Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 0.6m pair #3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0m pair of XLR cable terminals is an inexpensive yet cost-effective cable made by Neutrik. It's a powerful linear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0 m BNC to RCA specification high quality eco-friendly material sheath is used for the digital cable, and OFC is used as the conductor. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Exclusive resonance with fine-tuned tuning for the 1.0m Z-DTC01W digital RCA cable
Chip Connect is standard equipment. Highly fresh sound can be obtained by virtual direct connection of contacts. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Digital RCA cable 1.0m uses pure silver conductors at a reasonable price. Not to mention the sound quality, the high amount of information and accurate reproduction without coloring is possible (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
PC-Triple C is used as the 1.0 m pair conductor of the RCA cable, and RCA rhodium-plated small terminals are used. It clearly expresses even the smallest details with a clear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
RCA cable 1.0 m pair The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has a high resolution and is an exciting sound that comes out quickly. There is some discoloration on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating applied to both the connector and plug. There is dullness and small scratches (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m BNC specification Belden digital cable and video cable for audio. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
An ultra-compact variable frequency channel divider. This is a product that allows you to easily enjoy multiple amps, and it is a must-see for those who want to try out multiple amps in the future. There are small scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: AC adapter
Main specifications: crossover frequency 1 kHz to 6 kHz continuously variable W109 x H28 x D60 mm approx. 240 g
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product There is dirt on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
The price has been drastically reduced! 2024/3/24 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. On the exterior, there are scratches, corrosion around the unit, and mold floating around the edges. Also, there are some stains and holes in the saran. Serial 23383/23416 (Tamura Eiji)
Maintenance Information: 2024.3.24 Maintained (woofer softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
Air bow stabilizer. Can be used with all AIRBOW belt drive CD transporter players and CEC TL3, TL3N, TL5100, TL51 Series, etc. (Tamura Eiji)
Accessories: original box, manual
A very rare Lux noise cutting transformer. It cuts harmful noise from the power supply and enables high-quality music playback. What is the exterior. There are threads and dullness. Serial 21030124 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: instruction manual
Main specifications: W231 x H137 x H207 mm 6.9 kg
D/A converter equipped with a variety of input terminals in a compact body. It can only be used as a headphone amplifier when using USB. Although it is reasonably priced, it is easy to use and makes you feel that the cost performance is high. The exterior has corner fittings. Serial D53061.6027010 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: Compatible with digital signals USB 48 kHz, optical 96 kHz, and coaxial/balance up to 192 kHz, equipped with Barbrown PCM1796 x 2, W217 x H57 x D257 mm, 1.8 kg
USB cable 0.5 m Dual USB cable with an HR separator that separates and shields the power line from the signal line, and has excellent low jitter and high voltage margins. This cable is excellent for SN and has a great sense of depth of sound (Tamura Eiji)
Accessories: No accessories
※Since it is for business use, it will be handed over as is. 192 kHz/24 bit compatible D/A, A/D converter. Sound output up to 192 kHz has been confirmed with all 8 channels of digital inputs. Other analog inputs confirmed digital conversion to 44.1/48/88.2/96/176.4/192 kHz for all 8 channels. Clock input is also supported. The sound was detailed and plump, and the sound quality was close to Apogee Digital. On the exterior, there are scratches and line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.3.8 operation confirmed
Accessories: power cable
Main specifications: sampling rate 44.1 to 192 khz, W490 x H90 x D 300 mm, weight 5.5 kg
Shelter's current MC cartridge. This item is currently awaiting delivery for at least 3 months. This model combines a hard aluminum cantilever with an oval needle tip and aims for natural sound reproduction with good band balance. The amount of information and the high resolution are fascinating (Tamura Eiji)
Maintenance information: 2024.3.24 Operation confirmed
Accessories: original box, instruction manual
Main specifications: output 0.5 mV impedance 15 ohms needle pressure 1.4 to 2.0 g; needle tip uses an oval solid diamond; own weight: approx. 9.1 g
The price has been reduced. 2024/2/29 sales price 19,800 yen ※Since it is cheap, it will be handed over as is. Medium bookshelf speaker It is a car with a wood grain finish design that seems to match the interior. Recommended for those who want clear and casual fun. There is a thread on the exterior. Serial D457525/D457526 (Tamura Eiji)
Maintenance information: 2024.2.29 sweep check OK
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type playback frequency band 30 Hz to 20 kHz output sound pressure level 92 dB load impedance 8 ohms W279 x H508 x D254 mm weight 11 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/1 sales price 448,000 yen Internal overhauls such as capacitor replacement have been completed! 220V Quad vintage pre-power system with 100-220V step-up transformer The thickness, luster, and tension of the sound are all emotionally composed, and perfectly express the sound of the instrument. Anyway, it has thick, firm mid-bass, and the tasteful sound unique to vacuum tubes is impressive. The exterior has dullness, stains, scratches, etc. Serial 45808/26904/25186 (Tamura Eiji)
Maintenance information: 2023.12.27 Maintained (power transformer rewound repair. Common resistance: 3 W and 1 W deterioration replacements x 2 QUAD22 switch cover added and 2 deteriorated replacements. Replace 3 block capacitors with 22 μF electrolytic capacitors. Replace 2 Mylar capacitors with 5600 pF deterioration. Balance volume exchange. 6 1W resistors and 1/2W deterioration replacements CD input countermeasure → 4 additional 1/2W resistors for Radio1 only. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 220V (measured at rated output 25W SP: 8Ω)
Accessories: copy of instruction manual, power cable, 220V step-up transformer
Main specifications: [QUAD22] EF86 × 2 ECC83 × 2 input PHONO, RADIO, TAPE W267 × H89 × D148 mm 3.2 kg [QUAD2] KT66 × 4 EF86 × 2 GZ32 15W+15W W321 × H162 × D119 mm 8.2 kg/unit
The price has been drastically reduced. 2024/3/21 sales price 228,000 yen This amplifier was planned to commemorate the 35th anniversary of Aura Design. This anniversary model, which bears the VA40 of the first model, is a model that faithfully reproduces the circuit design at that time. The MOSFET single push-pull reproduces fresh sound. This model will be a domestically manufactured model. The exterior is beautiful with no noticeable scratches. Serial ARI0018 (Tamura Eiji)
Maintenance information: 2024.3.21 operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 50W+50W (8Ω) W430 x H76 x D350 mm weight 7.2 kg
Phono cable 0.7 m 5 pin → XLR uses PC-Triplec, a new dream conductor using a forging method developed as the world's first dedicated audio conductor. It doesn't make you feel the distortion, noise, or incidental sound, which are the advantages of single wires (Tamura Eiji)
Maintenance information: 2024.3.24 continuity confirmed
Accessories: none
The price has been reduced! 2024/3/21 sales price 69,800 yen An upgraded version of the MC-0.5 Helix plug-in noise filter. Compared to the previous model, details are sharpened and sharpened, while harshness and roughness are removed. The overall speed is faster, the bass is cleaner, and the sound is clearer and more refined (Tamura Eiji)
Accessories: none
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
The price has been reduced. 2024/3/14 sales price 99,800 yen SENNHEISER's first balanced headphone amplifier. It is equipped with a high-quality D/A converter and a convenient function that can easily adjust input gain, contributing to accurate sound transmission unique to high-end machines. There are no noticeable scratches on the exterior. Serial 1085105159 (Tamura Eiji)
Maintenance information: 2024.3.14 Maintained (4 volume removal, disassembly, cleaning, and reassembly. Voice check for each input and output is OK. (The balanced headphone output is ① L-HOT ② L-COLD ③ R-HOT ④ R-COLD)
Accessories: instruction manual, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz dynamic range 115 dB digital input: 4 systems (USB, coaxial, AES/EBU, S/PDIF optical) analog input: 2 systems (unbalanced) analog output: 1 system (balanced) headphone output: 4 systems (XLR-4:2 systems, 6.3 mm standard: 2 systems) compatible impedance 16 to 600 ohms W224 x H44 x D306 mm body weight approx. 2250 g
A speaker stand with a firm and stable feel. The size is just right for medium speakers such as the NS-1000M. By changing the direction of the middle plate, the width can be changed from about 320 mm to 360 mm. The exterior has dirt and some carpet on it (Tamura Eiji)
Accessories: none
Main specifications: Speaker stand W350 x D300 x H247 mm approx. 6 kg/book
The core model of the high-grade power plug “PC Series”. All PSE standard parts are completely non-magnetic. Due to the characteristics of silver+rhodium plating, it is a product with high resolution, high response, wide range, and you can feel good stretch in the high frequency range. There is a feeling of use and scratches on the blade (Tamura Eiji)
Accessories: No accessories
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Tamura Eiji)
Accessories: No accessories
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
Light and compact, stylish headphones from JVC. The sound has excellent sound insulation and is comfortable to listen to (Tamura Eiji)
Maintenance information: 2024.3.15 sweep check OK
Accessories: case
Main specifications: dynamic type 12 to 24,000 Hz 32 ohms 103 dB 66 g
Dry record cleaner made with premium velvet. The easy-to-hold shape allows you to clean records effectively. There is dullness and a feeling of use (Tamura Eiji)
Accessories: none
A high-precision level gauge that is essential for leveling players. This is a long-selling model with an aluminum body (Tamura Eiji)
Accessories: none
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories