Maintained! This is a 2-way channel divider with variable frequency. Both LOWPASS and HighPass can be independently adjusted between 600 Hz and 6000 Hz. Detailed settings are possible, and it is a convenient specification (Daiki Goto)
Maintenance information: 2024.10.9 maintained (maintenance contents/power switch circuit wiring correction, rubber foot installation, each volume cleaning, inspection and cleaning, operation confirmation. (Note) This unit does not have a relay circuit, so be sure to turn the power on first and turn off the power last. (Noise comes in when the power is turned on later.)
Accessories: none
Main specifications: 2-way crossover frequency LOWPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) HIGHPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) independently variable low and high frequency with left and right independent volume dimensions W400 x H95 x D260 mm weight approx. 3.8 kg
The price has been reduced. 2024/8/29 sales price 69,800 yen Maintained! The crossover board is 250 Hz. A must-see channel divider for those who play the JBL 4350 or 4343 with multiple amplifiers. It has a variable high pass level control. Can also be stored in a 1EIA standard rack. The exterior has line marks on the top plate, and there are abrasions, small scratches, and dullness over time as a whole (Mizusaki Ryo)
Maintenance information: 2024.8.29 maintained (left and right level difference → variations in capacitor capacity within the board → replacement, distortion → poor connector contact, burn → cleaning, VOL cleaning, operation check, cannot be handled if dedicated parts are defective in the future)
Accessories: none
Main specifications: plug-in modular signal-to-noise ratio of 90 dB or more, channel separation 70 dB or more, AC 100 to 120 V/200 to 240 V, 50 Hz/60 Hz, power consumption 6 W, W483 x H44 x D194, 1.8 kg
The price has been drastically reduced. 2024/10/2 sales price 198,000 yen Maintained! We have everything from modular units 0 to 4. Very easy to use channel divider. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. A feeling of use can be seen, such as slight abrasions (Kobayashi Hitoshi)
Maintenance information: 2024.10.1 maintenance (all level controller disassembly, sliding brush, stator base cleaning, anti-oxidation treatment. Full frequency changeover switch disassembly, sliding contact cleaning and polishing, anti-oxidation treatment. DC offset adjustment for all channels)
Accessories: module units 0-4, instruction manual (copy)
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg