A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. There is a crack in part of the plastic that covers the magnet on the saran net (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
※There is no problem with operation, but the phono cable and original box manual are missing, so it's cheap. There is also only 1 weight. This is a masterpiece arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: none
Main specifications: static balance type, total length 333 mm, effective length: 237 mm, overhang: 15 mm, needle pressure range: 0 to 3 g (0.25 g steps), compatible cartridge, dead weight: 3 to 17 g
This rack is similar to a GT rack. It is sturdy and has a rugged construction. It's also heavy and well-built, so you can set up a heavyweight amplifier. The upper half is a type that is connected with a dowel so it can be removed. The exterior has peeled off the veneer and is scratched ※A separate shipping fee will be charged, please contact us when shipping (Sasaki Shota)
Accessories: none
Main specifications: W660 x H745 (445+300) x D560 mm 66.8 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The cantilever is slightly to the right (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. It has a supple sound and is comfortable to listen to. The needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
Equipped with a WD RED 3TB x 2 HDD. It is currently SHR mirrored. Equipped with an 8th generation Intel Celeron J4025 2-core CPU (2.0 GHz, maximum 2.9 GHz). Until recently, it was used as sound source storage for Roon. There is a line wound on the front desk (Yasuhito Koshihama)
Maintenance information: 2024.6.13 storefront operation confirmed
Accessories: power adapter
Main specifications: Intel Celeron J4025 64 bit 2 core CPU system memory 2GB DDR4 non-ECC (maximum 6GB 2GB+4GB) LAN x 2 ports (1Gb) 3.5 inch SATA HDD x 2 bays W108 x H165 x D232 mm 1.3 kg
Roon Rock installed. Equipped with an M.2 SSD 250GB x 1 for startup and 16GB x 1 memory. Equipped with a 10th generation Core i7 with 6 cores and 12 threads. We provide a comfortable Roon Server with high sound quality (Yasuhito Koshihama)
Maintenance information: 2024.6.13 storefront operation confirmed
Accessories: power adapter, original box
Main specifications: Equipped with CPU 10th generation Core i7-10710U
Output transformer pairs for sale for heavyweight large transformers, primary: 3.5 kΩ, secondary: 4-8-16 ohms, W150 x H185 x D150 mm, 11.2 kg/piece (actual measurement, not including protrusions) there are hook scratches in places (Kojima Yosuke)
Accessories: none
It seems to be a Tektron interstage transformer, but detailed specifications are unknown. Pair sale primary: 10 kΩ secondary: 10 kΩ x 2 W80 x H100 x D70 mm 1.4 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
※The manufacturer logo on the front is missing, so it's cheap. Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. There are scratches, bumps, dirt marks, etc. on the exterior. Serial 613082601 (Tamura Eiji)
Maintenance information: 2024.6.13 maintained (input selector, etc., switch dismantling and polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor), output relay replacement, protector part capacitor replacement, power amplifier part resistor replacement, interior and exterior inspection and cleaning, operation confirmation)
Accessories: none
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
6N copper wire with multiple gauge (wire diameter) structure is used to improve performance as a 1.0 m pair conductor of the RCA cable. You can enjoy the clear and fresh MIT sound even with this entry model. The exterior is dull and some characters are missing (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.5m PSE standard power cable is a full-tech FI-25 plug, and the sheath uses new materials that respond to environmental issues in 2006. The mid to low range with horsepower is recommended for jazz and rock fans. The exterior is good (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The XLR cable uses 1.0 m pair of high-purity silver wires and a multi-shield structure of Gore-Tex, copper foil, and Teflon. The high level of transparency that is clear and has no peculiarities is attractive. Fits a wide range of devices. (YONEJIMA Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
Speaker cable 1.8 m pair with Y lug specification at both ends is a speaker cable representative of TMD. Constructed of carefully selected vintage wires typical of the company. The richness and realism of the mid-range is an appeal that cannot be experienced anywhere else. The thicker one is negative, and the thinner one is the positive side. There is rubbing on the spade plug (Tamura Eiji)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
RCA cable 1.5m pair with AC adapter Synergistic Research's top-grade reference series entry model. 2-core twist construction The clear, three-dimensional, and realistic sound images unique to Synergistic are appealing. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: AC adapter
Speaker cable 2.0m pair end Y lug specification An old type of speaker cable using carefully selected vintage wires. Each has a different structure on the HOT and GND sides. Clear sound with good separation. The exterior has frayed cloth (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: none
1.0 m pair of RCA cables Premium RCA cables using vintage single wires that TMD specializes in. It has the vivid, wild strength typical of vintage wire, and the dynamic sound is attractive. There is a cloth stain on the exterior (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: No accessories
Thoroughly review the interior and carry out maintenance on capacitors, transistors, etc.! A vintage model representing JBL. In addition to the extremely powerful and well-extruded sound quality, it also has a dry and tight tone unique to this era. The strong sense of energy in the low frequencies and the characters with clear outlines are excellent matches with old JBL speakers. It is a vintage masterpiece that stands out for its individuality. There is a slight feeling of use on the exterior. Serial 2362 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (test switch contact defects, other internal checks. DC leak due to leaks such as C in both ch couplings, poor Tr characteristics in the pre-stage, poor characteristics of the power stage Rch transistor x 1 → replacement. (Each VOL rotary SW is large → all cleaning, ~ operation check)
Accessories: instruction manual (copy), power cord
Main specifications: 40W+40W (8Ω) W412 × H128 × D350 mm 11.8 kg
Maintained! This is a Baes regular model 100V specification. The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. In addition to a small scratch on the upper right front and a stain on the top surface, there is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (GAIN VOL replacement, power stage Tr check, driver board Tr.C, meter, power supply board C replacement, MODE SW dismantling and cleaning, meter display lamp replacement)
Accessories: power cord, instruction manual (copy)
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Serial 830693 (Murakoshi Yoichi)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: original box, needle cover, brush
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box, characteristic table
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
This high CP model was released in the 49th year of Diatone's founding. It has a very well-balanced, rounded, and gentle tone. You can do everything from jazz and rock to classical and pop music as an all-rounder. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents on the grill. Serial 18671 18688 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
An improved model of the S-77TWIN that adopted the vertical twin system. With a large sound field and clear sound image localization, there are few differences in sound, and it sounds smoothly and in a well-balanced manner, so you can enjoy it regardless of genre. The exterior has a feeling of use such as dullness, scratches, and cracks in the saran net. Serial JK0424 JK0425 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 3 speakers, 18 cm cone type for low frequencies x 2, 2.5 cm dome type, vertical twin, bi-wiring compatible for high frequencies, 6 ohms, 35 Hz to 40000 Hz, 91 dB/w/m, W268 x H960 x D376 mm, 29 kg
A rare item! Comes with an engraved plate This is the first time it has arrived in 13 years. Like a BBC monitor, the dense mid range with little coloring and the low range where the sound of the box is effective are impressive. You can enjoy the fresh sound, which has quite a bit of momentum. This is one I want to make a noise with a vintage tube amp. The exterior has a different texture on the left and right, and there is dullness, dirt, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: cable
Main specifications: BBC monitor GEC tweeter x 2 +15 inch RCA woofer W580 x H770 x D320 mm 25.6 kg (actual measurement)
Built-In Phono Equalizer Unit Equipped with a high performance high gain equalizer. The internal dip switch allows switching between MM and MC, and the MC input impedance and subsonic filter can be set to ON and OFF.
Maintenance information: 2024.6.10 Operation confirmed
Accessories: none
Main specifications: Compatible models C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, etc. [MM type cartridge] gain 36 dB, input impedance 47 kΩ [MC type cartridge] gain 62 dB, input impedance 10/30/100 Ω switching E-550 E-350 E-450 C-2110
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is dull. Serial 5997 (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: No accessories
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Stress-free processing that maintains the atomic arrangement in a healthy state at all times due to the unique self-annealing of the 1.0 m pair of RCA cables. It is a cable that enables strict and extremely accurate digital transmission. On the exterior, there is a small scratch on the terminal (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
The 1.0m pair of RCA cables are thick, but they are easy to bend and easy to use. A beautiful sound spreads out, and S/N is further increased by connecting to the ground due to the type environment where the thickness increases (Tamura Eiji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which combines resolution with a natural, good tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model of the 1.0 m NBS digital XLR cable in the SIGNATURE series. This high CP model is popular among JAZZ and ROCK fans, which is characterized by the thickness of the sound image unique to NBS and the high sense of energy. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
*Mid-range model of 2.0m PAD with No. 2 HOT XLR cable. A high CP model with excellent smooth, textured mid-high range and three-dimensional spatial expression. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model of the 1.0 m pad digital RCA cable. A high CP model with excellent smooth, textured mid-high range and three-dimensional spatial expression. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
*This model uses 1.0 m pair plasma (powder of metallic compounds) shielded by the No. 3 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10005476 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Digital RCA cable 1.0m TARA LABS digital cable This cable is popular among enthusiasts for its clear and straight sound. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
A standard wire world model with a wide 1.5m pair range and a smooth RCA cable. It allows you to enjoy music in the glossy, colorful mid- to high-frequency range. The exterior is dull and slightly sticky (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
A wireworld RCA cable that uses OFC copper as the 1.0 m pair conductor of the RCA cable, perfect for a basic model. It is a cable with the feel of a wire world, with thickness in the mid range and glamor in the high range. As for the exterior, there is a screw on the plug (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories