Maintained! Hi-Fi is in stock for the first time! Macintosh transistor AM/FM tuner. The reception sensitivity is also good, and you can enjoy deep and warm sound even though it is a transistor. The exterior is scratched and dull. Serial JCR1658 (Jun Tamai)
Maintenance information: 2024.5.31 maintained (varicon cleaning, F cover adjustment, OSC capacity adjustment, windshield peeling correction, each SW and VOL cleaning)
Accessories: none
Main specifications: W405 x H135 x D360 mm weight 8.1 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
The price has been drastically reduced. 2024/5/17 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. In addition to large dents on one side, there is a light feeling of use and dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
The price has been reduced. 2024/5/30 sales price 128,000 yen*It is cheap because it is in poor condition such as being scratched or the saran net peeling. It is tightly packed with a strong sealed enclosure and a high-quality unit, and the sound is moist and calm. If you drive with an amplifier with a strong drive, you can enjoy the dense mid and low frequencies. The exterior has scratches, scratches, and creases. Serial 02093/02092 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: impedance 8Ω output sound pressure level 85dB W220 × H390 × D255 mm 15 kg
The price has been reduced. 2024/5/30 sales price 128,000 yen Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm) 1 pre-out system W385 x H134 x D230 mm 7 kg
Maintained! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to a thick, analog-like sound quality that comes out well. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 21120262 (Jun Tamai)
Maintenance information: 2024.5.19 Maintained (motor bearing oil replacement deteriorated parts (electrolytic capacitor semi-fixed resistance rectifier diode) replacement tone arm disassembly/shaft bearing replacement lifter disassembly/grease up speed switching SW rotation fine adjustment volume disassembly/contact polish since the insulator has deteriorated, replaced with a replacement product turntable rotation speed confirmation arm operation needle pressure confirmation exterior cleaning sound output test (Other operation confirmation dust cover newly created)
Accessories: instruction manual overhang gauge
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. You can see the exterior, discoloration of the letters, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 maintenance completed (poor contact with connectors such as internal PHONO board/LINE board, etc. → pin caulking, contact polishing, other internal board coupling C replacement, operation check)
Accessories: copy of instruction manual, power cord, connection cord
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
The price has been reduced. 2024/5/29 sales price 108,000 yen This is an MC-only phono equalizer that was sold to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is an appearance, dullness, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
2022.9.10 This is the first 607 model that has undergone full maintenance, such as replacing capacitors, transistors, and SP terminals! It's one that makes you feel the intricacies unique to the heyday of audio. You can feel the strength of extrusion in the low range when playing LP records and the dynamic sense of dynamism with an intonation in the middle range, which is unique to the golden age of SANSUI. The exterior has dullness and small scratches. Serial 227050109 (Yonejima Satoshi)
Maintenance information: 2022.9.10 Maintained (electrolytic/tantalum capacitors, transistors, SP terminal replacement, RCA terminal polishing. Board cleaning and re-soldering. SW/VR disassembly and cleaning, application of grease to prevent oxidation and sulfation, replacement of tantalum capacitors, electrolytic capacitors, transistors, and heat dissipation sheets in the EQ/TONE section. Semi-fixed resistor, cement resistor, fuse resistor, fuse, relay replacement. Input waveform confirmation, load test (1kHz sine wave, 8Ω load: 65W+65W OK) sound output test)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Maintained! A player equipped with the Wolfoson WM8740 DAC chip with 192 kHz/24 bit resolution, and has strong expressive power and tends to sound straight. The exterior has a feeling of use such as dullness. Serial 704-3341068 (Tomonori Asaine)
Maintenance information: 2024.6.1 maintained (loader mechanism Assy replacement implemented EJECT key contact replacement foot rubber repair main software update (V104->V111), etc. confirmed)
Accessories: remote control power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/24 sales price 128,000 yen A digital amplifier equipped with a Tripath class T PWM amplifier IC. It beautifully expresses the sense of energy and description. Gain can also be switched on the back, and it is compatible with a wide range of input sources. On the exterior, there are oxidation and scratches on the manufacturer logo. Serial 100210015 (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: instruction manual, power cable, spike
Main specifications: output 150W+150W (8Ω) 240W+240W (4Ω) W420 x H98 x D395 mm weight 13 kg
The disposal price has been reduced! Member prices are not applicable. 2024/5/17 sales price 99,800 yen ※The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
The price has been reduced! 2024/5/25 sales price 89,800 yen Maintained! CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. The exterior is dull all over, and paint peeling can be seen on the body. Serial 137743 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (damper replaced)
Accessories: No accessories
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
Sold 1 bottle, 300B equivalent tube, direct heat triode tube, English tea base, double ring getter, measured value 66 (rejected value 58) with original box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/5/28 sales price 79,800 yen Maintained by the manufacturer in 2024/4! DENON's pre-main amplifier. It is a mid-size model, and a staple machine with excellent stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 8061507480 (Jun Tamai)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Maintained! This is a JBL mid to high range driver. It is also used in the S2600 and S3500, etc., and the well-balanced sound quality with both strength and subtlety is truly a JBL. It can be used on various systems with easy-to-use specs. The exterior has peeling paint, dullness, etc. Serial 041250 041277 (Yonejima Satoshi)
Maintenance information: 2024.6.1 maintained (diaphragm installation adjustment, pad dampener and screw connections OK. DCR (041250/3,4ohm diaphragm no scratch) DCR (041277/3,0ohm diaphragm no scratch))
Accessories: No accessories
Main Specifications: High Range Driver Throttle Diameter 25mm Impedance 8Ω Frequency Range 500Hz to 20kHz Pure Titanium Crossover Frequency 800Hz W147 x H147 x D105 mm 4.3 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual cartridge, EP adapter, subweight
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maintained! A model based on the CDP-502ES with digital outputs and insulators added. It plays a delicate and detailed sound while maintaining the firm low frequencies and good vocal localization typical of Sony. You can see a feeling of use on the exterior, air cap marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 maintenance completed (grease re-coating of each part of the CD mechanism, mechanical drive belt replacement, tact switch replacement, optical system cleaning)
Accessories: none
Main specifications: Unilinear multi-bit D/A converter linear pick mechanism coaxial digital out copper-plated chassis multi-bit machine W430 × H80 × D365 mm 9.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/5/9 sales price 69,800 yen Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg