RCA relay plug Mono Lou Mono Pairs Adopts a metal body. You can see the exterior, disappearing characters, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
Parallel adapter for stereo mini plugs There are many ways to use it, such as two people enjoying music at the same time from a single earphone terminal. There is a slight feeling of use (Murakoshi Yoichi)
Accessories: none
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
Standard plug to mini jack plug adapter. A microphone with a mini plug can be used as a microphone terminal on a tape deck, etc. (Mizushima Itsuro)
Accessories: none
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi)
Accessories: case bottom
Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/4/18 sales price 89,800 yen TANGO input transformer, line transformer using NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
Genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
The price has been reduced! 2023/4/23 sales price 8,000 yen*Set of 3 A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: original box spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
This is a 5-layer audio board. It combines high rigidity, high specific gravity, and high damping properties, and strongly prevents floor noise. It is ideal for installing large speakers, etc., and has a sense of volume and adjusts mids and bass in a well-balanced manner. Some dents and scratches are conspicuous (Sasaki Shota)
Accessories: none
Main specifications: W750×H55×D600mm 18.5kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
TAOC rack underspacer and upper spacer set. If you have a spare or lost one, don't miss it. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Key Specifications: 6 upper spacers, 2 underspacers, 3 cast iron knurled nuts
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
Technics machined aluminum EP adapter It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
Tigron's 3-disc tuning spacer suppresses complex resonance that occurs in the installation environment of audio equipment, musical instrument amplifiers, etc., and brings out the original performance of the device. There are footprints and a sense of use (Oikawa Tetsuji)
Accessories: original box
Main specifications: size, diameter: 70 mm, thickness: 3 mm, material: special heat-resistant synthetic rubber, magnesium alloy, load capacity: 30 kg/1 piece
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
The price has been reduced. 2017/10/6 sales price 3,000 yen This is a speaker mounting bracket when using the speaker system PS-S200 series etc. as a ceiling suspension. There are spots, rust, and small scratches on the exterior. One single-sided pin is missing (Wang Exhibition)
Accessories: none
Main specifications: compatible models PS-S224W/WH, PS-S226W, PS-S203W, PS-S204W, PS-S207W,
PS-S550W, PS-S552W, PS-S553, etc. Load capacity 12 kg, angle adjustable 1.13 kg
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Accessories: none
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. There are scratches and dullness on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg