The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/13 sales price 2,980,000 yen Maintained with attention to details such as drivers and wiring! The Georgian 4 is attractive for its elaborate horn configuration and beautiful furniture-like design. It is a model with a built-in crispy horn, a structure that creates a unique sound with a rich sense of scale, and the loud sound is truly an American masterpiece, but you can also feel a somewhat English-like sex appeal. *The attenuator has been maintained, but slight chipping occurs when turning due to deterioration of the original winding resistance (Oikawa Tetsuji)
Maintenance information: 2023.9.13 Maintained (828HF disassembly and maintenance: separation from magnetic circuit and diaphragm, magnetic circuit diaphragm maintenance: cleaning of the magnetic circuit, rustproof vibration system, round out, stop noise, T350 disassembly and maintenance: separation from the magnetic circuit and diaphragm, sound pressure difference adjustment: stop noise due to resonance sound generation, elimination of sound pressure drop due to rear sound leakage. Confirm that there are no modifications inside the housing. Remove rust from screws on screw-type terminals, pickle, and polish and clean the receiving side. ATT (x4) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 4-way 15WK, 828HF, T350, X336 (300/3500) approx. W860 x D660 x H1,350 mm approx. 90 kg
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
Fully maintained! 2-way floor speaker with a double woofer and 1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn coating, saran net replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, terminal cleaning/screw replacement unit detachment)
2023.12 Edge replaced
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its rich sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (each SW, VOL cleaning, push button dismantling and cleaning, companion pot failure → replacement, lamp deterioration → replacement, panel peeling correction (text part is not possible), operation check (the gap cannot be completely removed)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
The price has been drastically reduced. 2024/5/24 sales price 248,000 yen Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
Disposal price reduction. 2013/9/16 sales price 298,000 yen longitudinal vibration SP special gramophone. serial 67906. Thomas Edison's rise to fame was the invention of the gramophone in 1877. If you think about the sound from 100 years ago, it's indescribably moving. Immerse yourself in your unique view of the world. The exterior has scratches, dirt, etc., and there is a cabinet crack on one side of the back (Oikawa Tetsuji)
Maintenance information: 2013.7.31 Maintained (brake shoe replacement, position adjustment, rotation system disassembly repair) *Normal SP cannot be regenerated. Please prepare SP (thick SP) for longitudinal vibration.
Accessories: handle, snail
Main specifications: horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
The disposal price has been reduced (member prices are not applicable). 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
The price has been drastically reduced. 2024/4/17 sales price 128,000 yen Maintained! Quad control amplifier The famous machine 44 has been refreshed by changing the back terminal to an RCA specification that is easy to handle. It's a perfect balance between freshness and richness. When paired with speakers made in England, you can enjoy a calm, high-quality sound (Daiki Goto)
Maintenance information: 2024.4.17 maintained (internal all checks, B-filter capacitor deterioration, +- 18V drive Tr leak large, rectifier diode failure instability → replacement power SW spark killer broken → replacement. C and R checks within each board. *There is a sound leak at main volume 0. (Create 2 1.5m DIN5 cables)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The price has been drastically reduced. 2024/5/9 sales price 128,000 yen Maintained in 2023/10! Late QUAD44 with CD input terminal. It's not flashy, but the thick, glossy tone is attractive. In particular, it softens female vocals. The exterior has a feeling of use such as dullness and small scratches. Serial Q031658 (Murakoshi Yoichi)
Maintenance information: 2023.10.22 Maintained (Acre sectorable terminal caulking defect? → soldering. Balance Vol, Filter Vol, SW Cleaning. AC spark killer NG, internal in-board bypass C, coupling C replacement)
Accessories: instruction manual, power cord, catalog (English)
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/27 sales price 148,000 yen Maintained! It is a model that is small yet has a calm and glossy tone. A combination with European speakers is recommended along with the company's Pre-44. A slightly more modern taste than the 405 has been added. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial Q078428 (Hiroki Aso)
Maintenance information: 2024.4.27 maintained (internal dismantling check, power Tr driver, Tr check, replacement of each C in the board, partial soldering, defect correction, bottom rubber foot mounting operation check)
Accessories: copy of instruction manual DIN to RCA (female) conversion cable, power cable (general purpose)
Main specifications: 100W+100W W341×H115×D195mm 9.0 kg
Disposal prices have been reduced. Member prices are not applicable. 2013/7/23 sales price 298,000 yen ※ longitudinal vibration SP special gramophone. serial 6083. The Thomas Edison Sound is now being revived after 100 years. I am impressed by the well-conceived metal horn system, rotation adjustment mechanism, volume adjustment mechanism, etc. in the old fashioned way. There are scratches etc. on the cabinet that make it feel old. It has been repaired to a level where there is no anxiety about playback. Can be used normally (Yasuhito Koshihama)
Maintenance information: 2013.2.17 Maintained (sound box repair, spring repair, rotation adjustment mechanism repair, brake repair) 2013.7.23 operation checked
Accessories: handle, snail
Key Specifications: The needle tip of the sound box is a diamond. Horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
The price has been drastically reduced. 2024/1/15 sales price 118,000 yen pair tube 45 special compatible ball straight heat triode fishing rod type filament made in America measurement value 90/86 (rejected value 55) with white box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price was lowered. Member discounts are not applicable. 2021/11/27 Selling price 148,000 yen The product around 1920 features a telescopic tone arm, needle pressure, and volume adjustment possible. 2-spring, oval straight horn The volume is not large, but the tone is delicate and coherent. The rotation is relatively stable, but there is sound cracking, so it is currently sold. The appearance has dirt scratches of age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 operation confirmed
Accessories: handle
Main specifications: W440 × H380 × D520mm 17.9kg (actual measurement)
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
*The woofer edge is deformed, the center cap is dented, there is an ATT crack, and there are footprints on the top plate, etc., so it is inexpensive and is sold as is. A floor-type speaker with a porous metal cone that realizes all-metal in the entire band. From the unit to the enclosure, this is a masterpiece that incorporates technology and cost as if Otto's intention were shown. The rich, natural sound is attractive. The enclosure also has scratches, chipped corners, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers 8Ω 93dB W450 × H910 × D430 mm 51 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/24 sales price 118,000 yen Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. There is a feeling of use due to aging (Daiki Goto)
Maintenance information: 2023.10.18 Maintained (insufficient capacity of the filter C in the power supply, coupling C in each board, bypass C, etc. → all replaced. Each Vol, SW Gari → All Clean Power cord creation.)
Accessories: power cable, connection cable, copy of instruction manual
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Pair tube direct thermal triode made in England measured value 54/50 (rejection value 39) with replacement box The plate shape of the spring fixing part on the top of the head is slightly different on the left and right, and there is discoloration on the plate on one side ※ The pair was determined based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The price has been reduced. 2024/2/14 sales price 99,800 yen Maintenance completed! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function), high pass, low pass filter (2 levels each), etc. (Oikawa Tetsuji)
Maintenance information: 2024.1.16 Maintained (NG diode disconnected due to fuse in the main unit → short circuit in the remote control wired cord connector section → replacement, operation check)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input (mm) W321 x H80 x D255 mm 3.3 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/9 sales price 128,000 yen One side tweeter has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
Maintained! Mono cartridge OFD25 initial type for EMT arms. The sound quality is clear and tight, and it has a strong thickness unique to mono. While it has a characteristic European luster that can be seen at every end of the sound quality, it reproduces the sound of the source without coloring. *Since it is mono, the output is Rch only, so please use the amplifier's mono switch. The exterior is dull. Serial 7199-00 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (cantilever bending correction)
Accessories: original box
Main specifications: MC type needle tip diameter 25 μm diamond needle impedance 37 Ω (right output) needle pressure 5 g output voltage 1.15 mV frequency characteristics 30 Hz to 15 kHz tracking angle 90 degrees dead weight 33 g