Comes with a headphone stand! A popular headphone system that allows you to enjoy fine, grainy tones. Combined with a tubular condenser headphone driver that firmly brings out the headphone's performance. There is no doubt that you will be completely immersed in the music. There is slight deterioration in the head pad (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, power cord
Main Specifications: SRM-T1S: Frequency Characteristics DC to 44kHz Input RCA x 2 XLR x 1 W195 x H103 x D375 mm Lambda NovaSignature: Electrostatic Type Diaphragm Film Thickness 1.5 Micron Playback Frequency Band 7-41,000 Hz Sensitivity 100dB/100VR.M.S Cord 2.5 m Parallel Wide PC-OCC Weight 472 g (cord included)
A speaker incorporating Nautilus series technology. CDM1 special edition model. The spatial expression unique to B&W and the soft and supple high frequency sound quality of this series make you feel safe and immersed in music. In addition to the exterior and sunburn, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: saran net, jumper, bass reflex sponge outside only (with deterioration) instruction manual
Main specifications: 2 way 2 speakers, 8 ohms, output sound pressure level 88db, W220 x H370 x D274 mm, 8 kg
Audio-technica/W series headphones made of beautiful wood. The housing is made of shaved solid wood from “Hokkaido Asada Sakura,” so you can enjoy a very delicate and warm sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: Sealed dynamic type new wing support, frequency characteristics, 5 Hz to 30 kHz sensitivity, 100 dB/mW, allowable input: 2,000 mW, impedance: 48 ohms, input plug, φ6.3 mm, cable length: 3 m, weight (without cable): 350 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. The exterior is frayed on the cable, and in addition to the black sheath being wrapped around it, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Comes with original box! late model. By dumping the center of the record board, warping and fine vibrations are suppressed. The main body and 8 sub-weights have a structure where they are held down by rubber that acts as a damper, preventing inherent resonance.
Accessories: original box
Main specifications: brass/chrome finish, external dimensions 68 x 128 mm, 550 g
※The current situation is that there is a slight sound leak even when ATT is squeezed out. Audio pro subwoofer If you're thinking about using a subwoofer for the first time, I recommend it! On the exterior, the SP terminal has faded due to sunburn, there is a floating veneer sticker in the lower right corner, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed (sound output OK. (The current situation is that there is a slight sound leak even when ATT is squeezed out)
Accessories: saran net, instruction manual
Main specifications: ACE-bass amplifier built-in bass reflex amplifier output 100W RMS 20cm woofer playback frequency band 27 to 100 Hz W329 x H360 x D365 mm 12.7 kg
It is placed in the corner of the room and plays a role in adjusting the sound field, such as absorbing and diffusing excess bass. The sense of scale has been improved, and it also creates a three-dimensional effect. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: H1520 x radius 250 mm weight 12.50 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Unspecified speaker stand. It's heavy and well-built. If you're looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W240 x D242 mm W280 x H630 x D340 mm 15 kg (actual measurement)
*Currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is well-built and MM/MC compatible. Recommended for modern systems without phono input. In addition to the exterior and cigarette smell, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: AC power
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check)
Accessories: cartridge
Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. Exterior, there are only 3 banana red and black caps on the SP terminal, and in addition to the jumper cable being general-purpose, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It has been replaced with a cloth edge. Currently sold. Onkyo's 3-way bookshelf speaker The stretchiness of the mid-high range, which is typical of Onkyo, makes me feel comfortable listening to vocals. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 sound output confirmed (replaced with cloth edge)
Accessories: saran net
Main specifications: 3-way bass reflex 6Ω 91 dB W380 x H670 x D363 mm 34 kg
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
The price has been reduced. 2024/6/16 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) playback frequency band 5Hz to 50kHz input: PHONO (MM, MC) 1 system, 4 analog systems W440 x H168 x D453 mm 21.5 kg
Comes with original box. Good needle tip! An original needle! The final model in Shure's pinnacle V15 series. With the amount of information close to the MC produced by the microridge needle tip, the sound cuts through with the goodness of the grain. Please enjoy jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 3.0 mV playback frequency range 10 to 25,000 Hz, proper needle pressure 1.5 to 1.75 g (optimal 1.5 g) dead weight 6.6 g
The price has been reduced. 2024/6/16 sales price 298,000 yen The sound is enveloping, and there is sex appeal in the glossy mid-high range. It also excels at reproducing acoustic instruments, so you can enjoy vivid playback sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: rear bass reflex type frequency characteristics 28 Hz-22 kHz 91 dB 4 Ω crossover 110 Hz, 2,500 Hz W190 x H1085 x D400 mm 32.5 kg
*Currently sold. Although it is small and compact, the sound quality can truly be called a celebration. The sound quality is smooth and warm, so you won't get tired even if you listen to it for a long time. Feel free to enjoy classical music and vocals. The exterior has line marks and dullness. Serial 656558/656560 (Takasaki Atsushi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: saran net
Main specifications: 2-way sealed 2.5cm titanium dome tweeter 15cm woofer impedance 8Ω efficiency 88dB W206 x H350 x D250 mm weight 4.7 kg
RCA cable, 1.0 m pair, 6N copper conductor, and a luxurious specification using 6N material for the shield. It is a cable with resolution and natural sound quality perfect for high-resolution playback (Yoichi Murakoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N copper, 2-core conductor, aluminum shield. It is a cable suitable for vocals with just the right balance between sound loss and mid-range thickness (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable 1.2m pair 6N copper collet chuck plug with straightforward sound quality that honestly brings out the individuality of a system without dramatization typical of the 6N. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 3-core blade structure, uses high-purity copper. Although it is a model positioned as an introductory grade, you can enjoy the sense of dynamism and stretch of sound typical of Kimber (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/15 sales price 398,000 yen A parallel push-pull mono power amplifier using EL34. The delicate, clear sound with good visibility is still wesugi! The perfect balance and expressiveness of the warmth and transparency typical of a vacuum tube is attractive. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: Parallel push-pull operation rated output 40W (continuous output) output impedance 4Ω, 8Ω, 16Ω playback frequency band 20Hz to 20kHz W435 × H232 × D175 mm 22 kg
※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good. Serial AWY15201102862 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: remote control, power cord
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu)
Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 maintenance completed (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone that has a strong warmth in the bass and mids, and you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back. There is a slight distortion in the lever. Serial 1611070 (Kanai Hidetsugu)
Maintenance information: 2024.6.11 maintenance (replacement of some parts and vacuum tubes, confirmation of input/output waveforms, load test (1 kHz sine wave, at 8 ohm load: 28 W+28 W, OK), sound output test.)
Accessories: power cord, instruction manual (copy)
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: mounting screws
Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g
※The cantilever is slightly to the right. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Thoroughly review the interior and carry out maintenance on capacitors, transistors, etc.! A vintage model representing JBL. In addition to the extremely powerful and well-extruded sound quality, it also has a dry and tight tone unique to this era. The strong sense of energy in the low frequencies and the characters with clear outlines are excellent matches with old JBL speakers. It is a vintage masterpiece that stands out for its individuality. There is a slight feeling of use on the exterior. Serial 2362 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (test switch contact defects, other internal checks. DC leak due to leaks such as C in both ch couplings, poor Tr characteristics in the pre-stage, poor characteristics of the power stage Rch transistor x 1 → replacement. (Each VOL rotary SW is large → all cleaning, ~ operation check)
Accessories: instruction manual (copy), power cord
Main specifications: 40W+40W (8Ω) W412 × H128 × D350 mm 11.8 kg
The price has been drastically reduced. 2024/6/13 sales price 378,000 yen Maintained! This is a Baes regular model 100V specification. The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. In addition to a small scratch on the upper right front and a stain on the top surface, there is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (GAIN VOL replacement, power stage Tr check, driver board Tr.C, meter, power supply board C replacement, MODE SW dismantling and cleaning, meter display lamp replacement)
Accessories: power cord, instruction manual (copy)
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Serial 830693 (Murakoshi Yoichi)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: original box, needle cover, brush
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box, characteristic table
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg