Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
A stabilizer that appears to be made of brass. Details are unknown, but it is a sturdy construction with a profound feeling. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: diameter approx. 79 mm, height approx. 24 mm, weight: 934 g (all actual measurements)
Comes with original box and hex wrench Banana Plugs, Set of 4, Phosphor Bronze, Silver+Rhodium Plated Banana Plugs with a beautiful direct plating design. You can also increase the resolution with your own system
Accessories: original box, hex wrench
It is expressed in detail without leaving any sound field expression or afterglow of the sound, and has a well-balanced and natural impression compared to a short bar (Oikawa Tetsuji)
Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images.
Stand is missing. It is an item that can be placed on the left, right, or center of the speaker to reduce low frequency fogging and sound reflection and improve sound quality. The knit attached to the frame can be used in both dark gray and charcoal gray (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H1300 x D37 mm 4.6 kg
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The current state is just the main unit and the dust removal brush. Discwasher record care system. The cleaning liquid is out of stock, so it's cheap. The touch and grip when you hold it is reminiscent of a brush from a luxury shoe cleaning kit. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box, brush
Main specifications: W121 x H60 x D58 mm (actual measurement)
Set of 8 brass insulators The compact size is ideal for small speakers and CD players. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure; load capacity: 5 kg per piece; diameter: 18 x thickness: 11 mm; weight: approx. 18 g per piece
The price has been reduced! 2024/6/2 sales price 79,800 yen Special arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
※There are no accessories, and the black polarized rubber is missing, so it's cheap. WBT representative spade plug set of 4 High pressure fit with sandwich spade construction It has high rigidity, suppresses the generation of noise and strain in contact areas, and has a structure that can withstand large amounts of current. The plug is dull (Kojima Yosuke)
Accessories: none
Set of 4 Audio-Technica banana plug Insert the core wire of the cable that has been coated by about 5 mm beforehand, fold the tip back, tighten it back, and fix the cable firmly before use (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Line noise filters. An accessory that thoroughly eliminates transient distortion generated within line cables and improves overall signal-to-noise ratio. Sounds that could not be heard until now appear clearly, and it becomes a dynamic playback sound that stretches and stretches from low to high frequencies (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: none
Main specifications: Input side: RCA jack Output side: RCA pin plug
Enacom series cable terminator. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. (FUJISAWA KOSHI)
Accessories: No accessories
line harmonizer. Sound quality improvement item by using 10 ferrite cores in series. It has the effect of reducing noise and improving sound quality (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: case, instruction manual
1 pair of unspecified speaker terminals. The construction is solid. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
Remote control for Ayre K-1 Operation was checked at the company's K-1 x. If you are looking for one, why not (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Garrard 301 turntable seat. This mat alone changes the sound quality. Try it once! In addition to cracks on the exterior and spindle holes, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
※It is inexpensive because there are many scratches. TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
Oyaide record stabilizer. The vibration mode is optimized with a hybrid configuration of aluminum, brass, and texalum. Unnecessary vibrations associated with platter rotation are attenuated, and sound groove tracing is dramatically improved. It can also be used as an EP stabilizer by reversing it up and down (Daiki Goto)
Accessories: original box, instruction manual
Main specifications: 200g (no weight) to 440g (full weight attached) *Weight can be changed in 40g increments, diameter 70mm, H35mm
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior and scratches on the back (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. The exterior has been changed to dullness and rubber feet. Serial 20220398 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. There is a slight linear stain on the surface (Murakoshi Yoichi)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
Currently sold. ADC 10-band graphic equalizer. There are no problems with the current situation, operation, etc., but the current situation is because it is cheap. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: none
Main specifications: W435 x H88 x D222 mm 4.3 kg
Set of 24 Amazon Basic banana plug It can be connected, making it convenient when adding tweeters, etc. If you've been looking for one, go ahead. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
※The top surface is severely damaged, so it is inexpensive. This is a custom-made model that fits the size of Acoustic Revive's popular RSS series 4-legged speaker stand to LAT-2. Of course you can use it with other speakers if the size fits (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W300 x H610 x D400 mm top plate W280 x D360 mm 28.5 kg/1 bottle (actual measurement)
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle
A slow starter that slowly starts the connected device and protects it from inrush current when the power is turned on. PSE standard product The front panel indicator gradually brightens in sync with the gentle power start, and you can visually confirm the soft start. Serial 0919HA7026120709 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 continuity confirmed
Accessories: No accessories
Main specifications: Output/input capacity 1500 VA, output frequency 50/60 Hz, standby power 0.01W or less, W130 x H94 x D267 mm (without protrusions) 1.8 kg
Unspecified wood cabinet. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W470 x H134 x D310 mm 2.2 kg (actual measurement)
This is a special cleaner for 12-inch LP records that can clean records with 200W high-output ultrasonic waves. It can remove micro, stubborn dirt and dust that is invisible to the naked eye and adheres deeply to the sound groove. This effect also has an overwhelming impact on sound quality. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Jogo power cable (general purpose)
Main specifications: built-in tank capacity 2.5 liters (use of commercially available purified water is recommended). Approximately 50 to 100 sheets can be washed with one water supply W435 ✕ H300 x D181 mm weight 14.4 kg
The price has been reduced! 2024/4/21 sales price 4,500 yen This is a genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box