Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※It is inexpensive because there are many scratches. TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
The price has been reduced. 2017/10/6 sales price 3,000 yen This is a speaker mounting bracket when using the speaker system PS-S200 series etc. as a ceiling suspension. There are spots, rust, and small scratches on the exterior. One single-sided pin is missing (Wang Exhibition)
Accessories: none
Main specifications: compatible models PS-S224W/WH, PS-S226W, PS-S203W, PS-S204W, PS-S207W,
PS-S550W, PS-S552W, PS-S553, etc. Load capacity 12 kg, angle adjustable 1.13 kg
Victor's AV selector 4 inputs 1 output The exterior has a feeling of use such as dirt, scratches, and smudges (Kanai Hidetsugu)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: none
Main specifications: W169 x H40 x D78 mm 200 g (actual measurement)
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Accessories: none
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
※There are no accessories, and the black polarized rubber is missing, so it's cheap. WBT representative spade plug set of 4 High pressure fit with sandwich spade construction It has high rigidity, suppresses the generation of noise and strain in contact areas, and has a structure that can withstand large amounts of current. The plug is dull (Kojima Yosuke)
Accessories: none
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
It is expressed in detail without leaving any sound field expression or afterglow of the sound, and has a well-balanced and natural impression compared to a short bar (Oikawa Tetsuji)
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images.
Unspecified wood cabinet. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W470 x H134 x D310 mm 2.2 kg (actual measurement)
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been reduced. 2023/11/15 Sales price 8,000 yen Center speaker stand from unknown manufacturer. It is a type that is easy to handle with wooden casters. There are threads on the exterior. (Miura Kimiya)
Accessories: No accessories
Key Specifications: W570 ✕ H225 ✕ D440mm 4kg
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm