*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
Maintained! The successor to the PM-80. MOS-FET is used to create a unique world view with gloss in the mid-range. The plump, thick sound during Class A operation is unrivaled, and you can relax and immerse yourself in the music. On the exterior, there is a feeling of use such as seal marks, dullness, and small scratches on the top plate. Serial MZ009432260139 (Yasuhito Koshihama)
Maintenance information: 2024.2.17 Maintained (all main amplifier board soldering deterioration fixed. Bad output relay contact replacement. Disassemble and sharpen the input switch and apply contact cleaner. (Long time sound check)
Accessories: none
Main specifications: MOS-FET use, AB class switchable, Class A (20W+20W), Class AB (100W+100W) PHONO input (MC/MM switching), W454 x H165 x D380 mm 17.5 kg
※Since it is cheap, it will be handed over as is. A coaxial 2-way speaker that can be enjoyed using sound reflected from the ceiling with a structure directed diagonally upward. You can enjoy playback with Dolby Atmos by adding enabled speakers as height channels based on conventional 5.1 channel and 7.1 channel speaker systems. It can also be used by installing it on a floor-standing speaker such as the company's D-509E. There are scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.24 sweep check OK
Accessories: saran net
Main specifications: sealed coaxial 2-way speaker 6 ohm 83.5dB 70Hz-38kHz W142 x H136.5 x D238.5 2.2 kg
※Since it is cheap, it will be handed over as is. An attractive subwoofer with a tight, speedy bass range based on time domain theory. The sound that emits 360 degrees is a convenient item with a high degree of freedom of installation. There are scratches on the exterior. Serial Z0C00005 (Tamura Eiji)
Maintenance Information: 2024.4.24 Sweep Check KoK
Accessories: instruction manual, power cable
Main specifications: 16 cm subwoofer 16 cm (dual voice coil unit) playback frequency band 40 Hz to 200 Hz rated output 30 W x 2 crossover 40 Hz to 200 Hz (continuously variable) power consumption 46 W size W236 x H354 x D301 mm mass 16.2 kg
Maintained! DENON's vintage pre-main. It has a sense of transparency, three-dimensionality, and sound field that you wouldn't think of an amp from the 70s. Also, be sure to try out the deep and tasteful tuning that you can never enjoy with the company's current models. The cost performance is high! You can see a feeling of use such as appearance, dullness, stains, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.24 maintenance completed (switch disassembly contact polishing, contact cleaner application) 2013.2.19 maintained (54 deteriorated transistors and capacitors replaced/use of nichikon MUSE, etc., RCA terminal replacement, speaker terminal replacement, input/output waveform confirmation, sound output test OK)
Accessories: copy of instruction manual
Main specifications: pre, main separable 32W+32W (8Ω) PHONO2 system (mm) W370 x H141 x D310 mm 8 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 40,000 yen*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is excellent for reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
The price has been drastically reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/15 sales price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
The disposal price has been reduced (member prices are not applicable). 2024/4/20 sales price 168,000 yen with original box. A highly complete pre-main amplifier featuring Marantz's clear, glossy expression. The range is wide and thick, and you can choose any music genre. The fact that it supports balanced input is also attractive. There is a small scratch on the lower part of the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 100W+100W, 3 line inputs, 2 tape terminals, PHONO (MM/MC) balance input, W440 x H165 x D444 mm, 26 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/17 sales price 498,000 yen The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is a masterpiece that gives off a unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
※1 bottle only. Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.4.23 Maintained (diaphragm installation adjustment, replacement of the following parts. DCR (54871, 5.7 ohm diaphragm, no scratches)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Genuine Rin Japan A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
A model developed for the digital AV era by applying anti-magnetic treatment to the NS-10M. The clear high frequencies stretch comfortably with less color quality. It is useful for a wide range of applications, such as those who are worried about space and for subsystems. There are small scratches and a feeling of use. Serial 104369A, 104369B (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speaker sealed type 8 ohm sound pressure 90 dB W215 x H382 x D199 mm 7.0 kg
Caster specification! TAOC theater youth HT series wide rack. It also has sufficient load carrying capacity, so even those with large devices can use it without worry. Other than one scratch on the pillar, the condition is pretty good. *Shipping costs will be estimated separately. (FUJISAWA KOSHI)
Accessories: instruction manual, felt, logo seal, hex wrench
Main specifications: load capacity 200 kg/1 shelf spacing 180/230 mm W1,680 x H590 x D550 mm weight 65 kg
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: original box spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
A pair of 2 corian boards with unknown details seems to be just the right size for small speakers, etc. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W180 x H7 x D270 mm 0.6 kg (actual measurement)
PSE standard product 4-prong power strip The sound is lively and the music is dynamic. The spread of sound increases, and an image of the sound spreading throughout the room and the body being wrapped in sound comes out. There is a feeling of use on the exterior, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: none
Main specifications: cable part 75 cm, total length approx. 90 cm
※Only 1 interconnect cable is a 0.4 m three-core line cable with no terminals. There are exterior, feeling of use, small scratches, scuffs on the sheath, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.9 continuity confirmed
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. There are dullness and small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
Speaker selector that can be switched by operating a remote control. It is a 3-system switchable type using a large speaker relay, and can also be switched with the main unit button. The exterior is scratched and dull, and there is a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: remote control power cord
Main specifications: 3-system switching W297 x H79 x D137 mm 1.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/29 sales price 128,000 yen A digital amplifier equipped with a Tripath class T PWM amplifier IC. It beautifully expresses the sense of energy and description. Gain can also be switched on the back, and it is compatible with a wide range of input sources. The exterior is dull and there are scratches on the top of the front panel. Serial 090120022 (Tomonori Asaine)
Maintenance information: 2024.2.27 sound output confirmed
Accessories: power cord instruction manual
Main specifications: output 150W+150W (8Ω) 240W+240W (4Ω) W420 x H98 x D395 mm weight 13 kg
The price has been reduced. 2024/4/16 sales price 54,800 yen Marantz network player compatible with network audio, streaming, AirPlay2, Bluetooth, and USB memory, and is easy to use. PCM supports playback up to 192 kHz/24 bit, and DSD supports playback up to 5.6 MHz. The DAC is equipped with an ES9016K2M compatible with high-resolution sound source specifications similar to the ND8006. There is a slight feeling of use such as small scratches on the top plate. Serial BBL36190200699 (Mizushima Itsuro)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: DSD 2.8/5.6 MHz compatible PCM 192 kHz/24 bit Playback frequency range 2 Hz to 100 kHz W440 x H106 x D371 mm (without antenna) 6.6 kg
A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
Maintained! Comes with stand (DK-8000). A model that has improved the network box of the Diaton 50th anniversary model DS-8000. I am overwhelmed by the clear, detailed treble from Pure Boron and the thick mid-low range compared to the 2S-305 broadcast monitor. Also, the quick start-up sound, which is unimaginable from its size, is excellent. There is a feeling of use in appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.10.21 maintained (exterior stand network exterior cleaning/large scratch filler repair/line scratch simple touch up (repair marks remain) saran net stain/frame cleaning mid-edge softening treatment unit detachable one-sided tweeter disassembly and disconnection repair)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, floor type, anti-magnetic type, 5 ohm 35 Hz to 40,000 Hz 93 db/w/m main unit W500 x H870 x D442 mm network box W370 x H130 x D287 mm weight body 58 kg, network 8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The price has been drastically reduced! 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
The price has been reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. The exterior has a feeling of use such as dullness and small scratches. Serial 1298721 (Hiroki Aso)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cable
Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The price has been reduced. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been reduced! 2024/4/20 sales price 39,800 yen maintenance completed item! It looks like a Class A amplifier, and an unmistakable sound pops out from the moment it starts up. Furthermore, it is an attractive car with a glossy high range and a mellow mid range, making the whole sound brighter. The exterior has small scratches and dullness over time. ※The side panel is missing. Serial 308241173 (Yamato Yuki)
Maintenance information: 2023.11.13 maintained (main board solder repair PHONO earth terminal replacement speaker relay deterioration replacement RECOUT selector SW disassembly contact grease coating speaker switching SW disassembly contact cleaning idling adjustment sound output confirmation for each input/output connection)
(Explanation of specifications) There is rattling in the volume knob, but it is not a malfunction due to structural rattling
Accessories: copy of instruction manual
Main specifications: output level 90W+90W, medium output, pure A class, high output, non-switching, class A operation, phono MM/MC switching, dimensions W470 x H167 x D400 mm, weight 12 kg
2022/5/18 Maintenance completed. An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.5.18 maintenance (1/4 W resistor added, AC cord replacement/side lamp replacement, electrolytic capacitor 100 μF replacement, oil capacitor 0.01 μF replacement, electrolytic capacitor 40 μF replacement, block capacitor 40/20/1000 μF replacement, electrolytic capacitor 1000 μF addition, resistance 1W and 1/2 W replacement, vacuum tube socket and RCA jack caulk repair . Operation has been checked with AC 100 to 117 V.)
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
* Source Direct SW cover is missing and cannot be used, so it is cheap (it is off). Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. Scratches, dullness, stains, and a feeling of use can be seen on the exterior and front edge (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 maintenance completed (select switch disassembly contact polishing grease applied, direct idling adjustment to the side where SD switch tone can be controlled (using repair auxiliary parts) operation tested)
Accessories: copy of instruction manual
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Maintained! The 306 series was supported as a pure audio entry model. It has plenty of phono circuits, is MM/MC compatible, and impedance can be adjusted. Clear, high quality sound quality with W super servo system. I feel that the sound quality, which has a slight core, is good in this era. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.22 maintenance completed (mode, recout, input, subsonic, cartridge, phono selector switch disassembly, polishing grease application, replacement of all indicator lamps, solder repair, pin jack polishing, internal inspection and cleaning, each volume, switch cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: PHONO (MM/MC) 2 system frequency characteristics 0.8 Hz to 170 kHz dimensions W480 x H100 x D403 mm weight 10.5 kg
Maintained! The PRA-2000ZR is a control amplifier specializing in records, which has a reputation for phono circuits. The sharp sound quality of the MC is attractive. It is an MC2 system/MM1 system, and PHONO1 incorporates a pure focus MC transformer and PHONO2 incorporates a FET configuration head amplifier. The exterior has dullness and small scratches. Serial 6101100050 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (equalizer board repair, transistor replacement, 24V regulator replacement, solder repair, each volume switch cleaning, internal inspection, cleaning, each input/output confirmation, operation inspection tone, there is a popping sound when SW is on and off, but there is no sound interruption, etc.)
Accessories: copy of instruction manual
Main specifications: PHONO3 system (PHONO1/MC PHONO2/MC PHONO3/mm) real-time tone control equalizer amplifier part dimensions W462 x H145 x D385 mm weight 10.6 kg
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
The 3rd generation model of the S10 series. Equipped with analog waveform reproduction technology AL24 Processing. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Hiroki Aso)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations; if it breaks down in the future, pickups cannot be obtained loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg
Comes with original box A CD player limited to 250 units sold as a memorial model for the 10th anniversary of the establishment of SOULNOTE. Equipped with a dual TI stereo DAC “PCM1792A,” L/R are completely separated. This model achieves a delicate and majestic dynamic range by configuring a perfectly symmetrical balance circuit. The exterior is also good with no particularly large conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual, power cable, spike, original box
Main specifications: Dynamic range 96 dB total harmonic distortion ratio 0.0022% channel separation 98 dB digital filter 24 bit 8 times oversampling analog filter 3rd order passive type W430 x H109 x D393 mm (when spikes are attached) weight 9.0 kg
Maintained. An attractive pre-main amplifier with a thick sound that is a bit different from the current Lux. It is a high performance amplifier equipped with a Plus-X power supply with ample stabilization control and a phono straight function. It is a model that is compatible with MM/MC and is easy to use. There is a feeling of use on the cabinet, such as scratches and chipped veneers. Serial A2503701 (Mizushima Itsuro)
Maintenance information: 2024.4.4 maintenance completed (disassemble all lever switches, polish contacts, apply contact cleaner, replace defective output relay contacts, replace power lamp, polish input/output pin jacks)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) W464 x H156 x D332 mm 11 kg
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. The exterior has small scratches, dullness, and a feeling of use (Hiura Katsuji)
Maintenance information: 2020.9.7 maintenance completed (full arm disassembly, rewiring, arm bearing outer race cleaning, bearing ball replacement, oil lubrication, motor shaft oil lubrication, semi-fixed VR replacement for rotation adjustment, rotation adjustment implementation, needle pressure adjustment VR and operation SW disassembly, cleaning, auto sensor position adjustment, operation confirmation of each function, sound output check)
Accessories: M44G
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained. With a crossover of 7000 Hz, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. The exterior has been painted on the front due to scratches and signs of use. Serial 38620 39011 (Tomonori Asaine)
Maintenance Information: 2024.4.16 Maintained (8ohm Attenuator VR Screw Insulated Washer Parts Replacement)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
The price has been reduced! 2023/4/16 sales price 668,000 yen pure A grade stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. Not only is the sense of power and powerful bass, but the contoured, stretchy mid-to-high range is still appealing. There are scratches and scratches on the exterior. Serial F4Y151 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord (general purpose)
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
Maintenance such as replacing capacitors and replacing deteriorated parts was completed in 2015/11. It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. There is a feeling of use such as scratches and lettering disappearing on the chassis (Mizushima Itsuro)
Maintenance information: 2015.11.19 maintained (EL.C12μF1 exchange/EL.C100μF 2 replacement, R2W 4 replacement, R1/2W 4, AC cord exchange/RCA jack caulking and polish repair/VT socket caulking repair*Other parts check (OIL.C has been unified to orange drop))
Accessories: Copy of instruction manual (English)
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg