Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unparalleled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior (repair, polishing, oil finish, front and rear baffle repair, painting, saran net replacement, frame repair) woofer maintenance (edge replacement, cone paper coating) midmaintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit rust removal, center adjustment, sound absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly and cleaning, Magnetic circuit rust removal, gap cleaning, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning) defuser repair)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
※ It is inexpensive because there are scratches, stains, etc. DENON's current SACD player. A state of the art machine compatible with DSD 11.2 MHz high resolution sound source with USB input. A sense of speed and characteristics typical of a modern aircraft with good resolution have been added to the conventional loose, thick sound quality. Due to the balanced output switching function, there is no problem connecting to overseas amplifiers. There are scratches and stains on the top plate, and there are many scratches and stains on the remote control (Oikawa Tetsuji)
Maintenance information: 2024.4.20 operation confirmed (CD, SACD, HDCD, PCM384k, DSD 11.2 MHz test OK, remote control OK)
Accessories: remote control, instruction manual, power cable
Main specifications: DSD11.2 MHz/PCM384 kHz 32 bit compatible, digital input terminal USB-A x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 1, W434 x H137 x D404 mm 21.4 kg
Comes with original box A highly complete pre-main amplifier featuring Marantz's clear, glossy expression. The range is wide and thick, and you can choose any music genre. The fact that it supports balanced input is also attractive. There is a small scratch on the lower part of the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 100W+100W, 3 line inputs, 2 tape terminals, PHONO (MM/MC) balance input, W440 x H165 x D444 mm, 26 kg
Maintained by the manufacturer. A VRDS collaboration model incorporating DAC7, a Philips DAC. It is a player with a high degree of perfection that successfully combines the certainty of a TEAC skeleton with a PHILIPS DAC. You can see the high degree of perfection, where you can feel that it is tight and supple. There is dullness and small scars (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Maintained by the manufacturer (belt replaced, other parts replaced, and various parts inspected and adjusted)
Accessories: remote control
Main specifications: VRDS Mecha Philips DAC7 analog output 1 system digital output 2 systems W442 × H149 × D331 mm 10 kg
※Since it is cheap, it will be handed over as is. A CD player customized to airbow specifications from the CEC player CD2300. In addition to the high original CP, it has a darker tone with even more color and luster. It's an entry-class player with excellent cost performance. There are scratches on the exterior. Serial 1PX1710144 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual
Main Specifications: Direct Drive CD Player Playable Disc: CD, Finalized CD-R/RW Analog Output: RCA1 System Digital Output: TOS (optical) 1 system W435 x H104 x D290 mm Weight 3.6 kg
This is a model with PAD cryo treatment applied to the TOSHIBA 3P/2P conversion adapter. There are some cracks, but they are glued together (Oikawa Tetsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
RCA cable 1.2m pair LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It is a deep bass with natural sound quality, high resolution, and deep carving (Tomoho Asaine)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
RCA cable 1.2m pair LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It is a deep bass with natural sound quality, high resolution, and deep carving (Tomoho Asaine)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
※It is inexpensive because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
This is the first arrival at the A100BT5.0 Hi-Fi Hall, the higher-level model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. The exterior has dents in the upper right corner of the front, light line scratches in the lower left corner, and dullness throughout (Kanai Hidetsugu)
Maintenance information: 2024.4/18 manufacturer maintenance (disassembling the switch, polishing the contact, grease coating, idling adjustment, operation test)
Accessories: instruction manual, power cord
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
The original AC is missing. An esoteric isolation transformer. Stress-free 6N copper wire is used as the coil wire. We are pursuing the ultimate clean power supply environment by using the same extra thick 6N copper single wire for internal wiring. In addition to scratches on the exterior and top plate, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmation (power can be turned on)
Accessories: instruction manual
Main specifications: maximum rated power 1,500 W, number of outlets 6 external dimensions W246 x H219 x D422 mm, mass 31 kg
Exterior maintenance completed! This is JBL's standard monitor series. Compared to the 4343 and 4344 up until now, you can enjoy modern JBL sound that is more delicate, has a sense of balance between each band, and has good grain. Detailed nuances are coming out in vocals (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior cleaning, saran net turning and bonding, 9V battery replacement)
Accessories: instruction manual, saran net, jumper
Main specifications: 4 way 4 speakers, impedance 6 ohms, output sound pressure level 95 dB, W597 x H1080 x D400 mm, 90 kg/1
JBL medium bookshelf speaker Equipped with a newly developed compression driver, it uses a front twin port bass reflex system with a port at the bottom of the main body baffle. It is a speaker that is compatible with various genres, having both a high range that stretches comfortably and a low range with good sound separation. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, saran net
Main specifications: 2-way bookshelf type frequency characteristics 50 Hz to 40 kHz impedance 6 ohms crossover frequency 3.2 kHz W278 x H460 x D300 mm 12 kg
Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than the one after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. Serial AK9084 (Murakoshi Yoichi)
Maintenance information: 2024.4.19 maintenance (each SW, VOL cleaning, pin jack cleaning, lamp deterioration replacement, panel peeling correction, pin jack caulking, additional block capacitor installation, shield cable earth solder treatment, operation check)
Accessories: instruction manual (copy)
Main specifications: 4 input terminals, 4 PHONO input systems, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※It is cheap because it is in poor condition. Speaking of Grace, the F-8 is famous, and this was developed as a higher-level model. You can enjoy a powerful yet delicate sound. The condition is that there is a feeling of use such as dullness over time. The exterior has a feeling of use such as dullness, etc., and the needle tip is bent to the left (Asaine Tomoho)
Maintenance information: 2024.4.16 sound output confirmed
Main specifications: frequency range 10 to 40,000 Hz, output voltage approx. 5.5 mV, standard needle pressure 1.2 g, dead weight approx. 6 g
JICO's original MM cartridges. It is a model that uses SAS needles, has little sense of distortion and has excellent sound separation (Asaine Tomoho)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: none
Main specifications: mm needle pressure 1.0 to 1.5 g
JICO's original MM cartridges. It is a model that uses synthetic diamond round needles, and has little sense of distortion and excellent sound separation. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: none
Main specifications: Form MM tip shape oval needle needle pressure 1.5-2.5 dead weight approx. 5.8 g
Refreshment maintenance completed product! The refreshing sound was revived by replacing the banana-compatible SP terminal and replacing deteriorated parts, including electrolytic capacitors and transistors. A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. The sound, which doesn't require scale, is particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable. Serial 574515 (Tomonori Asaine)
Maintenance information: 2023.10.19 maintained (empty tube socket block capacitor, electrolytic capacitor, oil capacitor SP and RCA terminal semi-fixed VR, fuse holder replacement, SW/VOL disassembly contact refinement, oxidation and vulcanization prevention grease coating load test (1 kHz sine wave, 8 ohm load: 26W+26W actual measurement) sound output test)
Accessories: copy of instruction manual
Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg
The price has been drastically reduced! 2024/3/28 sales price 238,000 yen Maintained! 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has a feeling of use such as dullness and small scratches. Serial EB8504 (Jun Tamai)
Maintenance Information: 2024.3.28 Maintained (Balance Loudness Equalizer Gari Cleaning Can't Be Removed) 2024.2.29 Maintained (Each SW Vol Cleaning Glass Panel Peeling Correction Push Button Disassembly Cleaning Lamp Deterioration Replacement Fuse Replacement Compander Pot Defect Monitor Amplifier RCH Noise → FET Defective Replacement Transistor Replacement REC Relay failure → replacement)
Accessories: copy of the manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format W432 x H456 x D268 mm 21.0kg https://www.google.com/imgres?q=%E3%80%80teac%20A%0D%0A-7400&imgurl=https%3A%2F%2Fstatic.mercdn.net%2Fitem%2Fdetail%2Forig%2Fphotos%2Fm98735297374_3.jpg%3F1658983606&imgrefurl=https%3A %2f%2fricktumlinson.com%2fproducts%2fr4201596559.shtm&docid=PewPVBPIFP63rm&tbnid=wmdo707b5qid_m&vet=12ahukewih_zz0k9cfvqhlyqhhhhhhhhhv3oecfwqaa .. i&w=1080&h=1080&hcb=2&itg=1&ved=2ahukewih_zz0k9cfvqhlybhqhhvqm3oecfwqaa
※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. The exterior has scratches and paint bald spots. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is the specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The price has been reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The price has been reduced! 2024/4/17 sales price 498,000 yen It is the company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is also a masterpiece that gives off its own unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
Maintained! An amplifier with a black panel that exudes chic calm. Rather than being glossy like the PRA-2000, it sounds clear and straightforward, and has a sense of unity. It's an excellent product that blends in smoothly no matter what amplifier you combine it with. There are scratches on the exterior. Serial 6111100015 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (PHONO selector, tape monitor selector SW disassembly contact polishing cleaning/grease application. (Improved by cleaning balanced VR and main VR contacts, check the sound output for each other input/output connection)
Accessories: instruction manual
Main specifications: MC/MM input with CD direct input W466 x H136 x D302 mm 6.3 kg
The price has been drastically reduced. 2024/4/19 sales price 398,000 yen Restored in 2018! The HPD385 is mounted on the domestically produced box Recutangular York. The balance between the 15-inch unit and enclosure volume is excellent, bringing out the appeal of any source. There is no habit in low frequencies with a sense of volume, and it responds smoothly even to delicate high frequencies (Kojima Yosuke)
Maintenance Information: 2018.5.1 Maintained (unit edge replacement. Magnetic circuit slit interior cleaning, center adjustment exterior polishing. Replace the input terminal with a banana terminal compatible product. Output terminal polish cleaning. Faston terminal replacement. ATT cleaning. Check the input/output waveform and balance, and check the sound output. Frequency characteristics were measured and the original capacitors were continuously used because the results were good. Clear exterior finish, rear baffle paint Saran net cleaning, reupholstering)
Accessories: none
Main specifications: 2-way coaxial speaker, equipped with HPD385, 92dB, 8Ω, W611 x H1083 x D410 mm, weight approx. 57 kg/book
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
The price has been drastically reduced. 2024/4/16 sales price 298,000 yen ※Hinges are now in stock. An analog player representing LINN. This combination is equipped with a VALHALLA (Valhalla) power supply with the quietest and most accurate drive, and an ITTOK LV2 with firm and high rigidity on the arm! The large number of sounds unique to the LP12, the appeal of the tone, and the rich sense of scale sound quality are attractive. ※The turntable seat is an unoriginal one. Externally, there is oxidation on bumps and weights. (FUJISAWA KOSHI)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: hinges
Main specifications: belt drive floating VALHALLA power supply (33 rotations only) arm/ITTOK LV2/dynamic balance type/cartridge dead weight 2 to 15 g/needle pressure range 0 to 3 g/0.1 g step dimensions W445 x H140 x D356 mm weight 10.5 kg
Power transformer hammer tone color primary: 100V secondary: 320-280v-0-70V-380V/280V/280mA, 5V/3A, 2.5V-6.3V/5.2A x 2, 6.3V/3A application example: 2A3/6B4G/6L6/VT-52, etc. W120 x H120 x D105 mm approx. 5.2 kg (including actual measurement, protrusions) No TANG O badge, there are dullness and minor scratches in places (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/4/18 sales price 1,180,000 yen 800 Series Diamond advanced model. It reproduces a realistic sound field space that is extremely clear and has a high degree of transparency. The installation area has been reduced to fit the 800 Diamond into a living space, and it is a high-end machine that has both tightness and a sense of volume, and boasts a well-balanced mid-low range even at low volume. There is a light dent in the tweeter grille. Serial 0004457/0004458 (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: spike, transport lock, saran net jumper cable
Main specifications: 3-way bass reflex diamond dome tweeter x 1, warven kevlar cone midrange x 2 lohasel cone woofer playback frequency band 27 Hz to 33,000 Hz sensitivity 90 dB impedance 8 ohms crossover frequency 350 Hz/4 kHz dimensions W368 x H1135 x D563 mm weight 72 kg/unit
Speaker cable, 2.9 m pair, pure silver coated, 5N oxygen-free copper, flat cable with 12 cores arranged in a row. Since it has a structure that can be split into 4 parts, it can also be used by wire. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Maintained. With a crossover of 7000 Hz, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. The exterior has been painted on the front due to scratches and signs of use. Serial 38620 39011 (Tomonori Asaine)
Maintenance Information: 2024.4.16 Maintained (8ohm Attenuator VR Screw Insulated Washer Parts Replacement)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The price has been drastically reduced! 2024/4/17 sales price 278,000 yen This is an advanced model of the company's SACD player with a beautiful blaster white body color. It has a higher fidelity tone than conventional luckstones, and the sound image with high instantaneous power, especially the elasticity in the mid and low frequencies, is attractive. On the exterior, there are scuffs scattered on the top plate and side plate. Serial G11100859D (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player, D/A converter equipped with PCM1792 x 2, W440 x H140 x D383 mm, 15.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/15 sales price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570 Hz, 3.5 kHz impedance 8 ohms allowable input 200 W efficiency 90 dB size W185 ✕ H1,000 ✕ D300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The price has been reduced. 2024/4/19 sales price 178,000 yen Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with each part selector, etc., correction of lever deformation points, replacement of block capacitors 30/30/10/10 μF defects, vacuum tube sockets and RCA jack caulk repairs ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing)
Accessories: Service Manual (English)
Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg
The price has been drastically reduced. 2024/4/18 sales price 118,000 yen This MC boost transformer is ideal for SPUs using the JS transformer TYPE0.32M No. 6600. The sharp high frequencies and the tenacious sound in the mid and low frequencies make the SPU sound even more energetic. There is rust on the exterior due to paint peeling (Murakoshi Yoichi)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: none
Main specifications: boost ratio 31 times with bypass function, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ dimensions W90 x H68 x D88 mm weight 420 g
The price has been reduced. Current belt drive player model for the 2024/4/19 sales price 478,000 yen project. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. Equipped with Ortphone's popular dynamic balance arm RS-309D! (MURAKOSHI Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: instruction manual, stabilizer, power cord, head shell, mounting screws, template, needle pressure gauge, dust cover, EP adapter, gloves
Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
The price has been drastically reduced! 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The price has been reduced! 2024/4/13 sales price 69,800 yen ※It is cheap because it has a tobacco smell. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
The price has been drastically reduced! 2024/4/3 sales price 79,800 yen CASTLE's small studio monitor is in stock for the first time at Hi-Fi. A special version of the model that has received high praise since its inception. Even though it is crowned with a monitor, you can feel the high level of texture unique to being made in England that is easy to listen to. You won't get tired of listening to the supple sounds of vocals and strings. The exterior is a saran net, and there are small scratches on the main body. Serial BJH0009 (Yonejima Satoshi)
Maintenance information: 2024.4.3 sweep test is good
Accessories: saran net
Main specifications: 2-way rear bass reflex type frequency characteristics 60Hz-20kHz output sound pressure level 88dB rated impedance 8Ω W165 x H280 x D235 mm 5.1 kg
The price has been reduced! 2024/4/13 sales price 89,800 yen ※It is cheap because it has a tobacco smell. A network player compatible with Roon Ready and MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. It also plays DSD 22.5 MHz when used as a USBDAC. Since it also has volume, it can also be used as a digital preamp. The exterior has a slight smell of threads and tobacco. Serial 17Y0011 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/13 sales price 2,980,000 yen Maintained with attention to details such as drivers and wiring! The Georgian 4 is attractive for its elaborate horn configuration and beautiful furniture-like design. It is a model with a built-in crispy horn, a structure that creates a unique sound with a rich sense of scale, and the loud sound is truly an American masterpiece, but you can also feel a somewhat English-like sex appeal. *The attenuator has been maintained, but slight chipping occurs when turning due to deterioration of the original winding resistance (Oikawa Tetsuji)
Maintenance information: 2023.9.13 Maintained (828HF disassembly and maintenance: separation from magnetic circuit and diaphragm, magnetic circuit diaphragm maintenance: cleaning of the magnetic circuit, rustproof vibration system, round out, stop noise, T350 disassembly and maintenance: separation from the magnetic circuit and diaphragm, sound pressure difference adjustment: stop noise due to resonance sound generation, elimination of sound pressure drop due to rear sound leakage. Confirm that there are no modifications inside the housing. Remove rust from screws on screw-type terminals, pickle, and polish and clean the receiving side. ATT (x4) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 4-way 15WK, 828HF, T350, X336 (300/3500) approx. W860 x D660 x H1,350 mm approx. 90 kg