The price has been drastically reduced! 2024/5/15 sales price 148,000 yen The X-DP7, which specializes in DACs, has arrived. By inheriting the performance of the X-DP10 and specializing in DACs, a high signal-to-noise ratio has been achieved. It is also DSD compatible, and it is a high quality car with excellent cost performance. There are no noticeable scratches on the exterior. Serial R10939 (Tamura Eiji)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: digital input: USB x 1, OPTICAL x 2, COAXIAL x 2, AES/EBU x 1, CLOCK x 1 analog input: RCA x 2, XLR x 2 analog output: RCA x 1, XLR x 1 PCM: 24, 32 bit/44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768 kHz DSD: 2.8224, 5.6448, 11.2896 MHz (DoP, (Compatible with ASIO 2.2) W420 x H68 x D320 mm weight 5.9 kg
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
USB-A to B terminal conductors are 1.25% silver coated. Silver coating ensures signal transmission performance. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
The price has been reduced! 2023/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Maintained. We have everything from modular units 0 to 4! Very easy to use channel divider. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. As for the exterior, there is a scratch on the upper front. Serial 200731 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (ATT disassembly click mechanism reassembly, mute relay replacement, resistor replacement, missing screw added. Solder correction switches, cleaning wire, restyling. Check all crossover units check frequency characteristics)
Accessories: instruction manual, modules 0 to 4
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
The price has been reduced! 2024/5/8 sales price 45,000 yen ※Pedestal is out of stock. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been reduced! 2024/5/9 sales price 65,000 yen*It is cheap because the paint is in poor condition, such as peeling paint or soldering. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi)
Maintenance information: 2024.5.9 oscillator test is good
Accessories: No accessories
Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/6 sales price 29,800 yen 6 month guarantee. Fourth generation model of Victor's masterpiece speaker SX-500 series representing the 90s. Alnico magnets are used in all units, and the woofer unit has particularly excellent low-level reproducibility, contributing to improved clarity and good tone during quiet sounds. The exterior has scratches and dullness over time. Serial 10800021 (Yamato Yuki)
Maintenance information: 2024.5.6 sweep test is good
Accessories: none
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic type, 20 cm cone type for low range/3.5 cm dome type impedance 6 Ω for high range, output sound pressure level 90 dB, W270 x H454 x D 293 mm, weight 12.5 kg/book
The price has been reduced! 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with upper and lower 20cm woofers. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
ELAC's classic MM cartridges. The tone spun out of the gold body is a firm tone, and you can enjoy the subtle high frequencies and the warm MM-like thickness (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: mm type output 5.5 mV playback frequency band 10 Hz to 25,000 Hz needle pressure 0.75 to 1.5 g dead weight 6.5 g
※Only 1 output transformer push-pull output primary: 4 kΩ Secondary: 4-8-16 Ω W53 × H65 × D69 mm 0.8 kg (actual measurement, not including protrusions) There are paint peeling and rust spots in places (Kojima Yosuke)
Accessories: none
MC cartridge compatible with EMT arms by attaching the SPU body and Audiocraft adapter OF-3A to the modified headshell. You can enjoy the gorgeous and expansive sound typical of an orthophone with the EMT arm. The cantilever is moving very slightly to the right (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: MC type output 0.2 mV for EMT arms, proper needle pressure 4 g, internal impedance 2 ohms, dead weight 24 g
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply unit
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
※ It is inexpensive because the saran does not break or the LF+ speaker terminal on one side does not tighten until the end. Slim tall boy speaker. MONITOR AUDIO's middle class, SILVER series, is now in stock. The RS8 has a delicate, highly clear mid to high range tone with good tightness in the low range. The owner has well-balanced characters that can be used from the living room to the tatami room. In addition to dullness and small scratches on the exterior, there is a feeling of use such as a tear on the saran net and sunburn on the main body. Serial 801702/801702 (Tomonori Asae)
Maintenance information: 2024.5.17 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: Format: 2.5-way 4 speakers, floor type (anti-magnetic), front & rear port, bass reflex impedance, 6 ohms, allowable input, 175 W, efficiency, 91 dB, frequency characteristics, 33 Hz to 25 kHz, W185 x H900 x D 270 mm, weight 21.0 kg
Digital cable, 1.0m, RCA terminal, zero crystal silver conductor, has good sound accuracy for faint sounds, and is characterized by a steady sound. It is a cable that can be obtained at a relatively low price among the company's cables, which have many high price ranges (Kojima Yosuke)
Accessories: none
A semi-permanent contact conductive agent that made krypton a major. Carbon+Diamond Ultrafine Particles It's about half a bottle in it (Murakoshi Yoichi)
Accessories: package
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg