Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
1
Manufacture:JBL
Price: JPY 134,545(pair)
- description
- This is a 1,100 Hz, 9,000 Hz crossover network connecting units other than woofers with an external connection for the ultra-rare JBL 4350. The attenuator is for tweeters. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.9.15 operation confirmation (attenuator installed, crossover confirmed) Accessories: circuit diagram (copy) Key Specifications: Crossover frequency 1,100 Hz, 9,000 Hz
- description
- Maintained. Scarce! Altec 604-8G coaxial 2-way network. The crossover is 1,500 Hz. If you've been looking for one, take this opportunity. There is a dull feeling of use (Sasaki Shota) Maintenance information: 2024.9.14 maintained (attenuator VR disassembly contact cleaning, crossover check OK) Accessories: none Main specifications: 2-way network crossover frequency 1,500 Hz
- description
- Maintained. This is a 2-way network. The bass is also extruded well, and the high frequency adjustment range can be taken widely with 2 types of HF/MF attenuators, so it is a model that is easy to match the desired sound quality. There is a crack repair mark on the corner (Oikawa Tetsuji) Maintenance information: 2024.9.10 maintained (attenuator VR disassembly contact cleaning, crossover check OK) Accessories: none Main specifications: W114 × H190 × D228 mm 1.8 kg, crossover frequency 1.2 kHz, impedance 8 Ω, level control is continuously variable in the middle range up to -8 dB at 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
- description
- Maintained. This is Altech's 2-way, 800Hz crossover network. Equipped with an attenuator. Please use this when you want to change A5 or A7 to 800Hz. The exterior has small scratches, dullness, etc. and a feeling of use (Satoshi Yonejima) Maintenance information: 2024.9.10 Maintained (attenuator VR disassembly contact cleaning. (Crossover check OK) Accessories: No accessories Main specifications: allowable input 100W input impedance 8Ω attenuator 1dB to 10dB crossover frequency 800Hz dimensions W122 x H140 x D143 mm weight 1.6 kg
- description
- Maintained. This is Altech's 2-way, 800Hz crossover network. Equipped with an attenuator. Please use this when you want to change A5 or A7 to 800Hz. Dullness over time and small scars (Oikawa Tetsuji) Maintenance Information: 2024.9.10 Maintained Accessories: none Main specifications: allowable input 100W input impedance 8Ω attenuator 1dB to 10dB crossover frequency 800Hz dimensions W122 x H140 x D143 mm weight 1.6 kg
- description
- Maintained! This network is used for A5, A7, etc. Unlike channel dividers, it is easy to handle, and the sound is familiar to the ear. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.29 Maintained (frequency characteristic check, ATT cleaning, terminal/screw cleaning, butyl tape removal work) Accessories: none Main specifications: crossover 500 Hz 8 ohms W123 x H140 x D132 mm 1.6 kg
- description
- Maintained! This network is used for A5, A7, etc. Unlike channel dividers, it is easy to handle, and the sound is familiar to the ear. There are dirt marks and scratches on the exterior. Serial 7262, 9085 (Fujisawa Yukishi) Maintenance information: Maintained on 2024.8.30 (The A.B unit attenuator has been disassembled and cleaned.) 2020.9.20 Maintained (Input terminals replaced with banana-compatible general-purpose products. Remove output terminal solder. Capacitor fixing and wiring insulation. ATT disassembly contact cleaning, contact grease application. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check) Accessories: No accessories Main specifications: crossover 500 Hz 8 ohms W123 x H140 x D132 mm 1.6 kg
- description
- The price has been drastically reduced! 2024/8/30 sales price 118,000 yen Maintained! Rare 16 ohm specification. A 1.2 kHz crossover network used in JBL Metrogons and early Harkness. The company used it when combining a 130A woofer and a 175DLH. *The HF GAIN switches are slightly different on the left and right. There is rust and dirt on the exterior. Serial 501170/ unknown (Tamura Eiji) Maintenance Information: 2024.8.30 Maintained (attenuator SW contact cleaning. *Please note that the HF gain switches are different on the left and right. Crossover check OK. (Replaced due to enamel resistance burn.) Accessories: none Key Specifications: Crossover 1.2kHz 16Ω W159 × H153 × D127 mm 2.2 kg
- description
- ※1 bottle only. Currently sold. ALTEC's crossover variable frequency network. The graininess and sound cuts are also impressive. With this network, you can easily switch horns and drivers in various ways. There are stains and scratches on the exterior due to aging. Serial 313877 (Yonejima Satoshi) Maintenance information: 2024.8.26 operation confirmed Accessories: No accessories Main specifications: Crossover 500 Hz, 800 Hz, 1200 Hz switched with a jumper, banana plug input compatible W191 x H110 x D350 1.8 kg/bottle
- description
- Maintained! 2-way dividing network. There are many users on the 8000 Hz JBL standard crossover network, so you can use this model with peace of mind. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo) Maintenance information: 22024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: 2-way crossover, 8 kHz impedance, 12 to 16 ohms, allowable input, 50 W, continuously variable attenuator
- description
- Maintained! 2-way dividing network. There are many users on the 8000 Hz JBL standard crossover network, so you can use this model with peace of mind. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: 2-way crossover, 8 kHz impedance, 12 to 16 ohms, allowable input, 50 W, continuously variable attenuator
- description
- Maintained! 2-way dividing network. There are many users on the 8000 Hz JBL standard crossover network, so you can use this model with peace of mind. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: 2 way crossover 8 kHz impedance 12 to 16 ohms allowable input 50 W attenuator continuously variable
- description
- Maintained! 2-way dividing network. There are many users on the 8000 Hz JBL standard crossover network, so you can use this model with peace of mind. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: 2-way crossover, 8 kHz impedance, 12 to 16 ohms, allowable input, 50 W, continuously variable attenuator
- description
- Maintained! With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Ryo Mizusaki) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. There is a slight feeling of use on the exterior, such as dullness and scratches (Mizusaki Ryo) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Ryo Mizusaki) Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK) Accessories: none Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained in 2015. A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1569/14189 (Murakoshi Yoichi) Maintenance information: 2015.10.29 maintenance (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT exchange. Fixed a wiring mistake. Capacitor replacement. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz) Accessories: none Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 9771 9927 (Tomonori Asae) Maintenance information: 2024.7.30 maintained (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check) Accessories: none Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
- description
- Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 15050 15221 (Tomonori Asaine) Maintenance information: 2024.7.30 maintained (input terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning terminal replacement attenuator SW contact cleaning crossover check) Accessories: none Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
- description
- Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. Serial 33331 33351 (Tomonori Asaine) Maintenance information: 2024.7.30 maintenance (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check) Accessories: none Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
- description
- Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 15059 15192 (Tomonori Asaine) Maintenance information: 2024.7.30 maintained (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check) Accessories: none Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
- description
- Maintained! JBL's 8Ω high range network. Can also be used in combination with JBL LE175, LE85/075, and 077, or when combining a full range speaker with a tweeter (Ryo Mizusaki) Maintenance information: 2024.7.17 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, red terminal defect replacement, attenuator VR dead replacement, crossover check OK) Key Specifications: 2-way crossover, 8,000 Hz, impedance, 8 ohms, continuously variable level control, no weight 0.9 kg
- description
- Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage, dullness, and paint chips (Mizusaki Ryo) Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, resistance (80 ohm) defect replacement, attenuator SW contact cleaning, crossover check OK) Accessories: none Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
- description
- Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior such as line damage and rust (Ryo Mizusaki) Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK) Accessories: none Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
- description
- Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo) Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK) Accessories: none Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
- description
- Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior has a broken frame on one side, and there is a feeling of use such as line damage and dullness (Mizusaki Ryo) Maintenance information: 2024.7.7 maintained (terminal terminal mounting screw rust and insulation bushing deterioration replacement, terminal cleaning 155686 GAIN CON SW defect replacement, attenuator SW contact cleaning, crossover check OK) Accessories: none Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
- description
- Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units. The exterior has small scratches, threads, dirt, etc. (Mizusaki Ryo) Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, terminal damage replacement. (Attenuator SW contact cleaning, crossover check OK) Accessories: none Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
- description
- Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? The exterior has a feeling of use such as dullness and small scratches (Ryo Mizusaki) Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK) Accessories: none Main specifications: loss over frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
- description
- Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? There is a feeling of use on the exterior, such as dullness and small scratches (Mizusaki Ryo) Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK) Accessories: none Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
- description
- Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- 8000 Hz network for high range It can also be used in combination with JBL 077 or when combining a full range with a tweeter. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.25 maintained (terminal terminal deterioration replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 8000 Hz check OK) Accessories: none Key Specifications: 2 Way Variable Level Control Crossover Frequency 8kHz 8Ω Weight 0.9 kg
- description
- Maintained! JBL's 2-way network. An essential item when adding a tweeter driver to a full range unit such as the D130. The exterior has paint peeling and dullness. Serial 39585 38470 (Tomonori Asaine) Maintenance Information: 2024.5.16 Maintained (12 Terminal Mounting Screws, 24 Insulating Bushings, Terminal Cleaning, Attenuator, VR Replacement, Crossover Check) Accessories: none Main specifications: 2-way network 8 ohm crossover 2,500 Hz W121 × H153 × D93 mm 0.7 kg
- description
- Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso) Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement) Accessories: none Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
- description
- Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso) Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check) Accessories: none Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law) Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning) Accessories: none Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
- description
- The disposal price has been reduced. Member prices are not applicable. 2023/9/22 sales price 69,800 yen ※Since it is a modified product, it will be sold as is. 3-way network. Detailed crossovers are unknown. The attenuator is equipped with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight gap, but the sound has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota) Maintenance information: 2023.9.22 sound output confirmed Accessories: none Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
- description
- Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi) Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.) Accessories: no accessories Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso) Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check) Accessories: none Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained on 2015.6.11. The graininess of the sound has been clarified, and the smoothness of the connection has also been improved. It is a crossover 1200 Hz network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has paint peeling and stains. Serial 9858/9958 (Miura Kimiya) Maintenance Information: 2015.6.11 Maintained (terminal polishing, cleaning, insulation bush mounting screw replacement. ATT cleaning. Input/output waveform and balance check, sound output check. (Frequency characteristic measurement check) Accessories: no accessories Key Specifications: Crossover 1200Hz 8Ω 3-Position Switch with Level Control
- description
- The price has dropped drastically. 2018/8/31 sales price 79,800 yen The capacitor has been replaced with a JENTZEN film capacitor! The network used in the L200B. Perfect for 2-way use assuming a JBL 15 inch woofer. It is a rare network with a thick and powerful sound. There are stains and small scratches on the exterior (Wang Zhan) Maintenance information: Maintained on 2015.7.7 (terminals replaced with banana plug compatible products. The connection part of the input wiring was changed to a gobble. ATT exchange. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check) 2011.7.21 Maintained (capacitor - replacement, silicon bond application, ATT contact check, rivet repair, characteristic check, sound and waveform check, interior cleaning, etc.) Accessories: none Main specifications: 8Ω 800Hz 150W mounting opening W91xH98mm screw pitch left and right 111 mm top and bottom 143 mm
- description
- Refresh yourself by replacing the insulated push with a new one! The terminals have also been polished, so you can use it comfortably. A dividing network with a crossover frequency of 1200 Hz. If you cut it a little lower, I think the impression will change quite a bit once you try using it. How about going with making a system? The exterior is smudgy and has a feeling of use. (OYAMA Sachiko) Maintenance Information: 2015.10.19 Maintained (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT (SW) cleaning. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz) Accessories: none Main specifications: crossover frequency 1.2 kHz impedance low range: 8 to 12 ohms high range: 12 to 16 ohms 1.1 kg
1
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
