Refreshed during interior and exterior maintenance in July 2022! It is an S8R composed of late stage famous units representing JBL. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2022.7.13 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, lattice repair/polishing/painting, backing fabric replacement, woofer maintenance (edge replacement, cone paper coating), passive cone paper coating, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning), tweeter maintenance (horn polishing, magnetic circuit rust removal, etc.) Gap cleaning, terminal cleaning), network maintenance LX5 (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) N7000 (terminal and screw rust removal, acid cleaning, insulation bush replacement. ATT contact cleaning and contact grease application. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. input/output waveform and balance check, sound output check), unit detachable diffuser repair)
Accessories: none
Main specifications: 3 way 3 speakers 1 passive radiator system low range unit 38cm cone type LE15A, medium range unit horn type 375, high range unit 075, passive radiator 38cm cone type PR15, network LX5/N7000 sound pressure level 95dB allowable input 125W W1020 x H670 x D510 mm 82 kg/book
The price has been drastically reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The price has been drastically reduced! 2024/4/18 sales price 278,000 yen A universal player equipped with a VRDS-NEO mechanism that uses a turntable made of duralumin material. You can enjoy wonderful sound that overturns the impression you had of a universal player. It is especially recommended for those looking for a cleaner, more informative sound. On the exterior, there is a feeling of use such as fine scratches on the corner of the front panel. Serial 50032 (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: remote control instruction manual, power cable, original box
Main Specifications: Playable Disc/DVD Video/DVD Audio/SACD/CD/CD/CD-RW/Video CD/DVD-R/DVD-RW W442 × H153 × D353 mm 23.5 kg
The price has been drastically reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570 Hz, 3.5 kHz impedance 8 ohms allowable input 200 W efficiency 90 dB size W185 ✕ H1,000 ✕ D300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The price has been reduced. 2024/2/23 sales price 99,800 yen with box! RME audio interface. A rich 18-in/18-out audio channel, a high-performance digitally controlled preamp, and an AD/DA converter all support operation at 192 kHz. Achieving the performance required in professional settings with a half-rack size body (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, setup disc, original box
Main specifications: maximum 192 kHz compatible coaxial input/output x 1 system maximum 192 kHz (S/MUX4) compatible optical input/output x 1 system analog input/output can be used simultaneously 8 channel AD/DA converter, mixing console, external effects insert function, word clock (BNC) input/output x 1 system MIDI input/output, 2 MIDI input/output systems, W216 x H46 x D145, weight 1.1 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, mounting hardware
Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. The exterior has scratches and paint bald spots. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is the specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
Maintained! Pre-main amplifier with built-in DA converter. An amplifier that allows you to enjoy a gentle, expansive sound like Denon with analog input, and sound quality with a wide range with digital input. This amplifier can also be recommended as an amplifier to be combined with PC audio (Daiki Goto)
Maintenance information: 2024.2.21 maintained (function, recout, digital input, speaker, tape, loudness switch disassembly, polishing grease application, output relay replacement, bus volume replacement, solder repair, various volumes, switch cleaning, interior and exterior inspection and cleaning, digital input/output confirmation, operation confirmation. (*Since the bus volume is similar, the bus lifts slightly when the source is directly off)
Accessories: none
Main specifications: 110W+110W (8Ω) phono (MM/MC switching) 5 digital input systems (coaxial x 3/optical x 2) W434 x H180 x D420 mm 18 kg released in 1989 (Kojima Yosuke)
The price has been reduced. 2023/5/31 sales price 85,000 yen Asahi Lumber horizontal rack. It is a model with plenty of storage capacity and adjustable height. As an audio rack, its performance is high, and it is a stable unit. It is made of full-body natural wood, has a sturdy structure, and is highly decorative. ※Since this is a large item, shipping costs will be estimated separately. There are scratches, threads, etc. on the exterior. Also, felt is attached to the bottom (Takasaki Atsushi)
Accessories: none
Main specifications: W1227×D565×H1060mm
The price has been reduced! 2024/4/13 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defects have been fixed. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced! 2024/4/13 sales price 79,800 yen Maintained! Audionics of Oregon power amplifier RF regular, 117V specification In Japan, it is an American manufacturer imported by R.F. Enterprises under the name Audio of Oregon. A thick, low center of gravity sound with a punchy sound. It is an American sound suitable for jazz and rock. It can also be used as a mono power amplifier. There are exterior, dullness, small scratches, scratches on the top plate, etc. ※The plug has been changed. (YONEJIMA Satoshi)
Maintenance information: 2024.4.13 Maintained (main amplifier circuit resistor replacement. Idling current misalignment adjustment. (Distortion level check)
Accessories: No accessories
Main specifications: 170W+170W (2Ω) 120W+120W (4Ω) 70W+70W (8Ω) 225W (8Ω, when connected to BTL) AC117V 50Hz/60Hz dimensions W483 × H89 × D216 mm weight 7.7 kg
CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There are scratches on the exterior, front panel, and top plate, overall dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.27 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
Maintained! The 306 series was supported as a pure audio entry model. It has plenty of phono circuits, is MM/MC compatible, and impedance can be adjusted. Clear, high quality sound quality with W super servo system. I feel that the sound quality, which has a slight core, is good in this era. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.22 maintenance completed (mode, recout, input, subsonic, cartridge, phono selector switch disassembly, polishing grease application, replacement of all indicator lamps, solder repair, pin jack polishing, internal inspection and cleaning, each volume, switch cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: PHONO (MM/MC) 2 system frequency characteristics 0.8 Hz to 170 kHz dimensions W480 x H100 x D403 mm weight 10.5 kg
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
The price has been reduced. 2024/4/2 sales price 36,800 yen ※48kHz, de-emission lamps are out of stock. The luminescence can be confirmed, so there is no problem when using it. It is a convenient D/A converter with volume. The mid and low frequencies are thick, and the range is moderate but it is characterized by analog-like sound quality. It effectively gently relaxes hard sound CD players. The exterior has dullness, small scratches, and missing characters in part 1 (Oikawa Tetsuji)
Maintenance information: 2024.4.2 operation confirmed (44.1/48/96 kHz sound output OK)
Accessories: none
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
Comes with original box! IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. Serial microP11468 (Tomonori Asaine)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power adapter, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
Comes with original box! IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. Serial microP11204 (Tomoho Asaine)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power adapter, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
※It has a cigarette smell, so it's cheap. A rare Audiocraft RCA to XLR conversion converter has arrived. A useful item for converting an RCA pin cable into a balanced cable. The exterior has paint bald spots, dirt marks, etc. Serial 43217 (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: W200×H75×D300mm 2.7 kg
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/28 sales price 29,800 yen*Currently sold! The CD player and auto reverse cassette deck are integrated. This is a space-saving model compatible with 3 media that can also be recorded and played back using a USB memory. The exterior has a feeling of use such as dullness. ※The sound shakes slightly when recording and playing back the cassette. Serial 0040112 (Tomoho Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: remote control instruction manual
Main specifications: external dimensions 435 mm x 145 mm x 288 mm mass 5.1 kg
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
A low price pre-main amplifier that allows you to enjoy Marantz-like sound. How about it as an introduction to audio or as a subsystem, etc. There is a feeling of use such as scratches and dullness
Maintenance information: 2024.4.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: W440×H124×D340 mm 7.5 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
The price has been reduced. 2024/3/23 sales price 16,800 yen ※There is no problem with operation, but it is currently sold because it is cheap. A speaker equipped with a C-CAM (Ceramic Coated Alminium Magnesium) driver and characterized by a high range of up to 30 kHz. It makes me hear the sense of SN and transparency typical of modern speakers. There are no noticeable scratches on the exterior, but there is stickiness on the rubber part (Oikawa Tetsuji)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: original box, instruction manual
Main specifications: 2-way bookshelf type, anti-magnetic rear port, bass reflex impedance, 8 ohms, efficiency 88 dB, efficiency, 88 dB, frequency characteristics, 55 Hz to 30 kHz, W165 x H260 x D 180 mm, weight: 3.86 kg
※Since it is cheap, it is handed over as is, and the remote control works, but only the high-cut filter does not respond. Comes with a remote control. It is a subwoofer that condenses the know-how of YAMAHA, a prestigious audio company. Tight low frequencies support the system. The feeling of use such as scratches and dullness is noticeable (Daiki Goto)
Maintenance information: 2024.3.7 operation confirmed
Accessories: remote control
Main specifications: built-in 25cm anti-magnetic superwoofer amplifier (output 120W) playback frequency band 20 to 160 Hz YST system equipped with 2 pin terminals and speaker terminals W330 x H440 x D380 mm 22 kg
The price has been reduced. 2024/3/6 sales price 15,000 yen*Currently sold because it is cheap. Small mixer with built-in processor. It can also be used as a PA processor by installing it between the mixer and power amplifier (Oikawa Tetsuji)
Maintenance information: 2024.3.6 operation confirmed
Accessories: power adapter
Main specifications: W155 x H40 x D102 mm (excluding protrusions) 540 g
The flat characteristics make the sound good and are delicate. The sound quality is relatively thick among Audio-Technica models, and I like it without losing too much weight. The cantilever is slightly to the right. There is dirt and dullness (Hiura Katsuji)
Maintenance information: 2024.2.23 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.75 g oval needle self weight 9 g
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
Disposal price reduction. 2023/9/28 sales price 10,000 yen ※There is no problem with operation, but it is currently sold because it is cheap. Behringer's classic line mixer. Equipped with 16 inputs in a compact 1U housing, it can be used as a multi-purpose line mixer (Daiki Goto)
Maintenance information: 2023.9.28 Operation confirmed
Accessories: original box, instruction manual, power cable
Main specifications: W483 x H44.5 x D217 mm weight 2.3 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
*9V/2.0A specification. An audio file-standard DC power adapter that uses “active noise cancellation +” using military radar technology (Asaine Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Main specifications: Approx. 150g (actual measurement)
*9V/2.0A specification. An audio file-standard DC power adapter that uses “active noise cancellation +” using military radar technology (Asaine Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Main specifications: Approx. 150g (actual measurement)
This is an attractive MM cartridge with a bright, punchy sound. It uses a VM type power generator to pick up even the smallest sounds engraved on records. It is a cartridge with high cost performance (Yamato Yuki)
Maintenance information: 2023.8.5 sound output confirmed
Main specifications: VM type 20 to 20,000 Hz 4.5 mV 1.0 to 1.8 g 6.5 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
※Since there are no compatible cartridges, it has not been checked. Audio-Technica SP exclusive replacement needle. For those who use AT-3M, please use it as stock (Kobayashi Hitoshi)
Accessories: original box
Main specifications: 2.5 mil diamond needle, standard needle pressure 2 to 3 g
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Tamura Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum 15g
※Shipping service. Special Feature = All Audio Amplifiers/Latest 96 Model Total Test/2nd Recording Grand Prix Decision/Music and Playback/Audio Diagnosis//Listed Models: NATIONAL/EAS-25HH20 SATIN/M-15, M-15E CORAL/FLAT-5S, FLAT-6S PIONEER/TVX-90, CS-300 TRIO/KL-3060, KL-4060, KL-5080, SANYO/RD-3400, DCX- Published 1300/S45.4.1. The photograph is a sample, so the actual item may be broken or written on it.