The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
A popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. There are scratches and small scratches on the exterior. Serial 10090026 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
The price has been drastically reduced. 2023/9/11 sales price 600 yen. Set of 4 I think it's Cag's Vale. Details unknown. An insulator made of a hard rubber-like material. How about under an audio rack etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 70 x H7 mm approx. 31 g
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
※Since it is cheap, it is handed over as is, and the remote control works, but only the high-cut filter does not respond. Comes with a remote control. It is a subwoofer that condenses the know-how of YAMAHA, a prestigious audio company. Tight low frequencies support the system. The feeling of use such as scratches and dullness is noticeable (Daiki Goto)
Maintenance information: 2024.3.7 operation confirmed
Accessories: remote control
Main specifications: built-in 25cm anti-magnetic superwoofer amplifier (output 120W) playback frequency band 20 to 160 Hz YST system equipped with 2 pin terminals and speaker terminals W330 x H440 x D380 mm 22 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
※Inexpensive because it is in poor condition. A rare SD-45 under the name ULTRACRAFT. It has the same configuration as the same Audiocraft model. As is on the LP, it can also be used as a doughnut board if you turn it over and use it together with the adapter. There is red paint on the logo, paint has fallen all over, and there is a lot of dullness (Murakoshi Yoichi)
Accessories: 45 rotation adapter
Main specifications: brass material, self-weight 500g
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/28 sales price 29,800 yen*Currently sold! The CD player and auto reverse cassette deck are integrated. This is a space-saving model compatible with 3 media that can also be recorded and played back using a USB memory. The exterior has a feeling of use such as dullness. ※The sound shakes slightly when recording and playing back the cassette. Serial 0040112 (Tomoho Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: remote control instruction manual
Main specifications: external dimensions 435 mm x 145 mm x 288 mm mass 5.1 kg
*Currently sold because it is cheap. We have a full range of accessories such as the original box. The subwoofer is a slim, compact, and high-resolution sound bar that can be placed under a sofa, and has enhanced installability. Bluetooth compatible and easy to enjoy (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: original box, remote control, power cable, connection cable
Main specifications: bar speaker 30W+30W W497 x H64 x D104 mm 2.0 kg subwoofer W383 x H95 x D380 mm 6.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
The price has been reduced. 2024/2/23 sales price 99,800 yen with box! RME audio interface. A rich 18-in/18-out audio channel, a high-performance digitally controlled preamp, and an AD/DA converter all support operation at 192 kHz. Achieving the performance required in professional settings with a half-rack size body (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, setup disc, original box
Main specifications: maximum 192 kHz compatible coaxial input/output x 1 system maximum 192 kHz (S/MUX4) compatible optical input/output x 1 system analog input/output can be used simultaneously 8 channel AD/DA converter, mixing console, external effects insert function, word clock (BNC) input/output x 1 system MIDI input/output, 2 MIDI input/output systems, W216 x H46 x D145, weight 1.1 kg
※1 bottle only. Currently sold. A full range of 8cm high grade glass cloth cones. It has a light, unobtrusive sound and is recommended for pop music and female vocals. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.2.17 sweep test good
Accessories: No accessories
Main specifications: 6Ω 84dB 20W 0.54 kg
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a long-time hospital-grade seller that can be used by beginners to advanced users (Tomoho Asae)
Accessories: original box
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570Hz,3.5kHz impedance 8Ω allowable input 200W efficiency 90dB size W185 x H1000xD300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The price has been reduced. 2024/3/23 sales price 16,800 yen ※There is no problem with operation, but it is currently sold because it is cheap. A speaker equipped with a C-CAM (Ceramic Coated Alminium Magnesium) driver and characterized by a high range of up to 30 kHz. It makes me hear the sense of SN and transparency typical of modern speakers. There are no noticeable scratches on the exterior, but there is stickiness on the rubber part (Oikawa Tetsuji)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: original box, instruction manual
Main specifications: 2-way bookshelf type, anti-magnetic rear port, bass reflex impedance, 8 ohms, efficiency 88 dB, efficiency, 88 dB, frequency characteristics, 55 Hz to 30 kHz, W165 x H260 x D 180 mm, weight: 3.86 kg
Maintained! Genuine Electri A stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket that is compatible with the latest sources is attractive. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Since the electrolytic condenser liquid leak replacement shield case is out of stock, the additional guide pin was damaged, so create and paste a sticker with the missing letter in the hakama replacement character. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT2411 (Fujisawa Yukishi)
Maintenance information: 2024.4.8 Maintained (meter and display lamp replacement (there is slight unevenness in characters due to deterioration of the light guide plate, but this is the current situation) Electrolytic capacitor, rotary SW replacement. Apply heat-resistant tape. Solder correction. Clean card edge contacts, switches, and volumes. Possible panel peeling correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
The Marantz network player is easy to use because it is compatible with network audio, streaming, AirPlay2, Bluetooth, and USB memory. PCM supports playback up to 192 kHz/24 bit, and DSD supports playback up to 5.6 MHz. The DAC is equipped with an ES9016K2M compatible with high-resolution sound source specifications similar to the ND8006. There is a slight feeling of use such as small scratches on the top plate. Serial BBL36190200699 (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: DSD 2.8/5.6 MHz compatible PCM 192 kHz/24 bit Playback frequency range 2 Hz to 100 kHz W440 x H106 x D371 mm (without antenna) 6.6 kg
A low price pre-main amplifier that allows you to enjoy Marantz-like sound. How about it as an introduction to audio or as a subsystem, etc. There is a feeling of use such as scratches and dullness
Maintenance information: 2024.4.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: W440×H124×D340 mm 7.5 kg
The price has been reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The price has been drastically reduced! 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1298721 (Hiroki Aso)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cable
Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
*Currently sold. It is an improved version of the small and popular blockbuster model CONTROL1, and its tight and energetic sound is impressive. It is a speaker that can be used in a variety of ways, from pure audio to surround sound (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
Refreshed during interior and exterior maintenance in July 2022! It is an S8R composed of late stage famous units representing JBL. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2022.7.13 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, lattice repair/polishing/painting, backing fabric replacement, woofer maintenance (edge replacement, cone paper coating), passive cone paper coating, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning), tweeter maintenance (horn polishing, magnetic circuit rust removal, etc.) Gap cleaning, terminal cleaning), network maintenance LX5 (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) N7000 (terminal and screw rust removal, acid cleaning, insulation bush replacement. ATT contact cleaning and contact grease application. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. input/output waveform and balance check, sound output check), unit detachable diffuser repair)
Accessories: none
Main specifications: 3 way 3 speakers 1 passive radiator system low range unit 38cm cone type LE15A, medium range unit horn type 375, high range unit 075, passive radiator 38cm cone type PR15, network LX5/N7000 sound pressure level 95dB allowable input 125W W1020 x H670 x D510 mm 82 kg/book
*9V/2.0A specification. An audio file-standard DC power adapter that uses “active noise cancellation +” using military radar technology (Asaine Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Main specifications: Approx. 150g (actual measurement)
*9V/2.0A specification. An audio file-standard DC power adapter that uses “active noise cancellation +” using military radar technology (Asaine Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Main specifications: Approx. 150g (actual measurement)
Comes with original box! IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. Serial microP11468 (Tomonori Asaine)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power adapter, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
Comes with original box! IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. Serial microP11204 (Tomoho Asaine)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power adapter, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley has a 60 Hz specification, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
We've reduced the price! 2024/4/18 sales price 278,000 yen A universal player equipped with a VRDS-NEO mechanism that uses a turntable made of duralumin material. You can enjoy wonderful sound that overturns the impression you had of a universal player. It is especially recommended for those looking for a cleaner, more informative sound. On the exterior, there is a feeling of use such as fine scratches on the corner of the front panel. Serial 50032 (Tomoho Asaine)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: remote control instruction manual, power cable, original box
Main Specifications: Playable Disc/DVD Video/DVD Audio/SACD/CD/CD/CD-RW/Video CD/DVD-R/DVD-RW W442 × H153 × D353 mm 23.5 kg
The price has been reduced! 2024/4/14 sales price 548,000 yen Manufacturer maintained! Equipped with an evolved VRDS-NEO (VMK-3.5-10). A 32-bit monaural DA converter with 4 circuits achieves overwhelming resolution and signal-to-noise ratio. It accurately reproduces not only detailed sound sources, but also very powerful sounds. Serial 30008 (Fujisawa Yukishi)
Maintenance information: 2024.2.27 manufacturer maintained (mechanical ASSY disassembled. cleaning. Lubrication clamper mechanism partial dismantling. Tweaks and corrections have been implemented. (Each part is cleaned, inspected, and adjusted)
Accessories: remote control, instruction manual, power cord
Main specifications: Playable disc/super audio CD, CD (CD-R/CD-RW compatible) output terminal 1 RCA/XLR output impedance RCA/47Ω XLR/100Ω frequency characteristics 5 Hz to 55,000 Hz S/N ratio 115 dB digital input RCA terminal/optical digital terminal/USB-B terminal 1 system each power consumption 27W W445 x H162 x D438 mm 28 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There are scratches on the exterior, front panel, and top plate, overall dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.27 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained! Pre-main amplifier with built-in DA converter. An amplifier that allows you to enjoy a gentle, expansive sound like Denon with analog input, and sound quality with a wide range with digital input. This amplifier can also be recommended as an amplifier to be combined with PC audio (Daiki Goto)
Maintenance information: 2024.2.21 maintained (function, recout, digital input, speaker, tape, loudness switch disassembly, polishing grease application, output relay replacement, bus volume replacement, solder repair, various volumes, switch cleaning, interior and exterior inspection and cleaning, digital input/output confirmation, operation confirmation. (*Since the bus volume is similar, the bus lifts slightly when the source is directly off)
Accessories: none
Main specifications: 110W+110W (8Ω) phono (MM/MC switching) 5 digital input systems (coaxial x 3/optical x 2) W434 x H180 x D420 mm 18 kg released in 1989 (Kojima Yosuke)
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg
The price has been reduced. 2024/3/6 sales price 15,000 yen*Currently sold because it is cheap. Small mixer with built-in processor. It can also be used as a PA processor by installing it between the mixer and power amplifier (Oikawa Tetsuji)
Maintenance information: 2024.3.6 operation confirmed
Accessories: power adapter
Main specifications: W155 x H40 x D102 mm (excluding protrusions) 540 g
The price has been reduced. 2021/12/19 sales price 1,000 yen. ※There was a sound, but details such as characteristics have not been checked. Dynamic microphone made in China with standard specifications. How about an easy way to use it for a wide range of purposes other than vocals? Total body length 165 cm, 210 g (Murakoshi Yoichi)
Maintenance information: 2021.11.28 sound output confirmed
Accessories: none
※It is inexpensive because it is in poor condition such as scratches and dirt. An audio board that uses carbon, which is effective in absorbing slight vibrations. It brings out the smoothness and excellent resolution of the entire band. It's easy to feel the effects in a room with good SN. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: none
Key Specifications: W482 ✕ D431 ✕ H20mm