Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
A full-range speaker with a high BOSE interior. 1 bottle only An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*It takes about 15 to 20 seconds for the relay to operate)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The disposal price has been reduced! (Member prices are not applicable) 2024/5/20 sales price 348,000 yen ※The center cap has many wrinkles, so it's cheap. Woofer edge softening treatment! Comes with a dedicated stand DK-10000 sold separately. Diamond Tone 40th anniversary model DS-10000 klavier. A limited-edition model of 300 sets created by infusing all the sensibility of the company's engineers into a beautiful piano finish reminiscent of crafts. It is a masterpiece that pursues even the smallest sounds one by one. In addition to dullness and scratches on the exterior, there is a feeling of use such as dents on the scoker cover. Serial 13467 13468 (Hiroki Aso)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: dedicated stand (DK-10000)
Main specifications: 3-way 3-speaker sealed bookshelf type usage unit/27cm aramid honeycomb curved cone type, 5.0 cm boron D.u.d. dome type, 2.3 cm boron D.U.d. dome type, 6Ω 35 Hz to 60000 Hz crossover 600 Hz/5000 Hz dimensions W360 x H625 x D290 mm weight 27 kg
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Maintained! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to a thick, analog-like sound quality that comes out well. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 21120262 (Jun Tamai)
Maintenance information: 2024.5.19 Maintained (motor bearing oil replacement deteriorated parts (electrolytic capacitor semi-fixed resistance rectifier diode) replacement tone arm disassembly/shaft bearing replacement lifter disassembly/grease up speed switching SW rotation fine adjustment volume disassembly/contact polish since the insulator has deteriorated, replaced with a replacement product turntable rotation speed confirmation arm operation needle pressure confirmation exterior cleaning sound output test (Other operation confirmation dust cover newly created)
Accessories: instruction manual overhang gauge
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Maintenance has been completed, such as replacing capacitors and replacing deteriorated parts! It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid-high range has a different appeal from the MC275. The exterior has a feeling of use over time, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.19 Maintained (volume curing improvement treatment for TWIN, 2W oil capacitor replaced with 0.01μF, 3W oil capacitor replaced with 0.5 μF, missing thermistor, replacement, 250μF, domestic CE replacement, block capacitor 100/30 μF defective replacement, oil capacitor 0.22 μF defective replacement electrolytic capacitor 20μF, etc. Deterioration replacement resistor 2W deterioration replacement Vacuum tube socket and RCA jack caulking repairs ※ Other operation checks have been performed (measured at 41 to 58 W with rated output AC 100 to 117 V, SP: 8 Ω) ※ The power transformer groans a little, but there is no problem with performance)
Accessories: A copy of the English instruction manual
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
*Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
The disposal price has been reduced. Member discounts are not applicable. 2024/5/19 sales price 398,000 yen ※The spike holder is a non-genuine product. A premium CD player in WADIA's heyday. The transport part is equipped with a TEAC VRDS version CMK3 mechanism. The DAC section also boasts such quality that it was later made independent as WADIA 25. The biggest appeal is the sticky mid-low range, which is different from ESOTERIC's sound quality. It can also be used as a D/A converter. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, instruction manual, power cord, spike holder (external product), original box
Main specifications: Esoteric VRDS system CMK3 D/A converter can be used W432 x D408 x H155 mm 20 kg
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained. An impressive pre-main with a glossy, elegant sound. The advantage of being equipped with MOS-FET is that visibility is good, and the good balance without feeling a sense of loss in sound is attractive. It is a model that can be enjoyed regardless of genre. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (speaker relay replacement, push SW replacement due to sound interruption when switching MUTING switches, replacement volume with replacement volume for sound output, other INPUT selector electric SW, Cartrich LOADSW, speaker rotation switch, direct INPUT switch, polishing and cleaning grease application for each disassembly contact, DC balance DC bias adjustment, due to large internal dirt (Since it is a VR replacement for cleaning and volume, the volume cannot be changed with the remote control since it is not electric)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) W470 × H165 × D435 mm 21.3 kg
※ Because it is cheap, it is currently sold. JBL 2-way speaker. It is a large, well-balanced model that is easy to use. It is also recommended as a speaker for BGM in stores, etc. On the exterior, there are stains and adhesive marks on the edges. Also, there are some holes on the sides. Serial 121213353121213 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: grill net
Main specifications: W152 × H232 × D140 mm 2.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/18 sales price 79,800 yen ※It is cheap because the saran is torn or the speaker terminal LF+ on one side does not tighten until the end. Slim tall boy speaker MONITOR AUDIO's middle class, SILVER series, is now in stock. The RS8 has a delicate, highly clear mid to high range tone with good tightness in the low range. The owner has well-balanced characters that can be used from the living room to the tatami room. In addition to dullness and small scratches on the exterior, there is a feeling of use such as a tear on the saran net and sunburn on the main body. Serial 801702/801702 (Tomonori Asae)
Maintenance information: 2024.5.17 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: Format: 2.5-way 4 speakers, floor type (anti-magnetic), front & rear port, bass reflex impedance, 6 ohms, allowable input, 175 W, efficiency, 91 dB, frequency characteristics, 33 Hz to 25 kHz, W185 x H900 x D 270 mm, weight 21.0 kg
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
The price has been drastically reduced. 2024/5/17 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. In addition to large dents on one side, there is a light feeling of use and dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 128,000 yen ※Depending on the arm base, the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g
The disposal price has been reduced! Member prices are not applicable. 2024/5/17 sales price 99,800 yen ※The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
C-Quenze series woofers are in stock from Danish Audio Technology. Strong magnets are combined with soft edges and dampers to produce an amazingly rich finish and firm bass. Serial 26877, 26883 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: aperture: 15 cm, impedance: 8 ohms, output: 120 W, efficiency: 88 dB, outer diameter: 155 mm, depth: 74 mm, opening dimensions: 131 mm, weight: 2.0 kg
The price has been drastically reduced. 2024/5/17 sales price 24,800 yen. Q ACOUSTICS 2-WAY BOOKSHELF. Once the setting is decided, you can enjoy a variety of music genres with a sense of scale that makes you doubt the size. There are dents around the upper corner on one side, and there is slight dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, rubber feet
Main specifications: 2 way 6Ω 88dB W170 × H260 × D226 mm 4,6 kg
There is a slight gap in volume, but it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its rich sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Sold 1 bottle EL34 compatible ball, made in Japan, black plate, measured value 52 (rejected value 30) with original box, there is a slight getter burn ※ pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained by the manufacturer! Marantz Primaine has an attractive thin and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers also go well together, so you can choose any music genre. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.16 Checked by the manufacturer
2023.12.3 Maintained by the manufacturer (Source Direct has gaps. No parts are available. Contact cleaning. Power switch movement correction (because it is not available). (Other operation checks)
Accessories: remote control, instruction manual, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/16 sales price 598,000 yen The version has been upgraded from DS/K1 to K3. A model equipped with KATALIST that has adopted a new clock architecture. Similar to the higher-level model KLIMAX DS/3, DSD can now also be played natively, and the range of playback has greatly expanded. It is a degree of perfection that is close to the height of the KLIMAX DS, such as improvements in power supply to the DAC and processor sections by examining the circuit layout. There is a line scratch on the display (Murakoshi Yoichi)
Maintenance information: 2024.5.15 sound output confirmed
Accessories: instruction manual, original box
Main specifications: Playback formats: DSF, DFF, FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS (same as DS and other models) Compatible resolution: 7.35-192 kHz, 16-24 bit (similar to DS and other models) DSD64 (2.8224 MHz) /DSD128 (5.6448 MHz) compatible analog audio output: XLR balanced, RCA unbalanced (fixed/variable output) Digital audio output: 75Ω, BNC, 1 line, EXAKT LINK2 system, W380 x D380 x H91 mm, 5.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 498,000 yen Maintained! New Recutural York with HPD385 in the original box. All refreshed after network capacitor replacement, unit overhaul, and enclosure maintenance! The sound of the box is very rich. The piano overtones are pleasant! The golden cheek finish, which is typical of Tannoy's vintage, is reminiscent of an English sound. The balance between the 15-inch unit and enclosure volume is excellent, and there is no dubbing, yet it draws in a way that is scaled. The exterior has been beautifully finished due to maintenance
(ASAINE Tomonori)
Maintenance information: 2024.5.16 Maintained (exterior repair/polishing/clear finish, saran net cleaning/repasting, ATT frame plate painting
Unit maintenance (low frequency edge replacement, magnetic circuit rust removal/horn coating/gap cleaning/center adjustment, fastener polishing, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment) Unit detachment network maintenance: frequency characteristic check, ATT cleaning, terminal/4 pin terminal cleaning)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Maintained! JBL's 2-way network. An essential item when adding a tweeter driver to a full range unit such as the D130. The exterior has paint peeling and dullness. Serial 39585 38470 (Tomonori Asaine)
Maintenance Information: 2024.5.16 Maintained (12 Terminal Mounting Screws, 24 Insulating Bushings, Terminal Cleaning, Attenuator, VR Replacement, Crossover Check)
Accessories: none
Main specifications: 2-way network 8 ohm crossover 2,500 Hz W121 × H153 × D93 mm 0.7 kg
Maintained! A network using excellent parts such as high-voltage nonpolar capacitors and coils using low-loss Orient Cores. The cross is easy to use at 500 Hz, and it is a very easy to use network for those who are assembled with drivers such as 375 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (12 terminal terminal mounting screws, 24 insulation bushings, terminal part cleaning, main unit internal check, attenuator VR replacement, crossover check)
Accessories: none
Main specifications: 2 way network, 500 Hz, 8 ohms
Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The length of the pole has been changed from the original. Scratches are conspicuous (Daiki Goto)
Accessories: instruction manual
Main specifications: W600 x H920 x D520 pole length 350, 250, 200 mm weight 21 kg (actual measurement)
All 6 woofers and midrange edges have been replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
This is a high quality line cord that takes advantage of the characteristics of 4266, a 1.0m pair of RCA cables with a four-core shield structure (Tamura Eiji)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories