Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained by the manufacturer (due to disconnection of the motor coil of the monitor inside the arm, the arm's UP/DOWN operation is fast and the operation fails → remove the arm and replace it. Arm position detection CDS replacement. Lead in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
This is a speaker system mounted on Altec's coaxial 8-inch unit 409-8E. The compatibility between Yonematsu, which has a good sound, and the bright and light 409-8E is excellent, and drinking drops to the medium to high range, which has a nice texture. The light, mid-range tone goes great with old sauces. There is dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.5.23 Sound output test is good
Accessories: none
Main specifications: Unit used: 409-8E playback frequency band 85 to 18,000 Hz efficiency 97 dB W377 x H432 x D189 (top surface) 238 (bottom) mm 6.4 kg (actual measurement)
Pair tube direct heat triode tube American square getter measurement value 64/60 (rejection value 38) The number of getters has decreased for both tube*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Single sale rectifier tube 5AR4 compatible ball saw plate (4 notch type) code: f32 B4D2 measured value 52 (rejection value 40) with original box ※ measured values are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube double triode tube, made in America, JAN measurement value 80/76 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube double triode tube, made in America, JAN measurement value 74/72 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The pair tube is thought to be made by TESLA due to its 6CA7 compatible ball brown base double ring getter structure. Measured value 52/52 (rejected value 30) with white box ※Pairs are judged based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Sold 1 bottle CV1988/6SN7GTY equivalent ball English tea base measurement value 78 (rejected value 50) with white box*Measured values are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Sold 1 bottle CV1988/6SN7GTY equivalent ball English tea base measurement value 112 (rejected value 50) with white box*Measured values are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Set of 4 large insulators. The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
※It is inexpensive because there are many stains. A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Murakoshi Yoichi)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2024.5.23 sound output confirmed
2022.12.14 Maintained by the manufacturer (tweeter replacement operation test)
Accessories: saran net spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
Tannoy Mercury series small bookshelf. It uses network technology that follows the technology of the company's Prestige “SE” series. Silver-coated copper wire manufactured by Vandenhall is used for internal wiring to enhance sound quality. There are dust stains on the tweeter dome, small scratches such as peeling veneer on the upper front corner, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2 way 8Ω 86dB W140 × H210 × D160 mm 2.2 kg
Pair tube direct heat triode tube American-made smoke measurement value 68/68 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube American-made smoke measurement value 72/70 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Pair tube direct heat triode tube made in Russia measured value 72/72 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
RCA cable 1.0m pair, the company's flagship cable PCUHD/6N high-purity copper wire/silver-plated copper wire/HiFC composite conductor is dull around the plug, and the L/R coloring is slightly peeled off (Kojima Yosuke)
Accessories: original box
Air core coil pair sale, Ritz wire inductance 1.7 mH, allowable input, 300 W (8 Ω), number of turns, 229, DC resistance, 0.36 Ω, maximum diameter 85 x thickness 38 mm, 0.77 kg/piece, with original box (Kojima Yosuke)
Accessories: original box
Output transformer pair for sale single hammer tone color output 20W 1st: 2-2.5-3.5-5kΩ 2nd: 4-8Ω (1st: 2-2.5 kΩ) 8-16Ω (1st: 3.5-5kΩ) W94 x H83 x D84 mm approx. 1.8 kg/piece made by ISO TANGO (Kojima Yosuke)
Accessories: none
Pair tube 6SN7 compatible ball Soviet military measurement value 116/110 (rejected value 50) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
1 bottle sold in England Xf1 6CA7 compatible ball tea base double ring getter date code: Xf1 B1I4 measured value 46 (rejected value 30) with white box (written on the box), there is getter burn, and it has decreased slightly (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube made in Russia measured value 72/70 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
*This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve deterioration replacement. AC cord deterioration, replacement. Main bearing disassembly, bearing thrust wear, replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing or added; nuts, metal washers, and rubber washers added. Running test → OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: none
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
MC step-up transformer. It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide, and the sound quality is relaxed and elegant. There are a few small scratches. Serial T30905032 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: instruction manual
Main specifications: Compatible cartridge impedance 1.5 to 40 ohms load impedance 47 kΩ boost ratio 26 dB W133 x H85 x 129 mm 1 kg
Chinese SMSL D/A converter. ESS's ES9068AS is used as the DAC. Although it is inexpensive, it supports a wide range of inputs such as AES/EBU and I2S. The exterior is dull. Serial 4600010200207 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: input USB, optical, coaxial, I2S, 1 AES/EBU system each, W210 x H40 x D170 mm 1.2 kg
Phono Cable 1.2 m RCA-RCA is a full-scale cable capable of fully floating transmission with a 7-layer double 2-core shield structure with a high-purity 6NCu hybrid core wire. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: original box
This new model uses an unprocessed HiFC conductor for the 1.8 m pair speaker cable and improved the company's popular model SP #79Mk -2. The sound is clear and clear. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
RCA cable 1.2m pair finished LINN black cable If you're a fan of the company, you can't miss this classic cable. You can hear a soft, smooth, detailed, and well-organized sound. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: original box
The RCA cable uses 102 SSC as the 1.0 m pair conductor and polymer polyolefin as the insulator. This is Oyaide's proud work, which is particular about precision processing. I am overwhelmed by how clear the sound quality surpasses the previous model. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
HDMI cable 1.0 m transmission speed 10.2 Gbps to 21 Gbps (varies depending on cable length) The shorter the cable, the faster the transmission speed. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping weight 8.2 g
A multi-combination structure that allows you to select 7 weights by combining 3 types of stabilizers. It makes it possible to fine-tune the sound quality for each record, and it can also be used on record players that are not compatible with heavy stabilizers. (FUJISAWA KOSHI)
Accessories: instruction manual
Main specifications: W69 x H27 mm (when all parts are attached) under (polycarponet) 70g inner (brass+gold plated) 90g upper (brass+uredium plated) 160g
One owner item with original box! Mono cartridge for SP boards. This is a reprint of the CG65D. You can enjoy the SP board with a firm core and a bold tone. There is little feeling of use and the condition is good. Serial 721447 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: instruction manual, original box
Main specifications: MC type needle pressure 4.5 g output voltage 1.5 mV frequency characteristics 20 to 18,000 Hz impedance 6 ohms dead weight 35 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. There are no needle bends. Serial 4623 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. (FUJISAWA KOSHI)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
This is a turntable sheet using TEAC Japanese paper. In order to solve the problem of dust adsorbing on vinyl records, Japanese paper that is less likely to charge electricity is used. We use stone paper with an appropriate amount of mass. (FUJISAWA KOSHI)
Accessories: case
Main specifications: W300 x H300 x D1 mm, weight approx. 44 g
This is an adapter for a NAGAOKA doughnut board. I use it for EP playback, but the machined aluminum gives it a sense of luxury. There is a small scratch. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: machined aluminum, diameter 40 x height 9 mm, weight 20 g
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place a needle. The LCD screen is backlit and equipped with an auto off function. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: original box, case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
RCA cable 0.7 m pair reverse twist structure, brass machined plugs, etc. are RCA cables that have introduced a considerable amount of materials in this price range. It is a sharp cable with medium to high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
RCA cable 0.7 m pair reverse twist structure, brass machined plugs, etc. are RCA cables that have introduced a considerable amount of materials in this price range. It is a sharp cable with medium to high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
RCA cable 1.3 m pair reverse twist structure+polyurethane coated Ritz wire This is a new series with enhanced expressive power in details while keeping the neutral tone intact. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4. An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories