Classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: no lead wire
Main specifications: aluminum stamping dead weight 6.8 g
Classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: no lead wire
Main specifications: aluminum stamping dead weight 6.8 g
SPU-GE reprint model, popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Serial 834917 (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: stylus cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
This headshell is machined from hard aluminum to ensure sufficient strength in each part. The simple design is excellent. Dullness, slight scarring (Takasaki Atsushi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: dead weight 14g
This headshell is popular due to its combination with the Technics and SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Comes with a 4g sub weight! This headshell is popular in combination with the SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: weights
Main specifications: Die-cast aluminum, dead weight 10.2 g (+ 4 g)
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
A record player with an excellent sense of stability developed by condensing the high inertia concept realized with the SX-8000 /2 into a compact integrated player. The SME 3010R is mounted to achieve strong, thick, and outstanding analog sound with cuts. The overwhelming performance that brings out the full amount of information on a vinyl record is attractive. The exterior has dullness and small scratches. Serial 09040193 (Yonejima Satoshi)
Maintenance information: 2024.3.23 Maintained (servo board pitch volume center adjustment. Power circuit electrolytic capacitor replacement. Arm weight O-ring replacement. Weight adjustment screw part cleaning. Turntable fixing screw installation rotation, arm operation, voice check)
Accessories: power supply unit, handle, instruction manual, power cord
Main specifications: [AP-M1] belt drive system, 8-pole hysteresis, synchronous motor, CR oscillator, BTL amplifier drive, 33 1/3, 45 rpm switching, ± 4% fine-adjustable size: W463 x H165 x D377 mm weight: 28 kg [3010R] short arm static balance type effective length: 237 mm cartridge mounting weight range: 1.5 to 26 g (cartridge only) 9.5 to 34 g (shell) Including) Variable needle pressure range: 0 to 5 g Slide base: ± 12.7 mm
A heavyweight stand perfect for JBL mid-size speakers. The 3 struts and steel plates are resistant to vibration systems and support clear playback sound. It's the best match for the 4429/4319/4312 series, etc. Good appearance, dullness, and minor scratches (Kobayashi Hitoshi)
Accessories: spike, spike holder, instruction manual, original box
Main specifications: steel bottom plate dimensions W440 x H400 x D370 mm (excluding spikes), top plate dimensions W360 x D293 mm, weight 26 kg/book
Alloy die-cast headshell. I like the simple design. One that is easy to match with various cartridges (Tomoho Asae)
Maintenance information: 2024.3.26 continuity confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
※It is inexpensive because the level is not good. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Asaine Tomoho)
Maintenance information: 2024.3.26 sound output confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
※There is no problem with operation, but since it has an air freshener smell, it is inexpensive and is currently sold. Pioneer synthesizer FM/AM tuner. It is a thin, easy to use, and highly convenient car. Since it is equipped with a memory function, song selection can be carried out smoothly (Oikawa Tetsuji)
Maintenance information: 2024.3.24 Operation confirmed (FM reception OK)
Accessories: none
Main specifications: FM/AM tuner SNR 76dB (MONO) 73dB (STEREO) W420 x H78 x D287 mm weight 2.7 kg
Technics audio case. The sturdy steel box and plastic logo tray can hold 16 cassettes or 7 headshells. The commitment typical of Technics is irresistible. Slightly dull (Murakoshi Yoichi)
Accessories: none
Main specifications: W84 x H140 x D371 mm 1.3 kg
The price has been reduced. 2024/3/15 sales price 69,800 yen Maintained! 50Hz specification * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music) A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (belt replaced. Power cord and phono cable replacement Clean the motor and lubricate all parts. Arm elevation cylinder cleaning grease application. (Since there is no rotation synchronous motor adjustment, it flows slightly)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Tamura Eiji)
Accessories: No accessories
The price has been reduced! 2024/3/17 sales price 2,200 yen triple capsule type keeper TRI-CAPSULE. Up to 3 cartridges with headshells can be stored. It is a capsule with a slit, so the finger part of the headshell can also be stored without difficulty (Asaine Tomoho)
Accessories: none
Main specifications: W185 x H92 x D60.7 mm dead weight 155 g
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
One owner item! MICRO exclusive SAEC arm WE-407/TM The feature is that the execution length is longer to match the MICRO record player. Equipped with a double knife edge with excellent work accuracy and high adaptability, it is an arm that is still valuable as a first-class product. From low-compliance heavyweight cartridges to high-compliance light needle pressure cartridges, it is a talented gem that brings out the capabilities of many cartridges. The exterior is in good condition with no noticeable scratches (Mizusaki Ryo)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: instruction manual, shell, phono cable (6NX/TSW1010)
Main specifications: double knife edge, static balance type, execution length 236 mm, total length 322 mm, overhang 15 mm, cartridge usage range 14-22 g/needle pressure 0 to 2.5 g (including shell), mounting hole 30 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable Sturdy single wire Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
An ultra-compact level that is useful for analog settings. Depending on ideas such as headshells and tone arms, it is possible to make adjustments to favorite systems (Murakoshi Yoichi)
Accessories: none
Main specifications: 13 mm in diameter, 14 mm in height, 5 grams of dead weight
The price has been drastically reduced. 2023/12/29 sales price 8,000 yen. This stand is perfect for small bookshelves, etc. It is designed so that it can be fixed by sandwiching the speaker. The speaker cable can be stored inside the pole, and the width of the top plate and the height of the stand can also be adjusted, making it easy to use and can be installed neatly. The exterior has small scratches, stains, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: aluminum extension, water drop pole, 3 point steel base, top plate, W100 to 220 mm x D 100 mm, height adjustment range 780 mm to 1,140 mm, maximum load 4.5 kg, 4.8 kg
The price has been reduced. 2024/1/12 sales price 2,500 yen Headshell from unknown manufacturer. This is a small hole type screw hole that makes it easy to adjust the overhang. As for the exterior, in addition to dullness, there is a feeling of use where only one lead wire is different (Hiroki Aso)
Maintenance information: 2024.1.12 continuity confirmed
Accessories: none
Main specifications: dead weight 10g
The price has been reduced. 2023/12/27 sales price 12,000 yen*Currently sold. This speaker has a clear and soft sound using the D.D.L cone woofer used in the CX series. There is a good balance between clean mid and high frequencies that you won't get tired of listening to, and low frequencies that are modest yet don't feel unsatisfactory. The exterior is smelly, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.25 Operation confirmed
Accessories: saran net
Main specifications: 2 way 3 speakers, bass reflex type, anti-magnetic design, 6 ohm, 100 W 30 Hz to 60 kHz 83 db/w/m W224 x H942 x D248 mm 10.0 kg
The price has been reduced. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
Coral headshell The weight has been reduced, and the mounting position can also be adjusted, so it is an easy shell to handle (Oikawa Tetsuji)
Main specifications: dead weight approx. 14g
※Set of 2 (not treated as a pair since the internal shape is different between the tubes) KT88 compatible balls, Russian metal brown, base code: 0210/0601 measured value 56/50 (rejection theory 44) with original box ※ measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
※Shipping service. This is a brand new item. Mr. Nagase Muneshige called Nazo Otoko, the host of an audio blog popular among high-end audio users around the country. This book is a compilation of records of 15 years of audio exploration that Mr. Nagase has spelled out on his blog. “Double Woofers,” which was formed in the wake of the JBL 4350, is the origin of its activities, and in addition to high-end amplifiers such as Mark Levinson, Claire, and Goldmund and the JBL 4350, high-end devices coveted by enthusiasts, such as Avalon, Apogee, and Full Epilogue, have appeared one after another. A must-read for high-end audiophiles.
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
USB Cable 0.5m SUM USB A/USB MiniB Type Silver Clad OFC High Purity Copper x Conductors, 6 Aluminum Diecast Connectors, 24 Gold Plated Terminals, Wide Base, Features Soft Sound, Rich Bass, and is Recommended for making classical music resonate loudly. There are scratches on the plug shell (Kojima Yosuke)
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg
Disposal prices have been reduced. Member prices are not applicable. 2023/3/27 Sales price 35,000 yen*Since rust and dullness are conspicuous, it is inexpensive, and is currently sold. Technica's popular tone arm AT-1501/2. Although it has a simple structure, it is a gem where you can feel the commitment to manufacturing at the time. It is an excellent arm that is easy to handle and has good operability. The feeling of use due to aging, such as rust and dullness, is conspicuous (Daiki Goto)
Maintenance information: 2023.3.27 Operation confirmed
Accessories: original box, instruction manual, shell, phono cable
Main specifications: Static balance type, total length 360 mm, effective length 282 mm, needle pressure adjustment range 0 to 3.0 g, arm base hole 23 mm, compatible cartridge weight 3 to 23 g, tracking error 1.5 degrees, arm height 45 to 70 mm
Pair tube 6CA7 compatible ball made in Russia, measurement value 48/46 (rejection value 30) with original box*The pair is determined based on the GM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube KT88 compatible sphere Russian metal brown base measurement value 50/50 (rejection theory 44) there is writing on the base with the blue box ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: blue box
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
The winding of the mainspring is smooth and can produce sound, but the platter swells, and there is no screw in the hinge and the lid comes off, so it is sold as it is. The volume is not big, but I feel good in the cohesion of the sound. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.8 operation confirmed
Accessories: handle
Main specifications: W400 × H335 × D470 11.95kg (actual measurement)