mouth to Y lug conversion cable included (Murakoshi Yoichi)
Maintenance Information: 2024.7.13
Accessories: Alligator to Y lug conversion cable
※The lead wire is out of stock. Audio-Technica headshell It is a classic model that is attractive for its high versatility. The exterior is dull and has a feeling of use (Daiki Goto)
Maintenance information: 2024.7.7 operation confirmed
Accessories: original box
Main specifications: magnesium alloy body weight 10g
A high-precision level gauge that is essential for leveling players. It is a long-selling model with an aluminum body (Murakoshi Yoichi)
Accessories: none
The price has been reduced! 2024/6/20 sales price 1,200 yen speaker cable This is an orthodox parallel cable made by stringing 336 unprocessed 0.1 mm diameter wires at 3.1 m pairs. The exterior has a feeling of use such as discoloration and dullness on the sheath (Takahashi Nobuyuki)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: none
It is a set of a directional velvet brush with high cleaning performance and a cleaning liquid that suppresses static electricity, but there is no liquid left. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Cleaning Kit Wide Type