4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. There is overall dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cable, instruction manual
Main specifications: High-rigidity 6-block, separate chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Hi-Fi is in stock for the first time! It was brand new, unopened, but I opened it for testing. These wireless headphones were produced for a limited time to commemorate the 60th anniversary of the movie 007. Homages to James Bond are included everywhere, and it is a must-see model for fans that combines the symbols of B&W and 007 (Mizusaki Ryo)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 40mm dynamic full range/driver x 2, battery life 30 hours, charging method, USB-C terminal, W189 x H233 x D63 mm, weight: 320 g
Beautiful item with original box! An introductory model of an MC cartridge equipped with an oval needle bonded to an aluminum cantilever. It features delicate, clear, and highly transparent expressions. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
※The display is uneven, so it is inexpensive. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
The world's standard club mixer model, which won the Best Club Mixer award in 2002 and 2003. Equipped with a 4-band EQ, the 4 dual stereo channels can be freely crossfaded, and are compatible with various mix styles and performance styles. High sound quality is also a factor in its popularity. It is dull and has a feeling of use. Serial X262120X172629 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 6 x dual stereo input 4 x RIAA (phono) input 2 x microphone input 4 band EQ high quality P&G/VCA fader analog VCF x 2 channel & master/cue peak meter split cue function booth monitor out frequency characteristics 20hzto40kHz+0/-1dB maximum power consumption 30W size W320 x H105 x D358 mm 5 kg
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
Beautiful item with original box! The MK2 CLUB from the Concorde series with an integrated headshell, is a staple of DJ play, and is now in stock for the first time at Hi-Fi. It is clear and stands out for its wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main Specifications: Output voltage: 8mV Channel separation: 25dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Stylus: Special Elliptical Appropriate Needle Pressure: 3g Dead Weight: 18.5g
High power amplifier using a fully balanced Class D amplifier. The high output of 300W and plenty of driving power are attractive. It reproduces PC audio with low distortion and wide range. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord, adapter, original box
Main specifications: 300W×2 (4Ω) 165W×2 (8Ω) W200×D155×H41mm 0,7kg
Hi-Res Audio & Hi-Res Audio Wireless Bluetooth 5.1 Compatible DAC Preamp Equipped with various functions, it is compatible with a wide range of PC audio. Equipped with an AK4499ExDAC, the sound quality of the Bluetooth sound source has been greatly improved. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: PCM 44.1kHz-768kHz/16-bit - 32bit, DSD (native) DSD64-DSD512, DSD (DOP) DSD64-DSD256, coaxial/opt-in: PCM 44.1kHz-192kH/16 bit 24-bit W347xD276xH10.2mm 1.56 kg
Maintained! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
Maintained by the manufacturer! Marantz Primaine has an attractive thin and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers also go well together, so you can choose any music genre. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.16 Checked by the manufacturer
2023.12.3 Maintained by the manufacturer (Source Direct has gaps. No parts are available. Contact cleaning. Power switch movement correction (because it is not available). (Other operation checks)
Accessories: remote control, instruction manual, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Comes with original box Oyaide high quality power plug. The dual monocoque housing made of POM and aluminum has outstanding mechanical strength, and also boasts excellent vibration damping characteristics and noise resistance. Then, beryllium copper was newly adopted for the electrode part, and two-layer platinum+palladium plating, which was determined repeatedly through thorough audition tests, was used for plating (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: Suitable for cables, outer diameter minimum 6.5 mm maximum 17 mm
The price has been reduced! 2024/5/29 sales price 89,800 yen Hi-Fi pre-main amplifier for the network & streaming era. Network playback of high-resolution sound sources (up to DSD 5.6 MHz, PCM192 kHz/24 bit) and streaming services such as Amazon Music, AWA, and Spotify can be performed without using an external player, etc. The exterior is good with no conspicuous scratches. Serial BLP27191000468 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: remote control, instruction manual, power cord, antenna
Main specifications: rated output 60W+60W (8Ω) streaming (Amazon Music, AWA, Spotify, etc.), internet radio, high-resolution file playback compatible W440xH125xD379mm (when the antenna is laid down) W440 x H190 x D379 mm (when the antenna is erected) mass 10.8 kg
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and furthermore, when used in combination with a stabilizer, the warpage of the record board is corrected and appropriate traces can be expected. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
The price has been reduced. 2024/6/1 sales price 598,000 yen rare items have arrived! Swiss-made electro Voices It features a thick sound unique to wood horns, and tight low frequencies. The goodness of construction shines through. It is equipped with a laminated wood horn, and I want to raise the volume and make a sound. Please experience the natural tone of an acoustic guitar and the subdued sound of the wood bass. The exterior has scratches on the corner, paint chips on the back, and other overall line damage (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: Swiss 2 way 2 speakers, efficiency 93 dB, impedance 10 ohms, external dimensions W378 x H590 x D325 mm, weight: 28.5 kg
Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The price has been reduced. 2024/5/29 sales price 44,800 yen This is an attractive quad bookshelf type speaker with a beautiful finish and rich musical expressiveness. The calm stringed instruments and highly textured piano expressions are suitable for classical music. The exterior has a broken dowel in the upper left corner of the saran net on one side, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: saran net, jumper plate
Main specifications: 86dB 6Ω 45Hz to 28,000 kHz W190 × H310 × D243 mm Weight 6.3 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual cartridge, EP adapter, subweight
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Maintained! An eye-catching diamond-tone power amplifier with a rugged design. The extrusion of the mid-range is clear and the sound is slightly firm, but the sound is good, so it seems to go well with jazz and rock. There are small scratches and dents on the exterior as a whole (Mizusaki Ryo)
Maintenance information: 2024.6.1 Maintained (replacement of deteriorated transistors and capacitors in each circuit. Input volume and output relay contact correction. Electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 2 mono construction system 100W+100W (8Ω) W425×H170×D285mm 16.5 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
For the first time in about 8 years, Mysonic Labs ultra-low impedance mono MC cartridges have arrived! It is a cartridge designed to extract as much information as possible from mono LPs. Even though it's clear, you can feel the richness of the relaxed sound, and it makes me reaffirm the goodness of mono LPs. Serial A577 (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual, original box, needle cover, brush
Main specifications: Ultra low impedance MC cartridge frequency range 10 Hz to 50 kHz output voltage 0.4 mV impedance 1.2 Ω needle pressure 3 g
Maintained! This is a JBL mid to high range driver. It is also used in the S2600 and S3500, etc., and the well-balanced sound quality with both strength and subtlety is truly a JBL. It can be used on various systems with easy-to-use specs. The exterior has peeling paint, dullness, etc. Serial 041250 041277 (Yonejima Satoshi)
Maintenance information: 2024.6.1 maintained (diaphragm installation adjustment, pad dampener and screw connections OK. DCR (041250/3,4ohm diaphragm no scratch) DCR (041277/3,0ohm diaphragm no scratch))
Accessories: No accessories
Main Specifications: High Range Driver Throttle Diameter 25mm Impedance 8Ω Frequency Range 500Hz to 20kHz Pure Titanium Crossover Frequency 800Hz W147 x H147 x D105 mm 4.3 kg
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
A preamp for the company's high-end audio Reference series. In addition to adopting a fully balanced amplification system with positive and negative symmetry from input to output in the transmission circuit, accurate transmission of audio signals is achieved by arranging the same boards on the left and right audio circuits to form the same circuit on the left and right. There are no visible scratches on the exterior, etc., and it is good with just dullness. Serial NKPK000049JP (Takasaki Atsushi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: remote control, copy of instruction manual, power cable, connection cable, original box
Main specifications: input terminal balance ☓ 3 unbalance ☓ 3 output terminal balance ☓ 2 unbalance ☓ 2 body dimensions W450mm ☓ H150mmD440mm 29kg power supply dimensions W220 ☓ H185 ☓ D430 mm 15 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
The price has been drastically reduced. 2024/5/17 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. In addition to large dents on one side, there is a light feeling of use and dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
Maintained! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to a thick, analog-like sound quality that comes out well. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 21120262 (Jun Tamai)
Maintenance information: 2024.5.19 Maintained (motor bearing oil replacement deteriorated parts (electrolytic capacitor semi-fixed resistance rectifier diode) replacement tone arm disassembly/shaft bearing replacement lifter disassembly/grease up speed switching SW rotation fine adjustment volume disassembly/contact polish since the insulator has deteriorated, replaced with a replacement product turntable rotation speed confirmation arm operation needle pressure confirmation exterior cleaning sound output test (Other operation confirmation dust cover newly created)
Accessories: instruction manual overhang gauge
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
The next generation model of the L-550AX has been reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring the glossy and dense sound unique to pure A class amplification systems. There are no noticeable scratches on the exterior. Serial G60800238 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
This is the 3rd generation model of the 500 series with the familiar clean power supply. It secures and supplies clean power that is free from dirty electricity mixed into the home. Now in the 3rd generation, it is an excellent item where progress can be seen not only in the transparency of the mid to high range, but also in the sense of energy in the low range. As for the exterior, there are line marks on the back. Serial D2Y023 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output capacity 510VA, rated output voltage AC100V±1V output outlet, 3P x 8 meters/input/output voltages, strain rate, etc. Switch between 6 types and display W465 x H181 x D386 mm 23.8 kg
Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord, RCA cable, original box
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg