- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- A network transport equipped with functions comparable to U2. A CNC-machined aluminum front panel is used for the all-aluminum housing to enhance structural rigidity and shielding. A new surface finish adopted from the higher-level model LUMIN P1 has been applied. There are no noticeable scratches on the exterior. Serial 60230322-09-1001799 (Tamura Eiji) Maintenance information: 2026.9.11 operation confirmed Accessories: instruction manual, power cable, connection cable Main Specifications: Compatible Formats DSD DSF (DSD) DIFF (DSD) DoP (DSD) PCM FLAC Apple Lossless (ALAC) WAV AIFF Compressed Audio MP3 MQA Compatible Streaming Service UPnP (OpenHome) Tidal Tidal Connect Qobuz Roon Ready Spotify Connect AirPlay TuneIn compatible sampling/bit rate PCM 44.1kHz-768Hz 16-32bit (stereo) DSD DSD64-512 (stereo) input 1000Mbps RJ45 x 1 USB storage (single partition FAT32 NTFS exFAT) digital output USB DSD64-512 PCM 44.1kHz-768kHz 16-32bit OPTICAL DSD64 (DoP) PCM 44.1kHz — 192kHz 16-24bit COAXIAL SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit BNC SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit AES/EBU DSD64 (DoP) PCM 44.1kHz-192kHz 16-24bit Dimensions W300 ×D244×H60mm weight 2.5kg
- description
- Maintained by the manufacturer! 2026.9.10 Heavyweight brass stabilizer included (external product) A masterpiece arm made in Japan made of stainless steel and workmanship accuracy. The clear tone that does not make you feel incidental sounds, the breadth and ease of settings, and excellent tracing ability in the dynamic balance type are excellent. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: Manufacturer maintained (needle pressure scale ring disassembly, grease UP adjustment, click pin adjustment, receptacle 4P replacement, rotating part inspection adjustment, lifter disassembly silicon UP reassembly, cleaning completed, needle pressure confirmed) Accessories: stabilizer, phono cable, instruction manual (copy) Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm stabilizer height 67 mm diameter 65 mm
- description
- Maintained by the manufacturer. By equipping the DAC with 2 Barbrown PCM1738 channels, it is possible to achieve both low noise and improved reproduction accuracy while improving the clear expressiveness of the sound field. Try it out with a classical symphony. There are conspicuous scratches on the exterior and front window, and a feeling of use such as dullness, stains, and abrasions can be seen (Murakoshi Yoichi) Maintenance information: 2026.9.10 manufacturer maintained (display part window cover re-adhesive fixing, CD tray part grease reapplication, sound output operation test) 2024.12.11 manufacturer maintenance (RCA terminal part disconnected, RCA terminal replacement (compatible product) operation confirmed) 2024.11.19 operation confirmed (due to the specifications of the universal remote control, please press the CD button during initial operation. (Press and hold SW to open the tray) Accessories: remote control, instruction manual, power cord Main Specifications: DAC: Barbrown PCM1738×2 Analog Output: Unbalanced 2.0VRMS Digital Output: Coaxial SPDIF: 75Ω Balance AES/EBU: 110Ω Optical TOSLINK Output Impedance: 100Ω Frequency characteristics: 20 Hz to 20 kHz (+0/-0.2 dB) SNR: 105 dB Distortion rate: 0.01% or less (20 Hz to 20 kHz) W430×H100×D385mm 8kg
- description
- Inexpensive due to missing flanges. A classic tweeter used in JBL's successive speakers. Cymbals and wind instruments are vividly played back with a clear, dry sound. Paint peeling and rust can be seen. Serial 111275/111277 (Takasaki Atsushi) Maintenance information: 2026.9.10 Maintained (speaker terminal insulation bushing replacement mass tightened, vibrating plate installation adjustment) Accessories: none Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg
- description
- An African paddock is used as a material used for musical marimbas. It is vibration-resistant and creates a tight sound. It is recommended not only for the NS-2000, but also as a mid-size stand for the NS-1000M, etc. There are dents on the exterior, in the center of the lower row, and small small scratches scattered on the other corners (Murakoshi Yoichi) Accessories: none Main specifications: W440 x H250 x D365 mm 9 kg
- description
- Maintained! It has an elegant and glossy tone, and the output sensitivity can be selected from 3 levels. Combinations with 405 are common, but 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. (FUJISAWA KOSHI) Maintenance information: 2026.5.15 Maintained (replacement of coupling tantalum capacitors, bypass capacitors, etc. within each board. Each rotary switch is balanced VOL cleaned. Power Switch and Spark Killer Capacitor Replacement (*Since this is an early model, there are sound leaks even in VOL0) Accessories: copy of instruction manual, power cord, connection cord Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4 kg
- description
- Sony's 1TB HDD internal audio player. You can enjoy not only high-resolution sound sources such as DSD 5.6 MHz or 192 kHz/24 bit, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. Serial 2200545 (Fujisawa Yukishi) Maintenance information: 2026.9.11 operation confirmed Accessories: remote control, instruction manual, power cord, connection cord Main specifications: built-in HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency characteristics 2Hz-80kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
- description
- Comes with original box An introductory model for Marantz CD players. Equipped with a 32-bit stereo D/A converter. With the digital filter switching function, you can switch between filter 1 (slow roll off) and filter 2 (sharp roll off) according to the music to be played and your preferences. The exterior is generally good (Murakoshi Yoichi) Maintenance information: 2026.9.6 sound output confirmed Accessories: remote control, instruction manual, power cord, original box Main specifications: audio output terminal/analog unbalance x 1, coaxial digital x 1, headphone x 1, other input/output terminals, USB (front) x 1, Marantz remote bus (RC-5) input/output x 1, W440 x H105 x D341 mm 6.5 kg
- description
- It is a small, vertical, twin woofer+bass reflex that reproduces energetic, clear, and strong bass. Use it for low-frequency reinforcement of small speakers or theater systems. Serial 3049710992 (Fujisawa Yukishi) Maintenance information: 2026.9.11 operation confirmed Accessories: No accessories Main specifications: crossover 50 to 200 Hz maximum output 60 W W206 x H436 x D332 mm 9.3 kg
- description
- This is an ADK 4-tier rack. It is stackable and can be easily expanded. The back side is free, so wiring can be carried out easily. There are line scratches and bumps on the exterior. (TAMURA Eiji) Accessories: none Main specifications: W575×H790×D500mm
- description
- An audio board made by WELLFLOAT. By treating the board surface with a special coating (well coating), it is scratch-resistant, and contact friction is improved by increasing the adhesion force acting between molecules. Unnecessary boundary vibrations generated on the contact surface with the board are suppressed, smoothly transmitted to the board, and accurate floating with a sense of stability is achieved. There are multiple fine line scratches on the top plate (Mikito Eiki) Accessories: none Main specifications: load capacity 5 kg to 30 kg W500 x H60 x D400 mm 7.0 kg
- description
- *Needle cover is missing. A limited-edition model that uses a composite ultra-fine wire made of pure gold and 6N copper for the power generation coil to achieve an analog sound that plays pure and rich musical emotions. The amount of information unique to a spacious high-end aircraft is truly a word (Murakoshi Yoichi) Maintenance information: 2026.9.5 sound output confirmed Accessories: none Main specifications: MC type output voltage 0.15 mV playback frequency 20 Hz to 70 kHz impedance 40 ohms special elliptical needle needle pressure 1.3 g dead weight 7 g
- description
- The higher model of the DL-103. Wide range has been measured, and 20 Hz to 70 kHz has been achieved. Delicate, wide, and powerful sound quality. Serial 3948 (Murakoshi Yoichi) Maintenance information: 2026.9.9 sound output confirmed Accessories: needle cover Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
- description
- ※There is no problem with operation, but since the cantilever is curved, it is sold at a low price. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. Serial 9342 (Yamato Yuki) Maintenance information: 2026.8.20 sound output confirmed Accessories: needle cover Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- Victor headshell from the 70s. The screw hole is long, and the overhang can be easily adjusted. Externally, there are scratches around the screw. (TAMURA Eiji) Maintenance information: 2026.9.11 operation confirmed Accessories: none Main specifications: 9.5g dead weight
- description
- Exclusive top of the line preamp. The sound is full of power, the sense of sound pressure is very high, and since the SN is good, the sense of localization is excellent. There is little dramatization in the sound, so the speaker's characteristics come out clearly. Although it is a preamp, it also has a solid weight, and I am amazed at how high it is built. There are deep scratches on the exterior and front panel, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi) Maintenance information: 2026.9.4 operation confirmed Accessories: instruction manual Main specifications: complete mono-construction structure, 2 balanced inputs, 2 pre-out systems (XLR/RCA), PHONO (MM) input included, W460 x H158 x D446 mm, 27.5 kg
- description
- ※Since there is no case, it is inexpensive. Output transformer pairs for sale single, finemet core output 24W, primary: 3 kΩ, secondary: 4-6-8-16 Ω, frequency characteristics, 8 to 80 kHz, primary inductance, 32H, primary side winding resistance 106 Ω (measured 105.5/105.7 Ω), secondary side winding resistance 0.38 Ω (actual measurement approx. 0.4 Ω), W85 x H105 x D81 mm, approx. 1.7 kg/pcs with specifications (Yosuke Kojima) Accessories: specifications
- description
- * It is inexpensive due to uncased specifications. The model number is expressed as “FM-600-10k,” but it was determined to be FM-600-10kCT from the number of terminals and measured values. Input transformer pair sales primary: 0-CT-600Ω secondary: 10 kΩ split configuration transformer ratio 1:4 frequency characteristics 3 to 40 kHz (-1 dB) primary inductance 60H primary winding resistance 14.5/14.5 Ω (measured 14.5/14.5 Ω, 14.6/ 14.5 Ω) Secondary winding resistance 260/260 Ω (measured 262.7/262.2 Ω, 262.4/262.0 Ω) W52 x H78 x D43 mm 0.48 kg (actual measurement, not including protrusions) with specifications (Kojima Yosuke) Accessories: specifications
- description
- Input transformer pair sale primary: 30-250-600 Ω secondary: 100 kΩ frequency characteristics 20 to 20 kΩ diameter 44 x H65 mm (not including protrusions) 0.23 kg/piece, no mounting screws on one side, there are abrasions and dullness (Kojima Yosuke) Accessories: none Main specifications: DC resistance value between terminals using a simple tester 3-8:30.4/30.7 Ω, 3-7:3.7/3.3 Ω, 3-1:53.9/54.3 Ω, 4-6:6.21k/6.21kΩ
- description
- Input transparent pair sales primary: 10 kΩ, secondary: 40 kΩ CT frequency characteristics 30 to 15 kHz boost ratio 1:2 W33.5 × H41.5 × D22 mm (not including protrusions) 0.12 kg/piece (Kojima Yosuke) Accessories: none Main specifications: (measured resistance between terminals by tester) 1-3:2.61 k/2.58 kΩ, 4-5:1.28 k/1.26 kΩ, 4-6:2.56 k/2.53 kΩ
Manufacture:不明
Price: JPY 7,273(pair)
- description
- A metal speaker stand from an unknown manufacturer. It is also tall and is designed to be a good size for small bookshells, etc. (FUJISAWA KOSHI) Accessories: No accessories Main specifications: Top plate: W160 x D160 mm Overall: W250 x H590 x D300 mm Weight 5.5 kg/bottle
- description
- The disposal price has been reduced. Member prices are not applicable. 2026/9/6 sales price 4,000 yen A reasonable speaker stand from Hayami Industries. It is designed for installing small speakers. Since it is lightweight, you can easily change the position of the stand, and it is an easy-to-use stand. There is a feeling of use on the exterior, such as dullness, etc. ※The DIATONE emblem is attached (Asaine Tomoho) Accessories: none Main specifications: bottom plate dimensions W230 x H450 x D295 mm Top plate dimensions W190 x D230 mm weight 4 kg
Manufacture:TangBand
Price: JPY 7,273(pair)
- description
- The disposal price has been reduced! (Member prices are not applicable) 2026/7/6 sales price 12,000 yen*Currently sold. Tamban's full range of 10cm ferrite titanium cones. Not only does the high range stretch smoothly like a titanium cone, but it also stretches thick in the low range. The exterior is dull and has a feeling of use (Takahashi Nobuyuki) Maintenance information: 2026.8.18 Operation confirmed Accessories: original box Main specifications: impedance 8 ohms playback frequency band 70 to 20 kHz output sound pressure level 89dB input 25W baffle aperture diameter φ95 mm weight 1.803 kg
- description
- Famous machines are back! This time, due to network failure, some INTERTECHNIK AUDYN-CAP capacitors have been replaced. Since the goal is to comply with the original as much as possible, the silver capacitors are used as they are. Thorough maintenance was carried out from the exterior to the interior, such as cabinet polishing, repainting, unit maintenance, attenuator cleaning, and terminal replacement. We are particular about not only the sound quality, but also the visuals, from the feel of the knobs, the texture of the wood grain, to the frames and screws. It is a monitor speaker that was also used by the Swedish National Broadcasting System and the Finnish National Broadcasting System. The high quality shines through, such as the brillium diaphragm unit, which has become rare in modern times, and the brilliance of the sound due to the precise cabinet (Mizusaki Ryo) Maintenance information: 2026.6.28 maintained (exterior repair/polishing/full coating, unit frame painting, network maintenance: frequency characteristic check/ATT cleaning/capacitor replacement (for low range/high range), terminal replacement, unit detachment) Accessories: none Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20000 Hz crossover frequency 500 Hz/6000 Hz impedance 6 Ω output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
- description
- The disposal price has been reduced! (Member prices are not applicable) 2026/6/26 sales price 39,800 yen ※Currently sold. 3-way digital channel divider The frequency, slope, and level of the low cut filter and high cut filter can be set respectively, and the slope can be freely selected from 6 types. Serial 00008601 (Fujisawa Yukishi) Maintenance information: 2026.6.26 operation confirmed Accessories: instruction manual, power cord, original box Main specifications: number of audio input channels 2 terminals type XLR, electronic balance microphone input channel number 1 XLR balance number of audio output channels 6 terminals shape XLR balance AD-DA conversion 24 bit, 48 kHz frequency characteristics 20 to 20 kHz W483 x H45 x D150 mm 2.3 kg
- description
- The price has been drastically reduced. 2026/9/5 sales price 898,000 yen Maintained! Macton high end tube control amplifier. A parallel SEPP circuit is used. This model was developed in search of the best sound quality in the world. 12AU7 x 2 and 12BH7 x 8 are used for the vacuum tubes used. Equipped with a high-capacity high-voltage electrolytic capacitor, you can enjoy sound quality without deteriorating even when running for a long time. The sound is strong and firm even though it is a vacuum tube. There is a thread on the acrylic part of the exterior. Serial 21E01 (Tamura Eiji) Maintenance information: 2026.9.5 Maintained (reinstalled due to disconnection of panel mounting screws. Reinstall the chassis because it comes with mounting screws. Replacement of missing and damaged screws. Solder correction. Reinstall the suge nut. Condenser tilt correction Voice check for each input and output. The heater in this model has alternating current ignition) Accessories: power cable Main specifications: vacuum tube 12 AU7 x 2 and 12 BH7 x 8 using 7 line inputs, frequency characteristics, 10 Hz to 100 kHz, W465 x H170 x D370 mm, weight 19 kg
- description
- The price has been drastically reduced. 2026/9/7 sales price 178,000 yen Maintained! A model commemorating the 50th anniversary of the Diaton Workshop. Unlike conventional diamond-tone sounds, which have a glittering image, the soft, and definitely thick English bass is attractive. The treble doesn't stretch so sharply, so it's a very easy speaker to hear. There are small tears, small scratches scattered on the net, and the clear cap is missing at only one part of the speaker terminal. Serial 12364, 12380 (Fujisawa Yukishi) Maintenance Information: 2026.9.7 Maintained (woofer edge softening treatment. Unilateral tweeter disassembly and disconnection repair Lead additional wiring assembly. centering adjustment. Operation confirmed.) Accessories: saran net Main specifications: 2-way anti-magnetic type, 16cm cone woofer, 4cm cone tweeter, 6Ω playback frequency band, 35Hz to 40kHz, output sound pressure level, 85dB, crossover frequency, 1.5kHz, maximum input 150W, W266 x H410 x D310 mm, 14 kg
- description
- The price has been drastically reduced. 2026/09/03 sales price is 298,000 yen. Premium edition with beautiful and elegant piano paint. This coating has also been used in the AR series, which is a higher-level model. By selecting high-quality materials and high-precision Japanese woodworking technology, it is possible to play natural, high-quality music. The lower part of the front is chipped, and there are many line scratches on the top plate (Daiki Goto) Maintenance information: 2026.9.3 operation confirmed Accessories: none Main specifications: used unit/woofer 165 mm cone type x 2, mid-range 130 mm cone type x 1, tweeter 25 mm soft dome type x 1 · 19 mm dome type x 2 impedance 4 ohms maximum input 100 W output sound pressure level 90 dB (2.83 V/1 m) playback frequency band 45-45,000 Hz W255 x H990 x D415 mm approx. 32 kg
- description
- The price has been drastically reduced. 2026/8/11 sales price 99,800 yen Maintained! An improved model of the TSD-15 for consumer use. The low and high frequencies are just the right amount, and the density and extrusion of the midrange is amazing. The cantilever bending has been corrected, but there is still some bending left. Serial 2983 (Fujisawa Yukishi) Maintenance information: 2026.8.11 Maintained (broken coil winding, cantilever bending, damper replacement, cleaning) Accessories: No accessories Main specifications: MC type 1 mV single crystal diamond super fine line stylus needle pressure 2.0 to 2.5 g impedance 20 ohms dead weight 12.0 g
- description
- The price has been drastically reduced. 2026/9/6 sales price 128,000 yen genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Of course, it is compatible with LINN systems, and is equipped with digital upsampling output and variable line level output functions that were not found in the KLIMAX DS and AKURATE DS (permanent future) Maintenance information: 2026.9.6 operation confirmed Accessories: remote control, instruction manual, power cable, connection cable Main specifications: Support files FLAC, WAVE, MP3, AIFF compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits W381 x D360 x H80 mm 4 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
