*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
The price has been reduced! 2024/6/10 sales price 79,800 yen with horseshoe ring. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the outside, oxidation can be seen on the horn part. Serial 104837 104761 (Tomonori Asae)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 8.9/9.1 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Maintained in December 2019! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: W600 x H1200 x D230 mm 16.5 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Main specifications: W600 x H1200 x D230 mm 16.5 kg
The price has been reduced! 2024/6/11 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good, although there are very few minor scratches on the top plate. Serial AUY15230905053 (Takahashi Nobuyuki)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
Harmonic resolution stabilizer. By placing an analog disc on the turntable shaft, resonance of the LP record itself, vibration due to air propagation, and noise caused by vibration of the record player itself are suppressed. The synergy effect with the isolation bass is remarkable, and you can expect rich sound quality and consistent low-level performances (Tamai Jun)
Accessories: original box instruction manual
Main specifications: size φ82.5 mm x H34.3 mm weight 315 g
An improved model of the S-77TWIN that adopted the vertical twin system. With a large sound field and clear sound image localization, there are few differences in sound, and it sounds smoothly and in a well-balanced manner, so you can enjoy it regardless of genre. The exterior has a feeling of use such as dullness, scratches, and cracks in the saran net. Serial JK0424 JK0425 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 3 speakers, 18 cm cone type for low frequencies x 2, 2.5 cm dome type, vertical twin, bi-wiring compatible for high frequencies, 6 ohms, 35 Hz to 40000 Hz, 91 dB/w/m, W268 x H960 x D376 mm, 29 kg
An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
TRIO premium FM tuner equipped with a valuable 9-speed vari-controller. High sensitivity and thick sound typical of a high-end aircraft. The high level of construction, which is particular about the texture of the knob and dial, is also a first-class product. The 15 kg body is just like a preamp. The exterior has a feeling of use such as dullness and small scratches. Serial 910367 (Tomonori Asaine)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: copy of instruction manual
Main specifications: reception frequency 76 MHz to 90 MHz antenna impedance 300 ohm balanced/75 ohm unbalanced W460 × H161 × D463 mm 15 kg
An upper and lower pin structure is used to make the pressure at the contact point uniform. Contact surface stabilization is achieved with a spherical washer. High rigidity is maintained by completely machined super duralumin and manufactured in an integrated manner up to the finger holder (Asae Satoshi Method)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Main specifications: Super duralumin fully integrated machined body, black nickel plating, weight 10.5 g (lead wire not included), 11.0 g (lead wire included)
optical cartridges. The cantilever has become boron, and I feel that the overall density, especially in the low range, has increased. The quietness and sense of speed that makes you forget you're listening in analog for a moment have been particularly improved, and it's a convincing degree of perfection that it can be positioned as a new reference (Asaine Tomoho)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: original box screw hex wrench
Main Specifications: Power Generation Method Photoelectric Cantilever Boron Body Material Machined Aluminum Needle Pressure 1.85g-2.05g (Recommended 1.95g) Weight 7.9g
The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in each of the 4 types of 1.0 m pair, 7N ultra-thick high-purity copper wire AgA silver-plated annealed copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
The stand is made of magnesium alloy, and the bottom plate has a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment has been applied (Asae Tomo Law)
Accessories: none
Main specifications: top plate W160 x D210 mm bottom plate W220 x D270 mm height 700 mm weight 8.5 kg
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your own liking (Tomoho Asaine)
Accessories: none
Speaker cable is an abnormally thin cable for an unprocessed speaker cable with a 3.5 m pair end. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your own liking (Tomoho Asaine)
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.2 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable 2.0m pair genuine molded plug, the honest, thick, and powerful sound with medium and low sounds that are unimaginable from the way they look is addictive (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained! Comes with a remote control! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is in a state where there are many signs of use, such as dullness and scratches over time. Serial MZ02722110037 (Yamato Yuki)
Maintenance information: 2024.6.13 maintained (tray slide motor belt, CD standby motor belt replacement, bypass C replacement in other servo boards, operation check)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Sonas Faber's current speaker, Lumina 1, is here! Not to mention the high level of design typical of Italian products, the sound structure and high sense are truly a word. Please try it by reproducing a compact yet rich sound field and a smooth high frequency with a high sense of transparency. The condition is generally good. Serial 2870 2870 (Yamato Yuki)
Maintenance information: 2024.6.14 sweep test good
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, crossover frequency, 2 kHz, frequency characteristics, 65 Hz to 24,000 Hz, output sound pressure level, 84 dB, impedance, 4 ohms, W148 x H280 x D220 mm, weight 4.5 kg/book
Maintained in 2023/12! A stereo power amplifier that takes into account ease of use in multi-channel systems, a must-see for multi-channel systems! Contrary to its cute size, it has quite a bit of driving power. The sound is energetic and fresh, just like Sony of this era. There is a feeling of use on the exterior such as line damage or dullness. Serial 205245 (Tomoho Asaine)
Maintenance information: 2023.12.5 maintained (power supply micro SW deterioration replacement, semi-fixed VR replacement for bias adjustment, input RCA terminal L/R poor contact exchange transistors with noise at 2 locations, other DC bias adjustment connection sound confirmation)
Accessories: none
Main specifications: 40W+40W (8Ω) W200×H149×D320 mm 6.5 kg
Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg