The price has been reduced! 2024/3/22 sales price 200 yen ※PSE standard product! This is a standard type of wall outlet. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 continuity confirmed
Accessories: none
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Krypton high carbon steel insulator set of 4 It is a product that greatly improves acoustical and physical properties such as sound propagation speed with a special hard coating. The bottom surface uses silicone rubber material that dampens the natural vibrations of the metal and has an anti-slip effect with the floor, and has an adhesive effect on the floor. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: flat type, diameter 40 x height 10 mm, 95 g per piece
The price has been reduced. 2023/6/27 sales price 15,000 yen Qables Potaan is 192 kHz compatible. It supports up to 192 kHz/24 bit via the SPDIF digital input terminal and 48 kHz/16 bit via USB. For those looking for high quality sound anywhere easily (Oikawa Tetsuji)
Maintenance Information: 2023.6.27 Operation confirmed
Accessories: connection cord, case
Main specifications: W70 x H23 x D126 mm 200 g
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
Otai audio brand high-capacity clean power supply. CSE special order The sense of localization becomes so clear that it makes you think that the sound changes just by inserting the power supply, and a sound field rich in spatial expression comes out. Another advantage is that the grunt is very small. There are small wounds and dents (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: power cable
Main specifications: clean power supply capacity 3000 VA 100/200 V with input changeover switch (inlet is 3 pins) output voltage 100V output 3 pins x 6 ports W300 x H194 x D357 mm 32 kg
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It's a volatile and safe cleaner. About 80% of the remaining amount is left (Yamato Yuki)
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
※Since there are spike marks, it is inexpensive. This is a custom-sized grandezza, a luxurious audio-only board using Apiton plywood, which is the king of acoustic wood. It's just the right size for a small speaker or Tall Bowie type. The exterior has scratches, scratches, etc. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W310 x H60 x D350 mm
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Oikawa Tetsuji)
Accessories: case
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
This is a rare insulator made by Sony. It is a well-made insulator using air, rubber, and oil. There is a feeling of use, such as marks of the device being placed on it. (FUJISAWA KOSHI)
Accessories: none
Main specifications: maximum load 30kg/weight 89g/piece per 4 pieces
Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi)
Accessories: case bottom
Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)
Set of 4 Kyocera ceramic insulators The top is made of metal and the bottom is made of cork material. It is clear and you can expect the unique sound of ceramics. There are scratches and stains on the exterior due to use over time. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 30mm height approx. 15mm weight approx. 25g/piece
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 18,000 yen USB isolator Input to USB Type-B and output from USB Type-A. USB low-speed (1.5Mbps) and full-speed (12Mbps) dedicated hubs. Please refer to the manufacturer's website for details. https://octy.co.jp/products/usb20.html ※5V power supply is not included. Please prepare separately (Oikawa Tetsuji)
Maintenance information: 2023.12.10 storefront operation confirmed (5V test power supply is supplied, and sound output operation confirmed by connecting between PC and USB DAC)
Accessories: *USB microB 5V power supply is not included. Please use your own USB adapter or the like.
Main specifications: 110mm×64mm×30mm 230g
Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
Exclusive stand for the DS-77HR sold separately. Of course, it is also recommended for other medium speakers. The exterior has creases, floats, scratches, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W410 x H264 x D330 mm weight 10 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Main specifications: W600 x H1200 x D230 mm 16.5 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: W600 x H1200 x D230 mm 16.5 kg
The current state is just the main unit and the dust removal brush. Discwasher record care system. The cleaning liquid is out of stock, so it's cheap. The touch and grip when you hold it is reminiscent of a brush from a luxury shoe cleaning kit. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box, brush
Main specifications: W121 x H60 x D58 mm (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2023/7/10 sales price 1,000 yen, ceiling/wall bracket only 1 can be used when constructing a home theater system
(ASAINE Tomonori)
Accessories: original box
Main specifications: weight 140 g without rod attached 175 g when rod attached
This is a model with PAD cryo treatment applied to the TOSHIBA 3P/2P conversion adapter. There are some cracks, but they are glued together (Oikawa Tetsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Speaker stand for the company's S-55twin. It is a size that is useful for other small and medium speakers. In addition to the exterior and veneer peeling on the side of the bottom, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W310 x H498 x D350 mm weight 5.8 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
This is a special cleaner for 12-inch LP records that can clean records with 200W high-output ultrasonic waves. It can remove micro, stubborn dirt and dust that is invisible to the naked eye and adheres deeply to the sound groove. This effect also has an overwhelming impact on sound quality. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Jogo power cable (general purpose)
Main specifications: built-in tank capacity 2.5 liters (use of commercially available purified water is recommended). Approximately 50 to 100 sheets can be washed with one water supply W435 ✕ H300 x D181 mm weight 14.4 kg
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Disposal prices have been reduced. Member discounts are not applicable. 2022/7/10 sales price 4,000 yen. BOSE 301MM Ceiling Mount Bracket I checked the installation, but the specifications seem to be slightly different from the original (Murakoshi Yoichi)
Accessories: mounting screws
Main specifications: Mounting bracket, inner size, 234 x 150 mm, mounting screw position (diagonal), 80 x 80 mm, external dimensions 243 x 350 x 150 mm, 1.35 mm
Disposal prices have been reduced. The 2020/2/10 sales price is 3,000 yen. ※It is inexpensive because it is in poor condition. Ceiling hanging bracket for the company's speaker 301 MM/2. It can be adjusted up and down by ± 90 degrees, and can be rotated 360 degrees horizontally. The feeling of use, rust, dullness over time, and stains are severe, and there are places with rust. (WATANABE Tadashi)
Accessories: none
Main specifications: W248 x D150 x H195 mm 1.4 kg/piece