A record cleaner for Nagaoka. The high-density velvet fits the sound groove of the record board and removes dirt. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: body dimensions W115 x D42 x H35 mm 40 g (actual measurement)
BELLDREAM digital needle pressure gauge. This needle pressure gauge has a wide range of measurement locations and is easy to use. There is dullness. (TAMURA Eiji)
Maintenance information: 2026.8.26 operation confirmed
Accessories: case
Main specifications: Measurement range minimum 0.1 g to maximum 350 g
Technica's super long-selling stabilizer. A type with a new design. The record board can be securely fixed to the turntable. Rubber cover construction that is gentle on the board There is dullness and fading (Takasaki Atsushi)
Accessories: none
Main specifications: diameter 80 x 29 mm, weight 600 g
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
The price has been reduced! 2026/8/16 sales price 5,500 yen with original box. Set of 6 spike-shaped insulators made of brass. It makes the high frequencies more beautiful and arranges them to the desired sound (Matsumoto Tsuyoshi)
Accessories: original box instruction manual
Main specifications: load capacity 21 kg (when supported at 3 points), 7 kg (per piece) 28 g
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Accessories: none
Main specifications: dimensions W300 x H45 x D125 mm, weight approx. 540 g
The disposal price has been reduced! (Member price not applicable) 2025/12/9 sales price 3,000 yen set of 8. Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Maintained by the manufacturer. Genuine Stellar Vox PSE compliant America's popular power enhancer. Power supply to audio has been improved with parallel choke coils, and resolution is increased in terms of sound quality. The exterior is dull and has a feeling of use. Serial 10082880 (Takahashi Nobuyuki)
Maintenance information: 2026.8.28 Maintenance completed (power lamp unit replaced*The power lamp unit has been replaced with a new model and changed to blue. (Check operation)
Accessories: original box power cable
Main specifications: 4 outlet inlet 15A type, input voltage 100 to 120 V, noise removal rate 45 dB or more, maximum capacity 15 A, W215 x D152 x H230 mm, 15 kg
PSE certified product. Noise and lightning protection noise protector. By using a composite common mode choke developed by NTT, it exhibits high attenuation capability against wideband noise. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2026.8.22 operation confirmed
Accessories: none
Main specifications: rated voltage AC125V rated current 5A external dimensions (maximum dimensions) H35 x W165 x D52 mm outlet 3P x 1 cable 0.4 m plug 3P approx. 400 g
Unspecified rack side plate pair. After checking the images, if you were looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W45 x H430 x D555 mm 7.5 kg (actual measurement)
This is a solid turntable mat made of special metal. Resonance in the low frequencies is stopped, and deep low frequency reproduction such as sinking is possible. It can also be expected to be useful as a countermeasure against howling. Serial AP11505 (Murakoshi Yoichi)
Accessories: none
Main specifications: Diameter measured approx. 300 mm, dead weight approx. 870 g
※Inexpensive because it is a cleaner only. This is a wet cleaner for records only. A wide type that can wipe down the surface of an LP record. There is a feeling of use (Tomoho Asaine)
Accessories: none
Enacom series cable terminator. ※The tip is an alligator clip. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2026.8.25 Operation confirmed
Accessories: No accessories
Main specifications: body length 52 mm, diameter 20 mm
The price has been reduced! 2026/1/8 sales price 1,000 yen*Cleaning liquid and tray are not included. Record cleaner with a wet and dry 2-split structure. Oriented velvet is used, and the cleaning effect is excellent. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W118 x H43 x D57 mm
Macintosh wood cabinet with pan lock I wasn't able to determine which model it was for. Please check the measurements. The exterior has a feeling of use over time, such as spots, scratches, dents, etc. (Matsumoto Tsuyoshi)
Accessories: none
Main specifications: W446 x H195 x D367 mm inner diameter W373 x H127 mm 5.4 kg (actual measurement)
Genuine micro arm base It is for the SX-8,000/5000/3000/1500 series and is for the SME long arm 3012 and 3012R. A feeling of use can be seen on the exterior, dullness, stains, corrosion, discoloration, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main Specifications: Micro: Compatible with SX-8000, 5000, 3000, 1500 series, 997g (actual measurement)
Compatible with micro SME short tonearm bases 3009 and 3010. There are scratches and dullness on the exterior. (TAMURA Eiji)
Accessories: none
Main specifications: Compatible players: BL-101, BL-91, BL-111, etc.
A compact and easy-to-use Orthophone digital needle pressure gauge. It is easy to operate, and it is possible to easily adjust needle pressure with high accuracy. There is dullness and slight stickiness on the bottom. (TAMURA Eiji)
Maintenance information: 2026.8.26 operation confirmed
Accessories: case
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g
The price has been drastically reduced! 2026/8/24 sales price 50,000 yen. This is a line transformer using the famous HS-56 manufactured by TRIAD. Both PRI/SEC have 600 ohm specifications, and can be used for impedance matching and isolation applications between lines. The exterior has dullness, scratches, and correction marks (Tomoho Asaine)
Maintenance information: 2026.8.24 sound released and confirmed
Accessories: none
Main specifications: size W180 x H120 x D130, weight approx. 900 g (actual measurement)
Set of 4 pairs of pin plate insulators. Since it is made of 2 different materials, you can enjoy the difference in sound quality by replacing the top and bottom. There are scratches and paint peeling on the exterior (Matsumoto Tsuyoshi)
Accessories: none
Main specifications: advanced high carbon cast iron diameter 50mm x height 12mm dead weight 155 g
The price has been reduced. 2026/7/19 sales price 10,000 yen Hayami Kosan speaker stand. The inside of the pillar can be filled with anti-vibration material, such as sand for tuning, according to preference. The design that matches the Jolt series is also stylish. There are some scratches on the exterior. (TAMURA Eiji)
Accessories: No accessories
Main specifications: total load capacity 50 kg/unit W280 x H418 x D340 mm, mass approx. 5 kg/unit
No emblem used, good condition! High-carbon cast iron stand with excellent vibration handling capacity, set of 4 low type 140 mm high. It can be used for a wide range of speakers from large to medium. It accurately and tightly reproduces sound images (Murakoshi Yoichi)
Accessories: instruction manual, emblem
Main specifications: W100×H140×D300mm Weight 8kg
Self-made heavy metal turntable seat with unspecified details. If you've been looking for one, take this opportunity. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: material unknown, diameter: 293 mm, thickness: 4.9 kg (actual measurement)
Comes with original box! A compact and easy-to-use Orthophone digital needle pressure gauge. It is easy to operate, and it is possible to easily adjust needle pressure with high accuracy. There is dullness. (TAMURA Eiji)
Maintenance information: 2026.8.22 operation confirmed
Accessories: original box, case
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g
A bread stand for the 101 series. Please use it by inserting it into a shelf board or the like and securing it. The exterior has scratches, paint bald spots, etc. (TAMURA Eiji)
Accessories: none
Main specifications: [Compatible models] 101 series, 111 ADW, 111 PYB/PYW, 120/120S, 121/121V, 125, 201AVM, 201MM, 214, AM-5III, AM-6, AM-10II/IIW, AM-15/15W, LS-8/LS-8II, LS-12II swing angle: horizontal 360°, vertical +-90° weight 590 g