The price has been drastically reduced. 2026/2/19 sales price 220,000 yen The RMA309 is a long arm designed to maximize the appeal of the SPU A type. It is compatible with orthophone's traditional A shell standard, and demonstrates its true performance in combination with SPU Classic A and early SPUs. Tracking errors are reduced due to the long effective length, and the arm structure with excellent mass balance fully reproduces the thick mid and low frequencies and rich overtones peculiar to SPUs. The sound image is relaxed and stable, and you can enjoy the rich musical expression unique to analog. This tonearm can truly be said to be the ideal partner for those who want to play vintage SPUs in earnest. There is slight dullness, but it is good for its age (Wang Zhan)
Maintenance information: 2026.2.18 Operation confirmed (both arms and cable can conduct. (Movable is also OK)
Accessories: phono cable, armrest, mounting screws, original box (foam only)
Main specifications: A shell dedicated tone arm, dynamic balance type, needle pressure 0 to 7 g, overhang 11 mm, effective length 320 mm (from screw on pivot to needle tip)
The price has been drastically reduced. 2025/12/20 sales price 99,800 yen Maintained! It comes with a Herman mark! Mono cartridge CA25D. One of the pinnacle of mono needles. The density unique to mono needles, which is not found in stereo needles, is attractive. There is rust on the cantilever. Serial 135502 (Murakoshi Yoichi)
Maintenance information: 2025.12.19 Maintained (damper replacement, coil adhesion repair)
Accessories: original box, needle cover, brush
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
This is an OrtoFon cartridge that uses a VMS power generator. The high-compliance cartridge makes an energetic sound. The exterior is dull and has a feeling of use (Matsumoto Tsuyoshi)
Maintenance information: 2026.2.23 Operation confirmed
Accessories: stylus cover
Main specifications: Mi type output 5 mV optimal needle pressure 2 g
It is the successor to the MC cartridge masterpiece SPU GE. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to conventional wild tones. Serial 6834 (Takasaki Atsushi)
Maintenance information: 2026.3.13 sound output confirmed
Accessories: original box, needle cover
Maintained! To commemorate SPU developer R. Goodmansen receiving the Cultural Achievement Award, this model was limited to 1000 pieces in total. It is a model with increased resolution while maintaining the characteristics of an SPU. (FUJISAWA KOSHI)
Maintenance information: 2026.3.12 Maintained (cantilever bending correction, damper adjustment, rubber sheet replacement, cleaning)
Accessories: original box, needle cover
Main specifications: MC type needle pressure range 3.0 to 5.0 g output voltage 0.3 mV frequency characteristics 20 Hz to 20 kHz internal impedance 1.5 Ω recommended load impedance 10 Ω or more
Comes with original box! It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 896801 (Murakoshi Yoichi)
Maintenance information: 2026.3.13 sound output confirmed
Accessories: original box, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
Long arm for SPU-G shells The beauty of the form unique to long arms is also attractive. A dynamic balance type that brings out the full appeal of the SPU. The deep and dense sound is exceptional (Murakoshi Yoichi)
Maintenance information: 2026.3.15 continuity confirmed
Accessories: phono cable, armrest, mounting screws, original box (styrene only)
Main specifications: total length 408 mm effective length 320 mm effective length 309 mm overhang 11 mm needle pressure range 0 to 7 g
The needle tip is Nagaoka's 62-105MK2. Extremely consistent quality cartridges at an affordable price You can enjoy the deep sound clearly even in rough conditions. As for the exterior, there is oxidation and dullness on the body (Asaine Tomoho)
Maintenance information: 2026.3.6 sound output confirmed
Accessories: none
Main specifications: MI type output voltage 5 mV needle pressure 1 to 3 g (optimal 2.5 g) playback frequency band 20-20,000 Hz dead weight 5g
Orthophone CA25D headshell It is rare that only shells are in stock. If you are looking for one, by all means (Daiki Goto)
Accessories: none
Main specifications: dead weight 22g (actual measurement)
※We replaced the stylus tip in 2022, but it is a round needle instead of an oval needle. This model was limited to 1000 pieces to commemorate receiving the SPU developer R. Goodmansen's Cultural Achievement Award. It is a masterpiece model with enhanced decomposition ability while retaining the characteristics of conventional SPUs (Murakoshi Yoichi)
Maintenance information: 2022.5.15 Maintained (A brand new diamond tip round needle has been repaired at the tip of the needle. (There is no problem with volume or CH balance)
Accessories: needle cover, original box
Main specifications: MC type needle pressure range 3.0 to 5.0 g output voltage 0.3 mV frequency characteristics 20 Hz to 20 kHz internal impedance 1.5 Ω recommended load impedance 10 Ω or more
Maintained! It is the successor to the MC cartridge masterpiece SPU GE. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to conventional wild tones. Serial 1941 (Fujisawa Yukishi)
Maintenance information: 2026.3.12 Maintained (damper adjustment, rubber seat replacement, cleaning)
Accessories: needle cover
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
The disposal price has been reduced. Member prices are not applicable. 2025.7.1 sales price 12,000 yen M type orthophone shell with a shallower G shell moat. Overall there is dullness (Oikawa Tetsuji)
Maintenance Information: 2025.7.1
Accessories: none
Main specifications: dead weight 10g
S terminal cable 2.0m 7N 24 gold plated large S terminal 75 ohm cable that uses high-purity copper as the conductor to reduce noise, go for those looking for a high quality S-video cable (Sasaki Shota)
Accessories: none
Maintained! Red emblem specification from the Audionics era. CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. Serial 125213 (Fujisawa Yukishi)
Maintenance information: 2026.3.12 Maintained (damper replacement, cleaning)
Accessories: needle cover, original box
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
The disposal price has been reduced. Member discounts are not applicable. 2025/8/19 sales price 12,000 yen. M type orthophone shell with a shallow moat of the G shell without lead wires. You can see a feeling of use such as appearance, dullness, discoloration, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.8.19 continuity confirmed
Accessories: none
Main specifications: dead weight 10g
※The needle tip has been replaced with a replacement needle. Extremely consistent quality cartridges at an affordable price You can enjoy the deep sound clearly even in rough conditions. As for the exterior, there is oxidation and dullness on the body (Asaine Tomoho)
Maintenance information: 2026.3.13 sound output confirmed
Accessories: none
Main specifications: MI type output voltage 5 mV needle pressure 1 to 3 g (optimal 2.5 g) playback frequency band 20-20,000 Hz dead weight 5g
Comes with a Herman mark! Mono cartridge CA25D. One of the pinnacle of mono needles. The density unique to mono needles, which is not found in stereo needles, is attractive. There is a crack at the tip of the needle cover. Serial 136563 (Kaneko Ryuichiro)
Accessories: needle cover, case
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
Digital RCA cable 1.0m perfect digital cable for visual equipment. It is a neutral character without the quirks typical of an orthophone. Dullness can be seen on the plug. (FUJISAWA KOSHI)
Maintenance information: 2026.3.9 continuity confirmed
Accessories: No accessories
L type with reinforced shields from the Danish famous Trans JS No. 6600. Since the boost ratio is high, the weak point where it is easy to pick up hum is overcome with a strong shield. Ideal for SPUs and older MC series with poor output, the rich tone is exquisite. There are dull and small scars (Murakoshi Yoichi)
Maintenance information: 2026.3.15 sound output confirmed
Accessories: none
Main specifications: primary impedance 1.5Ω, secondary impedance 1.5kΩ, boost ratio 1:31 MM with bypass switch, 520g (actual measurement)
High-rigidity heavyweight shell developed by Orthophone for cartridges other than the SPU series. Easy-to-use headshell with a flat cartridge ground (Matsumoto Tsuyoshi)
Maintenance information: 2026.3.15 continuity confirmed
Accessories: original box, screws
Main specifications: machined aluminum alloy, self-weight 16g
A G-shell elliptical needle model with a good level of shell from the Audionics era. The glossy, rich, and heavy sound has an appeal that won't fade. It is an eternal cartridge that fully conveys the appeal of analog. The lead wire has been replaced with a new one. Serial 515002 (Murakoshi Yoichi)
Maintenance information: 2026.3.15 sound output confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g