The price has been drastically reduced. 2026/7/29 sales price 99,800 yen This is the first time in stock in 5 years! This is a set of PD-100 screwdriver and PH-101 horn. Aluminum wire is used for the voice coil, and aluminum light alloy foil is used for the diaphragm to achieve a natural sound that feels good on the ears. The stay is corroded, and the main body is scratched over time (Daiki Goto)
Maintenance information: 2026.7.29 Operation confirmed
Accessories: none
Main specifications: PD-100/throat aperture diameter 19 mm 8 ohm playback frequency characteristics 500 to 18,000 Hz output sound pressure level 104.5 dB crossover frequency 500 Hz diameter 132 x depth 120.5 mm 4.8 kg PH-101/multi-cellular horn throat hole diameter 19 mm cutoff 350 Hz W435 x H194 x D391 mm 4.4 kg
The price has been reduced. 2026/7/1 sales price 2,000 yen. Pioneer carbon fiber molded headshell Simple and easy to use design. There is a feeling of use on the exterior, such as slight dullness and small scratches (Murakoshi Yoichi)
Maintenance information: 2026.6.30 Continuity confirmed
Accessories: none
Main specifications: carbon fiber molding dead weight 9.5 g
Currently sold. It is a cassette deck that uses a digital processing system to convert analog music signals into digital signals and realizes wideband playback. Furthermore, there is also a digital input (OPTICAL), so you can record an analog/digital sound source with clear sound as it is on a cassette. The exterior has a feeling of use such as dullness and small scratches (Murakoshi Yoichi)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: remote control
Main specifications: double reverse deck, 1 head dimensions W420 x H125 x D 250 mm, weight 4.4 kg
The price has been reduced. 2026/8/7 sales price is 3,000 yen. Pioneer wooden speaker stands are now in stock. Both the size and height of the top plate are suitable for small speakers. There are scratches and dullness (Daiki Goto)
Accessories: none
Main specifications: top plate W200xD200mm W310 x H550 x D350 mm weight 5.3 kg
The disposal price has been reduced (member prices are not applicable). 2026/6/19 sales price 3,000 yen*Currently sold. Compact center speaker The front of the speaker uses a clean design with no unevenness when the grille is attached, and combined with the slim form, it achieves a more natural spread of sound (Eternity Miraito)
Maintenance information: 2026.6.19 Operation confirmed
Accessories: none
Main specifications: sealed bookshelf type 6Ω 84dB frequency characteristics 50Hz to 40kHz W285 × H123 × D162 mm 2.4 kg
The price has been drastically reduced. 2026/4/2 sales price 2,500 yen ※There is no operation problem, but it is sold as is. It is a single-unit model of the S-ST05, and was sold as a center for surround playback with the S-ST05. Be sure to build a compact surround system. There is a feeling of use on the exterior, such as threads and dullness (Mizusaki Ryo)
Maintenance information: 2026.4.1 sound output confirmed
Accessories: original box, bracket
Main specifications: impedance 8 ohms, W230 x H140 x D 163 mm, weight 2.8 kg
The price has been reduced. 2026/6/14 sales price 3,000 yen. Pioneer MM Cartridges It uses an aluminum light alloy pipe cantilever, and the impression is that the range is relatively wide for its age. The exterior has a feeling of use such as dullness and rust (Matsumoto Tsuyoshi)
Maintenance information: 2026.6.14 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
The price has been reduced. 2026/7/23 sales price 99,800 yen. Maintained in 2025. It features a sound that combines transparency and thickness. It comes with a volume and can be directly connected to a CD player, etc., and is also recommended as a separate introductory machine. There is a dent on the back of the right side panel (Murakoshi Yoichi)
Maintenance information: 2025.8.21 maintained (maintenance details ① main volume dismantling, cleaning, selector switch disassembly and polishing ③ speaker, meter switch disassembly, polishing, output relay replacement, selector relay replacement, solder repair, interior and exterior inspection, cleaning, operation confirmation)
Accessories: none
Main specifications: 200W+200W (8Ω) dimensions W457 x H154 x D430 mm weight 20.9 kg
※It is cheap because it is in poor condition. 2 bottles only. It is a very convenient and useful item for installing medium sized speakers, etc. It seems to be suitable for NS-1000M etc. There are tape marks and noticeable corner chips. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100 x H180 x D365 mm approx. 4.7 kg
Maintenance has been completed, including the creation of a new dust cover, 23 capacitors replaced, and a full tonearm overhaul. It is a model that has refined sound quality by reflecting sound quality improvement technology obtained with advanced models. The arm, which moves with a unique smoothness due to oil braking, is impressive. The moist, well-organized mid-range is attractive, and the overall sound quality is warm and plump. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.7.13 Maintained (tone arm disassembly, cleaning, lubrication, adjustment. Clean and lubricate the lifter area. Tact switch contact correction.
Turntable motor lubrication Electrolytic capacitors - 23 pieces replaced. Turntable stickiness removal Turntable seat replacement. (Inspection of each part, cleaning, operation test)
Accessories: copy of instruction manual
Main specifications: quartz lock direct drive semi-auto player level variable silicon oil braking system straight arm W490 x H190 x D401 mm 14.6 kg
The disposal price has been reduced! (Member discounts are not applicable) 2026/4/7 sales price 2,000 yen PIONEER black shell with unknown details. I think it's made of plastic. The exterior has dullness etc. (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.7 continuity confirmed
Accessories: none
Main specifications: 10 g dead weight
Every detail, such as replacing 23 electrolytic capacitors, disassembling and cleaning the tonearms, and lubrication, has been maintained, and a new dust cover has also been created. It is a model that has refined sound quality by reflecting sound quality improvement technology obtained with advanced models. The arm, which moves with a unique smoothness due to oil braking, is impressive. The moist, well-organized mid-range is attractive, and the overall warm, plump sound quality is attractive. There are small scratches, dullness, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2026.7.8 Maintained (tone arm disassembled, cleaned, lubricated, adjusted. Replace the balance weight attachment due to sagging and the bushing deteriorating over time. Tact switch contact correction. Lifter part cleaning and lubrication. Replace 23 electrolytic capacitors. Removes stickiness from turntable sheets (Inspection of each part, implementation of operation tests, creation of new dust covers)
The price has been reduced. 2026/4/16 sales price 3,000 yen Pioneer MM cartridge PC-110. It feels like the range is quite wide for the age group. Since it is lightweight and easy to match with various tone arms, it is also recommended for straight arms, etc. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.16 sound output confirmed
Accessories: none
Main specifications: Power generation method mm type output voltage 3.5 mV 5 cm/sec needle pressure 1.8 to 2.5 g (optimal 2.2 g) playback frequency band 15-25,000 Hz± 3 dB dead weight 5.7 g
The disposal price has been reduced! (Member prices are not applicable) 2026/3/5 sales price 3,000 yen. Pioneer MM Cartridges It uses an aluminum light alloy pipe cantilever, and the impression is that the range is relatively wide for its age. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.4.28 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
The price has been reduced. 2026/4/17 sales price 3,000 yen Pioneer MM cartridge PC-110. It feels like the range is quite wide for the age group. Since it is lightweight and easy to match with various tone arms, it is also recommended for straight arms, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.4.17 operation confirmed
Accessories: none
Main specifications: Power generation method mm type output voltage 3.5 mV 5 cm/sec needle pressure 1.8 to 2.5 g (optimal 2.2 g) playback frequency band 15-25,000 Hz± 3 dB dead weight 5.7 g
Needle cover missing. A cartridge very similar to the Pioneer PC-16. A 1.5 g needle pressure produced a neutral sound (Murakoshi Yoichi)
Maintenance Information: 2026.3.7
Accessories: none
Main specifications: 5g dead weight (actual measurement)
Pioneer MM Cartridges It uses an aluminum light alloy pipe cantilever, and the impression is that the range is relatively wide for its age. The exterior is dull and has a feeling of use (Yamato Yuki)
Maintenance information: 2026.4.22 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
An easy-to-use headshell in Pioneer's basic style. The exterior has a feeling of use such as dullness and small scratches (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.2 continuity confirmed
Accessories: none
Main specifications: dead weight 6 g
This headshell has a basic style and is easy to use. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.3.17 continuity confirmed
Pioneer PP-303 silver model. It is a headshell made with full consideration for acoustic characteristics. The exterior is dull and dirty, and the company name logo is about to disappear (Takahashi Nobuyuki)
Maintenance information: 2026.3.11 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7.0 g
This is a basic style headshell with short fingers. It's also easy to use. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.1.15 continuity confirmed
Accessories: none
Main specifications: dead weight 9 g
Pioneer lightweight shell. It is built with full consideration for acoustic characteristics. The exterior is dull and has a feeling of use (Ryuichiro Kaneko)
Maintenance information: 2026.3.8 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7g
Pioneer lightweight shell. It is built with full consideration for acoustic characteristics. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.3.7 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7g
Pioneer lightweight shell It is built with full consideration for acoustic characteristics. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.2.20 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight g
Pioneer lightweight shell It is built with full consideration for acoustic characteristics. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.2.20 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight g
Pioneer lightweight shell It is built with full consideration for acoustic characteristics. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.2.20 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight g
Pioneer carbon fiber molded headshell Simple and easy to use design. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.2.20 continuity confirmed
Accessories: none
Main specifications: carbon fiber molding dead weight 9.5 g
Pioneer lightweight shell It is built with full consideration for acoustic characteristics. The exterior has a feeling of use such as dullness and small scratches (Matsumoto Tsuyoshi)
Maintenance information: 2026.2.19 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight g
Pioneer carbon fiber molded headshell Simple and easy to use design. You can see a feeling of use such as dullness on the exterior (Matsumoto Tsuyoshi)
Maintenance information: 2026.2.19 continuity confirmed
Accessories: none
Main specifications: carbon fiber molding dead weight 9.5 g
This is a basic style headshell with short fingers. It's also easy to use. The lead wire is missing. The exterior is dull and has a feeling of use (Matsumoto Tsuyoshi)
Maintenance information: 2026.2.19 Continuity confirmed
Accessories: none
Main specifications: aluminum stamping shell dead weight approx. g