The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
※There is no problem with operation, but since it is cheap, it is being handed over as is. A speaker that uses a silk OMF diaphragm. The response is fast, and the mid to high range sound is produced well. The impression is that it is suitable for female vocals, jazz pianos, etc., and has a luxurious real wood veneer finish. Serial 5990510607/5990510607 (Tomoho Asaine)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex, 4 ohms, frequency band 45 Hz to 35000 Hz, W180 x H305 x D270 mm, 5.1 kg
※ It is inexpensive because the saran does not break or the LF+ speaker terminal on one side does not tighten until the end. Slim tall boy speaker. MONITOR AUDIO's middle class, SILVER series, is now in stock. The RS8 has a delicate, highly clear mid to high range tone with good tightness in the low range. The owner has well-balanced characters that can be used from the living room to the tatami room. In addition to dullness and small scratches on the exterior, there is a feeling of use such as a tear on the saran net and sunburn on the main body. Serial 801702/801702 (Tomonori Asae)
Maintenance information: 2024.5.17 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: Format: 2.5-way 4 speakers, floor type (anti-magnetic), front & rear port, bass reflex impedance, 6 ohms, allowable input, 175 W, efficiency, 91 dB, frequency characteristics, 33 Hz to 25 kHz, W185 x H900 x D 270 mm, weight 21.0 kg
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
Genuine RF Enterprise with side panels Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a thick, supple sound reminiscent of a record, and the intensity of the mid-range is outstanding among many CD players. There are no visible scratches on the exterior, etc., and it can be said that it is good over time (Kobayashi Hitoshi)
Maintenance information: 2014.6.12 maintained (back UP battery fluid leak, poor insulation → battery removal, insulation treatment, supercapacitor replacement, other analog part bypass C, coupling C replacement, front button all dismantling, contact all polishing, operation check)
Accessories: instruction manual, power cord
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
Scarce! Vintage join Made In GDR (former East Germany) 20cm full range speaker. I immediately rang it at the storefront. It's an old full range speaker, so to be honest, the high and low frequencies don't come out at all compared to modern speakers, but the old piano trio is a perfect match and the mid-range is rich. The speaker has an attractive, soft, and deafening sound without making a harsh sound. There are scratches on the corner of the cabinet, and there are small scratches and line scratches overall (Sasaki Shota)
Maintenance information: 2024.5.18 Sound output operation confirmed
Accessories: none
Main specifications: 20cm full range 5Ω W315 x H525 x D210 mm 9.1 kg (actual measurement)
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Maintained. We have everything from modular units 0 to 4! Very easy to use channel divider. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. As for the exterior, there is a scratch on the upper front. Serial 200731 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (ATT disassembly click mechanism reassembly, mute relay replacement, resistor replacement, missing screw added. Solder correction switches, cleaning wire, restyling. Check all crossover units check frequency characteristics)
Accessories: instruction manual, modules 0 to 4
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Speaker cable is a current CARDAS entry series speaker cable with an unprocessed 4-core structure with 1.5 m pair terminals. Use Perfect Surface Copper. The high frequency extension of the single line and the Ritz line is an appeal that cannot be obtained anywhere else. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: No accessories
※For business use, it will be handed over as is. Although it has a compact body, it is a professional power amplifier that can output 60 W/channel with an 8 ohm load. The driving power that easily drives small to medium class speakers is attractive. It can also be used as a 200W/8Ω mono amplifier with a bridge connection. The exterior is dull. Serial 2B-213896 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W W482.5 x H44.4 x D254 mm 8 kg
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Flat speaker with 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg [actual measurement)
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Maintained by the manufacturer. It has an aspect as an entry model, but it is a model where you can fully enjoy the uniqueness of Accuphase. In addition to the wide range, it is supple and has a slight sex appeal, so you can enjoy it for 12 minutes. A powerful unit that sounds regardless of whether it is a large or medium speaker. In addition to conspicuous marks on the exterior and top plate, a feeling of use such as dullness, stains, and threads can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 manufacturer maintenance (push switch, volume, etc., cleaning, parts replacement, decorative plate installation, inspection of each part, adjustment, safety check, pressure resistance check)
Accessories: power cable, remote control, manual
Main specifications: 100W+100W (8Ω) parallel push-pull output stage current feedback amplifier circuit W475×H170×D424mm 21.4 kg
RCA cable 1.0m pair 6N oxygen-free super annealed The cable is soft, so it's easy to handle. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
An OFC copper wire/OFC copper wire horizontal shield is used for the masterpiece “Negrex 2497” 1-core shield wire/core wire recommended by Mr. Kaneda for a 1.0 m pair of RCA cables. The sound quality is flat and well-balanced (Tomonori Asae)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, PCOCC conductor, it is a clear, well-contoured sound typical of Audio-Technica. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness or oxidation. (ASAINE Tomonori)
Accessories: none
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
Maintained by the manufacturer! A pre main amplifier with excellent cost performance. Even though it's an entry class. It has a thick, well-balanced sound and sounds well. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior is scratched and dull, and has a slight tobacco smell. Serial 9111550397 (Yamato Yuki)
Maintenance information: 2024.5.17 maintained (SP relay replacement amplifier board inspection loudness, source direct SW rework sound test)
Accessories: Power cable, copy of instruction manual ※ remote control missing
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz W434 x H134 x D407 mm 14.6 kg
Piezoelectric film super tweeter. With ultra-high frequency playback up to 120 kHz, I get the impression that you can hear the ultra-high range, realism, and even breathing. The exterior has a feeling of use such as dullness and small scratches (Tomoho Asaine)
Maintenance information: 2021.4.22 operation confirmed
Accessories: instruction manual, connection cable, AC adapter adjustment CD
Main specifications: Tweeter part: W125 x H88 x D93 mm body: W120 x H60 x D260 mm
It has been fully maintained with attention to detail, from exterior painting to gap cleaning! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Murakoshi Yoichi)
Maintenance information: 2024.5.14 maintenance (exterior painting, new saran net replacement, unit maintenance (magnetic circuit rust removal in both low and high ranges, in-gap cleaning, center adjustment, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal contact cleaning) unit detachment, terminal replacement, new wiring)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
*The arm base is convenient, and the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
ELAC's classic MM cartridges. The tone spun out of the gold body is a firm tone, and you can enjoy the subtle high frequencies and the warm MM-like thickness (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: mm type output 5.5 mV playback frequency band 10 Hz to 25,000 Hz needle pressure 0.75 to 1.5 g dead weight 6.5 g
Unfortunately, production of the 4312 monitor is a miniature bookshelf speaker. It is a speaker with dry low frequencies, sharp high frequencies, and a compact yet comfortable speaker that can be played energetically like a JBL. The exterior has dullness and slight sunburn on the back corner. Serial FY0009-008869, FY0009-008870 (Murakoshi Yoichi)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: 3-way bass reflex system bookshelf frequency characteristics 55 Hz to 50 kHz crossover 7 kHz, 12 kHz impedance 6 ohms output sound pressure level 90 dB W181 x H300 x D180 mm 4.0 kg
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ/7 kΩ secondary: 4/8/16 Ω W56 x D50 x H80 mm 0.79 kg/piece with original box (Kojima Yosuke)
Accessories: original box
*The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches, line marks, etc. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
C-Quenze series woofers are in stock from Danish Audio Technology. Strong magnets are combined with soft edges and dampers to produce an amazingly rich finish and firm bass. Serial 26877, 26883 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: aperture: 15 cm, impedance: 8 ohms, output: 120 W, efficiency: 88 dB, outer diameter: 155 mm, depth: 74 mm, opening dimensions: 131 mm, weight: 2.0 kg
Digital cable, 1.0 m, 110 ohm, AES/EBU standard, a combination of reliable Belden and Neutrik. The high cost performance is outstanding. (FUJISAWA KOSHI)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: No accessories
USB-A to B terminal conductors are 1.25% silver coated. Silver coating ensures signal transmission performance. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Sound Magic horizontal 2-tier rack. Uses 38mm diameter struts and high-compression, high-mass 19mm thick special MDF. A circular cut is applied to the back to make the cables easier to put together. The exterior has bumps, dirt, threads, etc. ※Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: spike, spike base
Main specifications: W1,138 x H476 x D501 mm weight 28 kg load capacity 80 kg/shelf
Q ACOUSTICS 2-WAY BOOKSHELF. Once the setting is decided, you can enjoy a variety of music genres with a sense of scale that makes you doubt the size. There are dents around the upper corner on one side, and there is slight dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, rubber feet
Main specifications: 2 way 6Ω 88dB W170 × H260 × D226 mm 4,6 kg
There is a slight gap in volume, but it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
Sold 1 bottle, 6SL7 high-reliability tube, made in America, red brown base, black plate, measured value 58 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box