Nagaoka record cleaner. High-density velvet fits the sound groove of the record board and removes dirt. As for the exterior, there are dirt and scratches on the case (Tomoho Asae)
Main specifications: body dimensions W115 x D42 x H35 mm 40 g (actual measurement)
Cover is missing. Unspecified digital needle pressure gauge. It is a digital needle pressure gauge that can measure up to 5g in 0.01 g increments. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: none
The flat characteristics make the sound good and are delicate. The sound quality is relatively thick among Audio-Technica models, and I like it without losing too much weight. The cantilever is slightly to the right. There is dirt and dullness (Hiura Katsuji)
Maintenance information: 2024.2.23 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.75 g oval needle self weight 9 g
※Since there are no compatible cartridges, it has not been checked. Audio-Technica SP exclusive replacement needle. For those who use AT-3M, please use it as stock (Kobayashi Hitoshi)
Accessories: original box
Main specifications: 2.5 mil diamond needle, standard needle pressure 2 to 3 g
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
The price has been reduced! 2024/4/18 sales price 500 yen*It's cheap because it deteriorates drastically! Audio-Technica record cleaner. High-grade velvet can be used to clean records gently and effectively. It's also perfect for those just starting to arrange records. The exterior shows a feeling of use such as dullness, etc., and wear on the velvet (Asaine Tomoho)
Accessories: none
Set of 4 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are a few small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are a few small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
RCA cable uses 1.5 m pair of out-of-print conductors and single crystalline high-purity oxygen-free copper PCOCCC with theoretically zero crystal boundaries for all core wires, braided wires, and plug pins. The shield is rolled up on the plug attachment part, it is dull, and there is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
Speaker cable is a basic type of high-purity OFC cable with unprocessed 1.3 m pair ends that are easy to use, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
An introductory cable with 1.5 m pair untreated ends that are soft and easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Speaker cable 2.8 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Speaker cable 3.0 m and 2.2 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are unique to mono (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, stains, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
2022.9.10 This is the first 607 model that has undergone full maintenance, such as replacing capacitors, transistors, and SP terminals! It's one that makes you feel the intricacies unique to the heyday of audio. You can feel the strength of extrusion in the low range when playing LP records and the dynamic sense of dynamism with an intonation in the middle range, which is unique to the golden age of SANSUI. The exterior has dullness and small scratches. Serial 227050109 (Yonejima Satoshi)
Maintenance information: 2022.9.10 Maintained (electrolytic/tantalum capacitors, transistors, SP terminal replacement, RCA terminal polishing. Board cleaning and re-soldering. SW/VR disassembly and cleaning, application of grease to prevent oxidation and sulfation, replacement of tantalum capacitors, electrolytic capacitors, transistors, and heat dissipation sheets in the EQ/TONE section. Semi-fixed resistor, cement resistor, fuse resistor, fuse, relay replacement. Input waveform confirmation, load test (1kHz sine wave, 8Ω load: 65W+65W OK) sound output test)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*It takes about 15 to 20 seconds for the relay to operate)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
This is Belldream Cartridge Keeper BD-CK2A. It comes with a headshell and can hold 2 cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 ✕ H120 ✕ D90mm 160g
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The price has been reduced. 2024/5/10 sales price 42,800 yen This 2-way bookshelf with monitor audio will be introduced for the first time at Hi-Fi. The C-CAM unit introduced in the Bronze Series pursues sound quality. The high cost performance and sound typical of the company are attractive (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: instruction manual, saran net, bass reflex sponge, jumper, rubber feet, original box
Key Specifications: 2 Way 8Ω 85dB Crossover 2,500Hz W166 × H281 × D268 mm 5.0 kg
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The core model of the high-grade power plug “PC Series”. All PSE standard parts are completely non-magnetic. Due to the characteristics of silver+rhodium plating, it has high resolution, high response, and wide range characteristics. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL))
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
accessories:
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/6 sales price 218,000 yen ※The exterior is in poor condition, so it's cheap. Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. disassembly contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (each SW, VOL cleaning, push button dismantling and cleaning, companion pot failure → replacement, lamp deterioration → replacement, panel peeling correction (text part is not possible), operation check (the gap cannot be completely removed)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
An attractive CD player with a smart design and stable playback ability while being inexpensive. You can enjoy music without getting tired with a smooth, bright tone. The exterior is generally dull and has small scratches. Serial C72PJ1136 (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cable
Main specifications: digital output/coaxial 1, optical 1 analog output/1 system W430 × H85 × D290 mm 4.4 kg
Maintained! Even though it was an entry-class CD player at the time, I felt that it was well-made. You can enjoy clear, tight low range and high frequency sound with good visibility. Many abrasions can be seen on the exterior and sides, and there are also small scratches, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.10.30 Maintenance completed (servo mechanical disassembly, rail, pickup oilless metal rust removal polishing. Tray drive belt replacement. Optical lens cleaning (Output VR cleaning)
Accessories: remote control, copy of instruction manual
Main specifications: center mechanical mount system D/A conversion method advanced H.D.L.C advanced pulse D/A converter score digital filter W430 x H125 x D375 mm 12 kg