Everything from exterior painting to driver gap cleaning has been refreshed and maintained with attention to detail! 4343 original unit, 4343GY by All Alnico! A famous machine that clearly expresses a rich low-frequency sound and a sense of depth, and continues to be popular even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-microphone regardless of age or genre. Serial 14004/14414 (Takasaki Atsushi)
Maintenance information: 2023.4.17 Maintained (exterior repair/gray paint,
Front and rear baffle repair/coating, saran net replacement, frame repair, woofer maintenance (edge replacement, cone paper coating), mid maintenance (edge replacement, cone paper coating), driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning), tweeter maintenance (horn disassembly cleaning, magnetic circuit rust removal/gap cleaning, terminal contact cleaning), Network maintenance (damaged terminal (x1) replaced from stock parts. Terminal rust removal, pickling, insulation bush & mounting screw replacement. There is evidence that the ATT was replaced by the user, but the round ATT was replaced with a new one with a square ATT with high power, the large ATT was disassembled and cleaned, contact grease was applied, and the wiring was re-soldered. INT/EXT switch-over SW contact cleaning A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output), detach the unit)
Accessories: saran net, diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki)
Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable)
Accessories: none
Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
*Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained on 2015.6.11. The graininess of the sound has been clarified, and the smoothness of the connection has also been improved. It is a crossover 1200 Hz network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has paint peeling and stains. Serial 9858/9958 (Miura Kimiya)
Maintenance Information: 2015.6.11 Maintained (terminal polishing, cleaning, insulation bush mounting screw replacement. ATT cleaning. Input/output waveform and balance check, sound output check. (Frequency characteristic measurement check)
Accessories: no accessories
Key Specifications: Crossover 1200Hz 8Ω 3-Position Switch with Level Control
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
Maintained! A network using excellent parts such as high-voltage nonpolar capacitors and coils using low-loss Orient Cores. The cross is easy to use at 500 Hz, and it is a very easy to use network for those who are assembled with drivers such as 375 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (12 terminal terminal mounting screws, 24 insulation bushings, terminal part cleaning, main unit internal check, attenuator VR replacement, crossover check)
Accessories: none
Main specifications: 2 way network, 500 Hz, 8 ohms
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
All 6 woofers and midrange edges have been replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
Fully maintained! 2-way floor speaker with a double woofer and 1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn coating, saran net replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, terminal cleaning/screw replacement unit detachment)
2023.12 Edge replaced
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound is captivating. The exterior has been beautifully finished due to maintenance. Serial 32547 32298 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 maintenance (exterior repair/cleaning, saran net cleaning, repasting, ATT cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Special Feature = CD Era Vacuum Tube Preamplifier/GEC DA30/MOS FET 1 Stone Power Amplifier/82' Audio Technology of the Year/Precision Processing Technology for Players/New JBL Driver 2445J/Large Diameter W Woofer 21 Models/Summary of Published Circuit Diagrams: Technics SU-V7A/HAFLER DH500/S58.3.1 Issued. The photograph is a sample, so the actual product may be broken, written, etc.
※Shipping service. From Bessatsu Stereo Sound JBL 60th Anniversary Table of Contents = JBL Visitor/JBL PEOPLE Interview: Paul Bente, Gina Herman, Sidney Herman, Yasuda Kotaro, Mark Gander, John Argle/JBL ORIGINAL CATALOG/ JBL ORIGINAL CATALOG/ JBL HISTORY AND HERITAGE/JBL Chronology 1872-2006/2006.10.31 published. Since the photograph is a sample, the actual item may be broken or there may be markings etc.
※Shipping service. No. 65 Special Feature = Premium Preamp vs. 72-Way Power Amplifier Compatibility Test/THE BIG SOUND = Westminster/New Arrival JBL L250, Diatone DS-5000 Audition Published on 1983.1.15. Published models: DIATONE/DS-5000 YAMAHA/NS-2000 INFINITY/REFERENCE STANDARD1 B&W/801F PROFESSIONAL STUDIO MONITOR, DM7 MK2 REFERENCE MONITOR, DM17 MINI MONITOR YAMAHA/GT2000L AUDIO-TECHNOICA/AT37E, AT700T ORTFON/MC2000, T-2000 JBL/B460, L250 ENTRE/EC-35 ONKYO/SCEPTER200 TECHNICS/SB-M2S VICTOR/ZERO100 ROGERS/LS-5 MARK LEVINSON/ML-12L, ML-11L ONKYO/INTEGR A-820GTR SONY/TA-F555ES TRIO/KA-2200 LINN/ BASIK SYSTEM THORENS/TD147 YAMAHA/MC-2000, HA-3 The photo is a sample, so the actual item may be broken, have marks, etc.