Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/11 sales price 99,800 yen This is the ultimate version of the P-1. It is a pure A grade specification, which is rare for a headphone amplifier, and you can enjoy more detailed and clear playback sound. There is a thin line scratch on the top plate and a small scratch on the upper front, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.1.11 Sound output operation confirmed
Accessories: copy of manual, power cable
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
MARK LEVINSON JC-2 power supply box produced by Rizaye. Operation has been confirmed. The main unit connection cable is not included. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 Operation confirmed (sound output confirmed on JC-2)
Accessories: power cable
Main specifications: W140 x H83 x D204 mm 1.1 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
Luxman high definition speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Operation confirmed (power can be turned on, effect not measured)
Accessories: power cable
Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
It is an audio selector (passive type) for Real Acoustics Studio. There are 4 input systems and 1 output system. It is an easy-to-use car with VOL. There are line marks on the exterior (Hiura Katsuji)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: instruction manual connection cable original box
Main specifications: W150 x H60 x D120 mm weight 464 g
This is a large and medium speaker base using magnesium struts injected with ultra-fine sand. It also creates effective ensembles for other subwoofers. There are scratches and dullness on the exterior (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×D400×H300mm 8,2kg/1 bottle
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
A limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. The exterior is scratched, dull, and has a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The price has been reduced. 2024/4/26 sales price 20,000 yen A convenient speaker selector that can connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
※Operation has been confirmed, but since it is cheap, it will be handed over as is. It is a high-resolution DAC equipped with the high sound quality DAC PCM1794A from TI's audio IC brand Burr-Brown. By using it between a PC and audio, high-resolution playback on a PC is possible, and it delivers powerful and precise sound (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: power cable
Main Specifications: Format: PCM [USB] maximum 24 bit 96 kHz [optical/coaxial digital input] maximum 24 bit/192 kHz digital input [3 systems] USB TypeB terminal/optical digital audio input (square type) coaxial digital audio input SNR: 109 dB dynamic range: 110 dB total harmonic distortion: 0.004% or less (20Hz-20kHz) DAC IC: Texas Instruments Burr- Brown PCM1794A compatible OS: Windows 10/8 (8.1) 7/Vista/XP/2000/macOS X/9.1 or later
The price has been reduced. 2023/6/27 sales price 15,000 yen Qables Potaan is 192 kHz compatible. It supports up to 192 kHz/24 bit via the SPDIF digital input terminal and 48 kHz/16 bit via USB. For those looking for high quality sound anywhere easily (Oikawa Tetsuji)
Maintenance Information: 2023.6.27 Operation confirmed
Accessories: connection cord, case
Main specifications: W70 x H23 x D126 mm 200 g
Krypton outlet plate By tightening the 3-layer neo-fade carbon matrix material with a stainless steel frame, it is designed to have ideal damping characteristics without resonance/vibration. You can bring out the merits of high-resolution sound sources, etc. (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: W70.4 x H114.4 x D4.0 mm approx. 50 g
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 18,000 yen USB isolator Input to USB Type-B and output from USB Type-A. USB low-speed (1.5Mbps) and full-speed (12Mbps) dedicated hubs. Please refer to the manufacturer's website for details. https://octy.co.jp/products/usb20.html ※5V power supply is not included. Please prepare separately (Oikawa Tetsuji)
Maintenance information: 2023.12.10 storefront operation confirmed (5V test power supply is supplied, and sound output operation confirmed by connecting between PC and USB DAC)
Accessories: *USB microB 5V power supply is not included. Please use your own USB adapter or the like.
Main specifications: 110mm×64mm×30mm 230g
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)