Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
*Currently sold. IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. The exterior is dull, there is a feeling of use, and there are places where the letters on the back have disappeared (Sasaki Shota)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: copy of manual, power cable
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
The price has been reduced! 2024/6/13 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. There is a small scratch on the front (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: original box, copy of manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g